Photo of Rare Mint 1985 Sony FH-5 Compact High Density Component System *Read
$400
Rare Mint 1985 Sony FH-5 Compact High Density Component System *Read
Cosmetically this unit is in mint condition, I would say it’s a 9.5/10. Priced to sell. These sell for crazy money, working or not. This hefty “Boombox” is actually comprised of 3 separate components held together by metal brackets and 2 detachable speakers. The heavy duty handle is removeable. Weighs 30lbs without batteries! Runs on AC or optional 10 X D cell batteries. Has 3 sets of RCA inputs, 1 is a dedicated phono input (built in MM pre-amp) and 2 are for a CD player, etc. The sound that pumps out of this thing is nuts. Components have had all the switches and pots cleaned with DeoxIT. Tested and everything besides the tape deck is working as it should. Also tested with a turntable. *Note: The tape deck is not functioning. Just had the belts replaced professionally and they noticed that one of the idler wheel assemblies has an issue. They tried to correct the problem, and it worked for a few days, then stopped working properly. Brought it back to them and they told me that it would need to be replaced. They could not find a replacement. Individual Components: TC-58 Tape Deck - Auto-reverse playback, automatic recording level, auto play and automatic sensor. ST-58 Tuner – AM/FM stereo with telescopic antenna and inputs for optional external antenna’s TA-58 Integrated Stereo Amplifier – 2 X 25 W into 8 ohm speakers on AC power or 2 X 3.5 W on battery power. Phono input plus 2 more RCA inputs. Built in 5 band graphic equalizer. APM-058 Speakers – 3-Way super wide speaker system, 4 ohm, 25W (nom) 50W (peak)
categories:Household ItemsElectronics
528 impressions
102 views
Edmonton, AB4 days ago
Photo of Various Ammo for sale
$100.00
Various Ammo for sale
01.Winchester X-Super Match .38 Special 148 GR,Box of 50-$40.00 each (2 boxes). Winchester .38 Special 158 GR. Box of 50-$40.00 Remington .38 Special 158 Gr. Box of 50-$40.00 UMC .38 Special 130 Gr,Box of 40-$35.00 Smith & Wesson 38 Special Wad Cutter Ammo 148 GR 50 pcs.box-$20 per box (2 boxes). Winchester 38 Special Wad Cutter Ammo 158 GR Lead 50 pcs.box-$20.00 S.Plant 38 SP.Wad Cutter Ammo 141 GR.Lead 45 pcs box-$20.00 S.Plant 38 Special Wad Cutter Ammo 148 GR.Lead 50 pcs.box-$20.00 per box (10 boxes). Smith & Wesson 38 Special 140 GR.Lead 50 pcs. box-$30.00 Winchester 38 Special 158 GR. Semi Lead 50 pcs. box-$30.00 per box (3 boxes). 02.Winchester .357 Remington Magnum 125 Grain Jacketed Soft Point Box of 23-$20.00 Remington .357 Magnum 158 Gr Soft Point,Box of 48-$35.00 American Eagle.357 Magnum158 GR. Jacked SP, Box of 40-$30.00 03.Winchester USA .40 S&W,FJM 180 Grain Box of 50 (5 boxes).-$45.00 each Blazer .40 S&W 180 FMJ Box of 50 (2 Boxes).-$45.00 each 04.Custom 45 ACP 200 gr , Box of 50 (2 boxes).-$50.00 each Custom 45 ACP 254 gr, Box of 50 -$50.00 Hornady Custom 45 ACP 200 gr XTP, Box of 20 (3 boxes +13).-$45.00 each 05.D.C.co.Colt .455 Webley caliber 17 pcs.-SOLD 06.Canuck 32 Rim fire Long 80Gr.bullet box of 43 pcs.-$250.00 01.Remington 6.8 SPC 115gr OTM box of 20 (2 boxes).-$45.00 each 02.Winchester 7 mm.rem.mag. WW Super 175 GR. 20 pcs.no box-$50.00 Remington 7 mm.rem.mag. Soft point 175 GR. 18 pcs.no box-$45.00 Winchester 7 mm.rem.mag. WW Super 175 GR. 14 pcs.no box-$35.00 Federal .7 mm.rem.mag. 150 GR. 17 pcs.no box-$40.00 03.Remington .35 Whelen 200 Gr Express core lokt,box of 20 plus 2 rounds and 12 used cases-$55.00 04.Hornady Superformance .338 Win.mag.185 Gr.GMX,box of 20 -$85.00 05.Federal 300 WSM 200 Grain, Terminal Ascent, 2810 fps-$90.00 Box of 20.-2 boxes. 06.Winchester 270 WSM Deer Season XP Extreme Point Rifle Ammo, 130Gr-$90.00 07.Sellier & Bellot 7x64 140 GR. Soft Points box of 20-$50.00 per box (3 boxes). Prvi Partizan 7x64 140 GR. Soft Points box of 20-$50.00 Prvi Partizan 7x64 140 GR. Soft Points box of 14-$35.00 08.Hornady LeverEvolution 44 Mag 225gr FTX 20rds-$50.00 each (2 pcs). Sellier & Bellot Ammunition 44 Magnum, 240gr SP Box of 50-$70.00 Local is preferred. Valid Pal a Must. Please send message to: medal1958@gmail.com
categories:Sporting GoodsGuns
35998 impressions
1366 views
Toronto, ON4 days ago
