Winchester 450 Marlin unfired 16 1/2 inch barrel ported pistol grip and side hammer3500.00 faster velocity than 45,70 unfired.

categories:Sporting GoodsGuns

78214 impressions

5183 views

Have grips for Ruger revolvers, Mark series 22, Detonics factory rosewood (New), Derringer (German I believe), Hogue mono grip for S&W I believe and N frame S&W. Also grips to fit CZ 75/85 pistols with shipping extra.RUGER WOOD GRIPS AND SELF FINISHING GRIP HAVE BEEN SOLD Colt 1911 have colt logo and wood.

categories:Sporting GoodsGuns

29196 impressions

1707 views

I have a Iver Johnsons Champion 16 gauge single shot for sale. Arms and Cycles works (Canada) LTD- Montreal Made in oobourg. (choke bore, Barrel and lug forged in one) 30 inch barrel. Gun is in good working order. locking release spring worn and has to be locked manually. Stock has very nice hand made wood burning on fore end and left side butt stock picture of elk. All hand made.  open to trades, Located in evansburg but make frequent trips to spruce grove .

categories:Sporting GoodsGuns

65820 impressions

3181 views

Mossberg 500 Persuader 410 Gauge 18.5” barrel with pistol grip New in box

categories:Sporting GoodsGuns

1626 impressions

141 views

Benelli Super Nova tactical 12 gauge 14” barrel length With Collapsible pistol grip stock Ghost ring sights New in the box

categories:Sporting GoodsGuns

9702 impressions

704 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:Sporting GoodsGuns

52737 impressions

2289 views

Here is a post war, black, leather flare gun holder that only does it hold the flare gun but also holds extra 37.5 mm flares. See pictures for condition. Also comes with a leather shoulder strap for easy carry. Can ship anywhere, please see my other ads for rare and collectable military items.

categories:Sporting Goods

408 impressions

50 views

Tired of Regular Snap Caps breaking your wallet and crapping out on you? I make brass snap cap rounds out of brass ammo for training or gun maintenance purposes. Please note that this is just a hobby so supply is sometimes limited to availability of clean brass. Please contact me if you have clean, resized, no primers brass available for sale at a reasonable price. Currently in limited quantities Pistol Rounds 5 for $10 plus $5 shipping anywhere in Canada 9mm Luger, 40 S&W Brass, 38 Special, 44 Mag .22 in brass (packs of 15) $10 Rifle Rounds 2 for $5 for $10 plus $5 shipping anywhere in Canada 303 British, 308, 8mm Mauser, 7.62x39 (steel case), 3006 , 8mm Rem Mag, 223/556 Shotgun Shells 2 for $5 (Shipping varies due to size/quantity and destination) 12g, 20ga 16ga and 410 Brass/Plastic (please indicate length required) 2 for $5 2 for $5 7mmx57, 6.5 Creedmoor, 45-70 Govt, 6.5x52 Carcano, 7.62x54, 20 gauge, 270 win, 357mag, 3030 Win, 444 Marlin, 35 Rem Brass not listed, if you have brass or shells that cycle through your guns I will make them for $1 each (you cover the shipping) primers removed. If you leave primers in, just make sure they have been fired and are not live. Can make (If you would like rounds made that I have not listed, I can do add those to my list) Text me at 7804464125 for faster response

categories:Sporting GoodsGuns

72618 impressions

2676 views

Brand new in package. Molded KYDEX construction with suede lining to protect handgun finish. 2 Adjustable belt plates included. Have one for 1911 Retail is in $130 range . Text is best way to contact .

