MECHANICAL TRIGGER SOLD… This has been my competition gun for a few years. It has operated flawlessly and has been maintained immaculately. Stripped down, cleaned and serviced yearly by Coles Fine Guns and Gunsmithing in San Antonio. Action is as tight as it was new. Last service replaced many worn parts and cost $600 USD, Last serviced: Fri, Oct 3, 2025   Includes: Briley Sub Gauge Tube Set (20g,28g,410) Briley extended Sub Gauge Chokes Beretta Factory Chokes Beretta DT11 dropout trigger converted to light inertia to shoot sub gauges Jones Thru the Pad Adjustable Butt Plate Brand new, never used Kick EEZ recoil pad Beretta Spare Parts (many items, same as when gun was new) Negrini Tube Set (Locking) Gun Case

categories:Sporting GoodsGuns

1903 impressions

153 views

I bought this shell ejecting foam dart blaster, and took it apart to try and clear a Jam. Sadly, I do not know how to put it back together. Selling for $50, because it cost me ~$150 online. Might be good for cosplay, or if youre good at fixing things you might be able to get it working again. I still have all the internal parts.

categories:Sporting GoodsPaintball and Airsoft

2468 impressions

381 views

Selling my Novritsch SSG24 with two magazine $800 obo. Willing to let it go, it's been a very reliable gun since day one of purchased. I have done some upgrades on it that makes it more reliable and fun to use. Upgrades: Newly change M150 spring. New Hop-Up bucking installed. Tridos Pro TDC 2.0 Chamber. Tridos TDC 2.0 arm and nuts. Tridos TDC 2.0 Nubs. Tridos Trigger dust cover. Tridos Bipod stud holder. Sniptor R-Hop patch Comes with Tridos accessories: Tridos Speed loader adapter Tridos Mag unloader

categories:Sporting GoodsPaintball and Airsoft

3356 impressions

477 views

Brand new from purchase in early 2022. Made in Japan. This rifle has never had a single shot fired in it, it never even made it out to the gun range. It has never been cleaned or disassimbled. It has stayed in it's case in dry storage for 3 years. This was puchased through Rangeview Sports in Ontario, see the attached recipes for proof. I am currently taking reasonable offers, I originally paid over $1600.00 for it. Though RangeView Sports doesn't carry this anymore, here is a link from GoTenda if you want to see the specs: https://www.gotenda.com/product/howa-m1500-apc-308-win-24-bolt-action-rifle-101/ Located in VICTORIA, BC -- anyone purchasing must make arrangements to pickup or to pay for shipping via Canada Post (I have used in the past with success). Comes with all accessories, mag, scope, trigger lock, backpack Saviour carrying case, bipod, strap, and pistol grip.

categories:Sporting GoodsGuns

834 impressions

344 views

For sale is a brand new (in-box) Ruger-made Marlin 1895 GBL "Guide" model, chambered in .45-70 Govt. This model has a brown laminate (checkered) stock & forend, with satin (blued) metal finish. It has a 19.1" cold hammer-forged barrel, threaded for a muzzle device (also c/w a thread protector). It also has a 'big-loop' lever (for ease of use). It comes with semi-buckhorn (adjustable) sights. In addition, a Mid-West Industries (MI) picatinny lever-rail is installed from the factory (for mounting optics). The box, and all other accessories (owner's manual, cable lock, hammer extention, tags/stickers etc.) are included as well! It is in excellent plus condition and has never been used (except factory test rounds).

categories:Sporting GoodsGuns

4885 impressions

228 views

For sale is a brand new, in-box, Ruger-made Marlin 1895 'Guide Gun', chambered in .45-70 Govt. This model has a brown laminate (checkered) stock/forend, with blued metal finish. It has a 19" cold hammer-forged barrel, threaded for a muzzle brake (c/w thread protector). It also has a big-loop lever. It comes with semi-buckhorn (adjustable) sights. In addition, a Mid-West Industries (MI) picatinny rail is installed from the factory (for mounting a scope). The box, and other accessories (owner's manual, cable lock, hammer extention, tags/stickers etc.) are included as well! It is in excellent plus condition and has never been fired (except factory test rounds).

categories:Sporting GoodsGuns

3881 impressions

181 views

Gun stock duplicator is new custom made it is complete unit and ready to use to dupliced stock ,carving parts or more On 110 volts For sale trade consider for quality gun ,mill lathe ,honda gen or ?

