This is an Atlasworx bottom metal for Tikka T3X, and it is made out of actual metal. It is a drop in replacement (two screws to undo) for the factory plastic. This set up takes the factory Tikka mags flawlessly. I had it mounted on my .308 but I'm changing set-ups again. $140.00 plus shipping, or pick it up in person in Red Deer.

categories:Sporting GoodsGuns

14966 impressions

546 views

Winchester Model 1895 30-40 Krag Ref #1047 This Winchester is a lever action, sporting rifle, round barrel, shotgun style rear stock. Dated 1903. Stock is in good shape, forend has a few chips missing next to metal, the rear stock is excellent, finish is period correct. Original metal recoil pad fits well. Barrel is 28” long with period sights intact. Bore is nice and clean with minimal to no corrosion, excellent rifling top to bottom. Bluing appears original and app. 20% throughout. There are very few minor scratches on metal. Screws are mostly unused, one does appear to have seen a screwdriver but is in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident. Ejector is intact and tight, and magazine follower is correct. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

16772 impressions

631 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

20451 impressions

683 views

Bought just before the pandemic and never used - ordered from Urban Barn Crowfoot location - paid 449.00 per stool - see store description below - only selling because I bought a kitchen table and now have no room for them - awesome high quality stools at a rock bottom price - 2 stools for 325.00 Industrial counter seating in a family-friendly package. The Emmory Counter Stool completes your in-house bar with close attention to detail. Slim metal legs keep your kitchen or dining area from looking cluttered, and metal side clasps provide added structure to the seat. Faux leather fabric makes this counter stool easy to clean, but its embossed texture means you don’t have to sacrifice style.

categories:Household ItemsFurniture

1022 impressions

460 views

This is a one of a kind Entryway Table. (Brand New) The top is made of peices of Maple which are designed in a Herringbone pattern that lead to the middle of the table. The middle of the table has a custom design of Maple, African Mahogany and Black Walnut. These three kinds of hard wood are also found on the ends on the slab. The “Grout lines” are filled with an epoxy resin with a metallic Copper colouring. The table base has been custom fabricated to fit under the slab. It is made from solid steel and finished black. There are four adjustable legs on the bottom for any uneven floors or to adjust to the perfect height. The base and top are assembled useing 4 bolts that are threaded into 4 threaded inserts in the bottom of the slab. 44” long x 15.5” deep x 30” high.

categories:Other

1103 impressions

302 views

Cleaning up the Unused, sliming everything down, Up today is my Brand new LH 6.5Creedmoor, I ended up going a different route so this rifle is just going to sit in the closet, It may as well go to a good home and bring home some medals. What is all included; Cadex R7 LH Barreled Action (26" x 1.24" Bull Stainless Criterion Match Stainless BBL) Machine work done by ATRS, McMillan A6 Chassis, Cadex Arca Rail, ATRS R700 Bottom Metal, x2 Magpul AICS PMags (x1 5rd / x1 10rd) (x2 Bergara AICS 10rd) Case, Manual, Spacer kit And a Modified case gauge fired from that rifle. Its currently Cerakoted in a Miami Vice style M81 Camo (Never Hide me Miami Flamingo). I can have it repainted black for no cost, Or something else for a small up charge. Everything cost me $5830 to build, Brand new. I am listing it for $3500 Or best offer. For those of you in Calgary, Its on Display\Consignment at Calgary Shooting Centre if you wanna put your hands on it. - no trades at this time. This is a NR Rifle, Bs Pal check must be done, Unwilling to provide a PAL or NO Pal will result in No sale, Deposits are NON-Refundable & Valid for 14 days. Shipping is on the Buyer.

categories:Sporting GoodsGuns

24627 impressions

1078 views

Ford Ranger tail gate, blue metallic, not bent, some rust on bottom.

categories:Auto and Trailers

516 impressions

112 views

Custom built RKS 1:7.5 LH gain twist heavy varmint barrel with blue chip precision brake mated to a Cadex Shepherd action with 4 lug bolt, DX2 Evo convertible double stage trigger, Atlas Worxs bottom metal, all aluminum pillar and glass bedded into a Nordic Wolf GRS stock. C/w Mounted Nikon scope (details in picture). Extremely accurate with only 1 box down the barrel.

categories:Sporting GoodsGuns

15291 impressions

1216 views

The box is indented stamped TYPE 315H on the bottom edge on the inside of the door. The inside of the door has complete wiring schematic. The back panel also is marked 315 H. Metal crank on the right outside side of the box. The CHROME bells ring when cranked, The box is in great shape. The front cover has a decal “THE NORTHERN ELECTRICAL MANUFACTURING CO LTD” . The decal is showing its age. It is readable & recognizable and is in great shape for its vintage. The volume is adjustable by moving bell arms closer or farther from the clapper's resting position. Magneto appears to be in great condition. There is no apparent mold or mildew on the cloth wiring, winding insulation or wooden cabinet, Gongs & Ringer. Measures approximately 9 x 7 x 6 1/2 inches. This set has not been tested and is SOLD “ AS IS ”