Photo of Quick Detach (QD QDM) Sling Mount Kit - Single and Double Sided - Stainless Steel
$20
Quick Detach (QD QDM) Sling Mount Kit - Single and Double Sided - Stainless Steel
Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)
categories:Sporting GoodsGuns
9574 impressions
1037 views
Edmonton, AB4 days ago
Photo of Thread Protector with High Temperature Viton Rubber O-Ring - 1/2"x28" *Free Shipping*
$20
Thread Protector with High Temperature Viton Rubber O-Ring - 1/2"x28" *Free Shipping*
Description - Thread Protector with high temperature retaining O-Ring (up to 400°F) - Friction and Compression of the O-Ring retains the Thread Protector and prevents it from loosening off *Extreme rapid discharge will result in temperature exceeding 400°F and loosen the Thread Protector Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Tracked shipping (for an additional cost) available upon request. Brand: Created by Cay (Yes it's my original design) ___________________________________ What's Included - 1x Thread Protector 1/2"x28" - 1x Viton O-Ring Thread Protector Specifications - Material: AISI 4140 Steel - Finish: Knurled Matte Black Oxide (Blued) - Weight: 0.5oz (14g) - Dimensions: OD: 0.728" (18.5mm) / Length: 0.492" (12.5mm) - Weight: 0.5oz (14g) O-Ring Specifications - Material: Viton® Fluoroelastomer Rubber - Finish: Black - Max Temperature: 400°F (204°C) - Hardness: Durometer 75A (Medium) - Dimensions: OD: 0.591" (15mm) / ID: 0.472" (12mm) / Width: 0.060" (1.5mm) - Finish: Black *5/8"x24 coming soon Instructions 1. Check and make sure the firearm is unloaded. 2. Loosen off the stock thread protector or muzzle device in the counter clockwise direction. 3. Clean the thread (if necessary). 4. Install the High Temperature O-Ring over the threaded barrel. Do not overstretch the O-Ring, light pressure is sufficient the slide the O-Ring over the threads. 5. Install the Thread Protector in the clockwise direction. 6. Note that the Thread Protector can be installed in either directions. The smooth direction facing the O-Ring for more compression/friction or the cutout direction facing the O-Ring for a flush/clean connection. ***Video Instructions Coming Soon***
categories:Sporting GoodsGuns
17597 impressions
613 views
Edmonton, AB4 days ago
Photo of Ruger PC Carbine PCC - Upgrade Parts/Kit Package
$1
Ruger PC Carbine PCC - Upgrade Parts/Kit Package
As of 2024-12-05, this product is no longer available for sale. Next expected availability October 2025. Stay strong Canada! Shipping across Canada included, *Email only please* 1 Part - $25 Shipped 2 Parts - $35 Shipped 3 Parts - $45 Shipped 4 Parts - $55 Shipped (Full Upgrade) *+$10 for the Low Profile Front Optic Rail **Any combination of the parts are available ***EMT is King Shipping via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design/invention/product) Double Tap Trigger Over Travel Limiter - Replaces the Factory Trigger Spring Plunger - Reduce the Over Travel by 85% for Quick and easy "Double Taps" - Material: Precision Machined Stainless Steel Extended Charging Handle - Replaces the Factory Charging Handle - 50% Longer and Knurled Finish for Easy Access - Material: Black Anodized Aluminum Extended Magazine Release Button - Replaces the Magazine Release Button - Larger Textured Protruded Release Button for Easy Access and Quick Magazine Change - Material: Black Anodized Aluminum Barrel Mounted Optic Rail - Mounts on the Barrel (Replaces Factory Rear Sights) - Prevents Optics from Losing Zero from Take Down - Rail Height is the same as the Receiver - Optional 3rd Mounting Hole. Rail can now be mounted forward/backwards 1/2". *Only 2 of 3 screws is sufficient for mounting. - Material: Black Anodized Aluminum Low Profile Front Optic Rail M-Lok - Mounts on the M-Lok handguard - Rail Height is the same as the Receiver - Designed to fit most front backup sights (BUS) secured via a single screw - 2x M-Lok Screw/Nut included - Black Anodized Aluminum
categories:Sporting GoodsGuns
159701 impressions
13813 views
Edmonton, AB4 days ago
Showing 21 of 863 records
Location
Search within
of
Categories

Other9
Medical Equipment3

Transportation options

Local Pickup755Can Deliver77Can Ship260