$170
Brand new MAGPUL 1913 Pictinny Rail Bipod-FDE $170Brand new
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value.
Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together.
An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps.
Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations.
The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.
The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.
Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping.
Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight.
At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.
Deploying and adjusting the Magpul Bipod is quick and easy.
Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.
The legs extend a full four inches, from 6.3” to 10.3”.
An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.
Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.
From the drawing board, the Magpul Bipod was designed to be barely noticed until needed.
Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide.
In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
The Magpul Bipod has many features that are also useful even when it is in the stowed position.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded.
Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch.
Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
Made in USA
categories:Sporting GoodsGuns
2329 impressions
332 views
Calgary, AB1 year ago
$180
Brand new MAGPUL M-LOK Bipod $180Brand new
The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value.
Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together.
An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps.
Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations.
The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.
The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.
Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping.
Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight.
At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.
Deploying and adjusting the Magpul Bipod is quick and easy.
Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.
The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.
Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.
From the drawing board, the Magpul Bipod was designed to be barely noticed until needed.
Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide.
In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
The Magpul Bipod has many features that are also useful even when it is in the stowed position.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded.
Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch.
Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
Made in USA
categories:Guns
3821 impressions
416 views
Calgary, AB1 year ago
$180
Brand new MAGPUL 1913 Pictinny Rail Bipod $180Brand new
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value.
Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together.
An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps.
Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations.
The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.
The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.
Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping.
Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight.
At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.
Deploying and adjusting the Magpul Bipod is quick and easy.
Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.
The legs extend a full four inches, from 6.3” to 10.3”.
An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.
Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.
From the drawing board, the Magpul Bipod was designed to be barely noticed until needed.
Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide.
In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
The Magpul Bipod has many features that are also useful even when it is in the stowed position.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded.
Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch.
Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
Made in USA
categories:Sporting GoodsGuns
2348 impressions
386 views
Calgary, AB1 year ago

$17000
Welding truckWelding rig for sale.
2005 ford f350 xlt
4x4
Long box
Crew cab 6L diesel
Egr deleted
Srw
Air tilt cruise pw pm pl
277km
Windshield cracked
Dash blanks out occasionally, probably just a loose wire
In decent shape.
3+3 red-d-arc
300 amp
kubota diesel welder
4600 hrs on welder
Runs great, starts great
No issues with welder
Skid comes with locking tool boxes
and basic tools, CAC gouger, grinders, vise grips, chain grips etc.
100' of heavy cable on each aluminum reel
10' of lighter cable on stinger and ground clamp
Pipe stands
Place for oxy acetylene bottles on skid
Positive air shutoff on truck and welder
Block heaters on both
Ready to go to work
$17000.
Lowball offers will be blocked
Add will be deleted once it sells
categories:Tools and Equipment
1667 impressions
338 views
Red Deer, AB1 year ago
???
Wanted Stock for Winchester DefenderHello!! I’m looking for a Stock for a Winchester Defender. The defender had a lighter colour stock & forend. I thought maybe someone had a pistol grip defender & doesn’t need the stock anymore!! Thanks for reading my ad!!
*the pic is just an example*
categories:Sporting GoodsGuns
3096 impressions
432 views
Leduc, AB1 year ago

$330
Shilen 6mm Rem Ackley barrel for a savage action
I'm selling my Shilen Select match barrel for a savage small shank action. The barrel is an S7 sendero contour, 26" 1:8 twist, 4 groove with a .274 no turn neck. The barrel has seen exactly 725 rounds through it with slow burning powders, every round is documented and recorded along with load data for each round fired. Lots of barrel life left,This was not a comp barrel, no prolonged strings of fire. It was a deer,coyote gun. Very accurate and liked multiple different bullets. Only reason for selling is I had a new barrel done in 6 Rem AI in an IBI carbon fiber barrel for a lighter weight rig.
The barrel new almost $700 plus shipping. It is an easy 1/2" MOA barrel. Asking $330 Firm
I also have 100 pieces of Lapua 30-06 brass that have been formed and neck turned with one firing for this barrel, better than any brass you can find for the 6mm Rem. These can be had for $80 additional.
Plum
categories:Sporting GoodsGuns
11626 impressions
846 views
Regina, SK1 year ago
Showing 21 of 63 records