categories:Household ItemsCollectibles

4149 impressions

611 views

NO LAND, JUST THE BUILDING TO BE MOVED BY NEW OWNER. Building sits on 3 6x6 pressure treated skids 12’ x 16’ and 13’ in height (from the bottom of skids to the peak of roof at the highest point) 1 year old, used for 1 winter Currently being used as a reading room/ greenhouse/ hot tub building. With a ton of natural light, heat from the wood stove in the winter, and humidity from the tub, our house plants thrived, and it is an ideal location to start your garden seeds in advance of spring planting. There is enough room if you wanted to add a sauna, or it could easily be converted, with a lot of possibilities - Tiny Home, Cozy Small Cottage on an acreage or lake lot, Hunting cabin, She shed, work-out room, art studio, or a small guest, in-law, or income suite on your property. Construction: Everything has been glued and screwed 2”x4” exterior wall construction 3/8” OSB exterior walls with 1/2” plywood on interior Home wrap and 1” rigged foam insulation Fully insulated with r12 in walls and r28 pink insulation also, 1” rigged foam insulation in floor and r28 in roof Floor joist and roof trusses are 2” x 10” 7/16” OSB roof, ice and water shield, and 30 year shingles Exterior 8” shiplap Cedar siding and trim 36” metal door 2 large front windows ( both approximately 6’ tall, one is approx. 5’ wide, the other approximately 4’ wide) 2 (one on each side) crank windows (22’ x 34”) Interior walls and ceiling are 6” tongue and groove cedar and tiles on the floor and around the wood stove All reasonable offers considered Keith at 780-284-7224

categories:Yard and Garden

5833 impressions

801 views

Metal dog kennel with durable detachable bottom. Foldable. Like new. 18" wide and 21" high and 30 inch deep. Call 587-362-5415 to confirm and enquire. Pick-up in Cochrane. Cash only.

categories:Pets and Animals

1540 impressions

346 views

This is a custom rifle built by Pierce Engineering in Lansing, MI pleas see build specs below! Titanium Short Action with DLC finish Titanium Recoil Lug 6.5 Creed Match Grade Barrel- 1-8 , 6.5 20" Finish 22 Creed Match Grade Barrel 1-7.5 twist 22 caliber 20" Finish Both barrels have spiral flutes with a #3 contour Trigger Tech Special Frictionless Trigger Hawkins BDL Bottom Metal Kit AG Composite ALPINE HUNTER Carbon Stock Stock skim bedded Pierce Tactical Rail ( 0 moa) Spartan Bipod Adapter Rear Entry Action Wrench The bipod in the photo is not attached or part of rifle. There is a spartan adaptor imbedded in stock.

categories:Sporting Goods

5375 impressions

656 views

Fully Custom 700 in 7 mm Rem Mag Action Trued and Blue Printed by Ron Smith 24" heavy PALMA RKS Barrel Left Hand Gain ending in 8 ATRS Recoil Lug Bolt Sleeved, Fluted, with new firing pin and Bushed to be true Sako Extractor Swept back extended bolt handle with Badger Ordanance Bolt Knob Hawkins Bottom Metal Accurate Mag 3 shot Magazine Insite Arms Muzzle Break Bedded Grey Bull Stock (Green and Black web) ATRS 25 MOA rail Action and Rail Ceracoated Black Barrell is Bead Blasted Stainless 50 Norma Brass Included If local sale 2 pounds of H1000 can be included as well

categories:Sporting GoodsGuns

27141 impressions

2125 views

Next generation impact- and crush-resistant polymer construction • Paint-pen dot matrix panels allow identification marking • Self-lubricating follower increases reliability • Flared floorplate aids handling • Easy to disassemble for maintenance A larger-capacity version of the proven PMAG 5 7.62 AC. Magpul®’s PMAG 10-Round 7.62 AC Magazine uses next generation impact- and crush-resistant polymer construction to create this durable and extremely reliable polymer magazine for .308 Winchester-based family of cartridges. The self-lubricating follower increases reliability. Paint-pen dot matrix panels on the bottom of the body allow identification marking. Flared floorplate aids magazine handling and is super easy to disassemble for maintenance. Equipped with a long-lasting stainless steel spring. Compatible with short-action AICS-spec bottom metal and cartridges built on a 0.470" case head. Accepts cartridge lengths up to 2.86".

categories:Sporting GoodsGuns

8975 impressions

538 views

Tikka sa t3 stock $65 Tikka sa t3x stock with bottom metal $100 Tikka bolt handle $35 Tikka sa bottom metal $40 Tikka oversized bolt handle $60 Tikka 223 mag 6 round $80 All plus shipping

categories:Sporting GoodsGuns

11049 impressions

1064 views

Less than 50 rounds through it. Macmillan stock, bottom metal and drop box mag, MDT. Rifle was bought new and dropped off to Alberta tactical to have action worked, trigger done, bedded, ceracoated. Shoots amazing! Have a 300 PRC so don’t use this one. Can include scope for package price of $3800 firm or sell rifle separately 2600.

categories:Sporting GoodsGuns

26186 impressions

1870 views