categories:Sporting Goods

1054 impressions

125 views

The replica stands out from other G&G replicas in terms of internal parts used as well as the quality of exterior craftsmanship. The replica features two electronic systems: MOSFET system located in the stock slide and a G2 ETU (Electronic Trigger Unit) system. Both systems extend the lifetime of the replica and improve its parameters like the trigger reaction time and rate of fire. The MOSFET system enables the programming of 3-5 round bursts, informs about low battery charge and a damaged gearbox. Specifications: Material: Polymer + metal + steel Weight: 2920 g Length: 475 – 715 mm Muzzle Velocity: ~380 FPS Engine: Electric Manufacturer: G&G Please note as with all high-quality AEGs this does not come with a battery or charger

categories:Paintball and Airsoft

9274 impressions

809 views

Up for sale is a custom build Rossi 92 Stainless in 45 Colt. 16” barrel. I have added a Midwest Industries M Lok hand guard, a Ranger point precision butt stock, 2 Ranger point quivers. Will include a beautiful leather scabbard as well. Also has a leather wrapped lever. Its new never fired. All other parts are new. Also comes with original wood furniture as well. (Can be sold for $100–$150) if you don’t want it. This is the new craze now having tactical Lever guns. This set up costs around $2700 retail with taxes . So a nice discount Cash sale Price is $1800 Local Toronto/GTA (Mississauga) deal for now. Cash is king but will consider trades for… Brand new Benelli M4, Beretta 1301 tactical. Browning BLR 223 new or like new. Henry 223. New only. These are the only trades I will consider Thanks. Check out my other ads.

categories:Sporting GoodsGuns

1202 impressions

61 views

The G&G SGR556 is a high-performance airsoft rifle designed for players who demand power, accuracy, and versatility on the battlefield. This rifle is based on a popular platform, with a durable and reliable construction that can withstand intense gameplay. The SGR556 features a full metal receiver and outer barrel, giving it a sturdy and realistic feel. It has a modular design, with a M-LOK handguard that allows players to add accessories such as grips, lights, and lasers to customize the rifle to their preferences. The SGR556 also features flip-up front and rear iron sights for improved accuracy, and a removable carrying handle for mounting optics. The SGR556 utilizes the G3 system, which means that it has a full metal gearbox with 8mm bearings for reliable and consistent performance. It also includes an adjustable hop-up system for increased accuracy. In terms of power, the SGR556 boasts an impressive muzzle velocity of 400-410 fps with 0.20g BBs, making it a formidable weapon on the battlefield. It’s also compatible with a wide range of battery types, including 7.4V and 11.1V LiPo batteries (not included). Overall, the G&G SGR556 is a top-of-the-line airsoft rifle that combines power, accuracy, and versatility in a sleek and durable package. Whether you’re a seasoned airsoft player or just starting out, the SGR556 is a weapon that you can rely on to dominate on the field. The G3 system ensures that you’ll have a reliable and consistent performance every time you use it. Product Specifications: System: Electric Caliber: 6mm Magazine Capacity: 450 rounds Hicap Muzzle Velocity: 400-410 fps (with 0.20g BBs) Inner Barrel Length: 275 mm Battery Type: 7.4V/11.1V LiPo (not included) Hop-Up: Adjustable Gearbox: Full metal with 8mm bearings Length: 900 mm Weight: Approx 3.5 kg Outer Barrel Material: Metal Receiver Material: Metal Handguard: M-LOK Front and Rear Iron Sights: Flip-up and adjustable G3 system

categories:Paintball and Airsoft

9161 impressions

794 views

Modeled after its real steel counterpart, the ProForce release of the SIG SAUER® MCX Virtus Airsoft AEG (Auto Electric Gun) Rifle does not disappoint. With a Full CNC machined receiver, integrated M-LOK™ handguard, 3-position telescoping stock, open full-length picatinny rail for the addition of sights, and a modular locking accessory mounting system. The MCX Virtus is an airsoft BB slinging brute with 120 round mid-cap magazine that keeps you active and engaged on the firing line. Features: Type: airsoft Power: Electric Material: metal & polymer Overall Length: 737 mm (29 in) Weight: 3 kg (7 lbs) Action: semi-automatic/full-automatic Barrel Length: 295 mm (11.6 in) Magazine Capacity: 120 rounds Ammo Type: airsoft BBs 6mm Muzzle Velocity: 420 FPS

categories:Sporting GoodsPaintball and Airsoft

7643 impressions

680 views

This is an original 1978 ESCI Sicily Operation Husky battle model, box is open, all pieces are present and still in sealed bag including British Paratroopers, British self propelled gun, German infantry, Italian tank, accessories, decals, 44x25 cm 17x 9 inches plastic battle field, has small crack on edge but once complete I’m sure you can cover it, this is the original set with original model pieces I have had it stored since 1978, south side pick up, no holds without e transfer and if posted it is available.

categories:Household ItemsCollectibles

1070 impressions

208 views

Original Lee-Enfield No.4 Mk I top guard set, purchased from Numrich Gun Parts (USA) back when they carried original surplus parts. No visible maker stamps; includes the metal muzzle cap as shown. Structurally sound and ready for restoration or use in a parts build. Sold as pictured. No trades. Will ship on buyer's dime.

categories:Sporting GoodsGuns

3759 impressions

221 views

Original wooden bottom stock guard / furniture for a Lee-Enfield No.4 Mk I. Purchased new-from-surplus via Numrich Gun Parts (USA), this is a genuine period-style part (not a modern reproduction), suitable for collectors restoring a No.4 Mk I or for someone looking to keep a build authentic. Stamped ‘F’ — likely Fazakerley ROF, appears to be beech. Please text or email for additional information/pictures. No Trades. Stock is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:Sporting GoodsGuns

4583 impressions

227 views

Classic single-shot Ruger No.1 in .45-70 Government. Excellent overall condition. Mechanically tight, clean bore, and a crisp, predictable falling-block action. Shoots very well: accurate from bench or standing, with a smooth, light trigger and rock-solid lockup that makes it a reliable choice for big-game hunting or precision single-shot range work. Stock and metal finish are well cared for with only minor handling marks consistent with careful use. Comes as pictured (no accessories included). Notes for buyers: Buyer must comply with all provincial/federal firearms transfer laws and present a valid firearms licence. Please text or email for additional information/pictures. No Trades. Rifle is located in North Battleford. I regularly travel between Calgary, Edmonton, Red Deer and Saskatoon and can meet at a mutually convenient midpoint. If any of those cities work for you I can arrange to meet there or somewhere in between along the route. Please suggest a location and time and I’ll do my best to accommodate.

categories:Sporting GoodsGuns

6722 impressions

430 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

11651 impressions

520 views

Howdy Townpost, I have a nice old Mossberg shotgun to sell. It's been nicely cleaned up the stock refinished and the action and metal Parts slicked oiled and cleaned up this would make a nice little bird gun or clay-buster. It comes with one magazine, works like a dream and is nice and clean. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71. Here's a video I made about this gun: https://youtu.be/o54GB2PDR5I?si=FTkrCxkECVBma-S4

categories:Sporting GoodsGuns

12146 impressions

456 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

6620 impressions

241 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

9892 impressions

640 views

Scope is Nikon Prostaff 3-9x40, a few dings from hunting as shown, 18 inch barrel, bore is excellent, no issues. Drop floor mag. Missing part of front sight. Clean and tested, functions as it should 100%. Please use cell phone text messaging. Courier Shipping, if needed, at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

12939 impressions

681 views

I am Federally licensed as a dealer, and looking to purchase an inventory of hunting style firearms and hunting accessories. Best prices paid in cash. NO Consignment. An "in person" inspection of condition is required. I do travel often for purchases over 5 firearms. Call or Text message to 403 556 0086 is the best way to contact me with pictures. email works to tim at vhmulcher dot com. Voice calls are appreciated and evenings are ok. I am retired so buy/ sell/ trade, collect, repair, keeps me entertained. Covid rules are followed and I have three shots. May consider in person "trade ins" but need to see them in person first. No exceptions unless new in box. PAL required upfront ahead of sending you pictures. Please see my firearms by clicking "TCVH" on this page. I am located in Reddeer County, Alberta. Calls or text messages to 403 556 0086 Shipping usually next day. Expect 25 to 35 $ additional. Payment by etransfer, cash, Canada Post transfer or their money order. NO COD As a "collector" of hunting firearms with several aspiring Grandchildren Hunters I keep some NOT advertised. "NEED A SPECIFIC HUNTING GUN ?" Send me your details and see if I can assist you with your search. 

categories:Sporting GoodsGuns

613908 impressions

30549 views