categories:Sporting GoodsGuns

12867 impressions

1268 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

6740 impressions

251 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

5139 impressions

172 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

5235 impressions

147 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

5542 impressions

385 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:Sporting GoodsGuns

47307 impressions

1221 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

6614 impressions

241 views

Top is the Civilian version Cooey Model 82 single shot bolt-action .22 caliber target rifle intended for use in training Cadets,and junior shooting clubs (I learned how to shoot with one of these 60 years when I was in boy scouts). This one has no military marks. Comes with web sling. $500.00 Bottom Cooey Model 82 was a single shot bolt-action .22 caliber target rifle intended for use in training Canadian Army and RCAF cadets during WWII. This Military Cooey Model 82 trainer from WW2 was used for drilling purposes, target shooting, Home Guard and Cadet training.There is a Stock Number and C broad arrow on the bottom of the pistol grip and a crest on the top of the receiver. The bolt also has the C broad arrow. Nice walnut stock with minor marks on the stock as can be expected on a training rifle. This rifle does not have a peep sight and was used as a training rifle for the Lee En-field No 1's. Bluing is very good bore is excellent. Comes with web sling $550.00.

categories:Sporting GoodsGuns

6083 impressions

276 views

Browning Maxus II Rifled Deer 12 Gauge 3in Mossy Oak Bottomlands Semi Automatic Shotgun,22in thick wall, fully rifled barrel for use with slugs. Cantilever, Weaver style scope mount for easy optics attachment. Composite stock with close radius pistol grip and over molded gripping surfaces. Shim-adjustable for length of pull, cast and drop. Mossy Oak Bottomland camouflage. Ideal for big game hunting. Brand new.Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

4128 impressions

162 views

Heym SR30 High Performance Precision rifle Classic Premium In .300 Win Magnum Stainless steel. Description: This rifle has a straight pull/push bolt and a patented bolt locking system tested to 110,000 PSI, which adds to reliability and performance. Manufacturer: Heym/Germany. Caliber Info: .300 Win Mag Metal Condition: Excellent Wood Condition: Excellent Bore Condition: Excellent - bright Barrel: 26 Inch Stainless steel fluted (Krupp Steel, hammer forged barrel, made In-House at HEYM). Receiver:Stainless steel Magazine:Detachable Stainless steel Triggers: Has a fine set feature Stock: Deluxe Classic stock, hand checkering pistol grip, walnut grade 3/Dimensions:14 3/4" LOP Fore End: Deluxe checkered satin finished walnut with a rosewood forend tip Butt Pad: Heym soft rubber Weight: 3.1 kg. Sights:Optical Ramped blade front adjustable for elevation and a windage adjustable rear. Come with Detachable magazine, manual, sling swivels. Brand new in factory hard case. Renowned worldwide for their handling, accuracy and durability, each HEYM rifle made in Germany represents over 150-years of experience combined with the best in modern materials, machining capabilities and craftsmanship.If you choose one you are choosing the quality and performance that comes with this German designed and made “Porsche class” rifle. One of the best of the European straight pull sporting rifles however is the Heym SR30. Local is preferred, but will ship at buyers expense. Valid Pal a Must. Please send message to: medal1958@gmail.com https://www.youtube.com/watch?v=GhABWdIx8bk https://revivaler.com/heym-sr30-straight-pull-rifle/

categories:Sporting GoodsGuns

14647 impressions

1148 views

Winchester model 101 Diamond Grade Trap with 2 barrels set.30" O/U ported barrel with vent rib, top bbl fixed Mod/bottom barrel has screw in Winchoke. Single 34" barrel with high trap target ventilated rib and screw in Winchoke. Fully engraved nickel receiver, checkered walnut forearm, pistol grip adjustable comb stock, Gun locks up tight and has bright bores, wood still solid, with no cracks, some minor handling marks, as usual. All Barrels market " Winchester Diamond Garde" Trap -"East Alton.IL.USA".Gun still in a very good condition. M/F DG477XXX.Come with four chokes and case. Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

55027 impressions

5386 views

Winchester Model 21 Heavy Duck 12 Gauge 3 Inch Magnum. 30 inch double bore with bright shiny tubes. Modified and full fixed chokes. Single selective trigger, auto ejectors. Gun appears to be all original finish and blue with all matching serial #298XX's. The gun has original solid rib, metal bead front and middle sights, 3" Magnum chamber, pistol grip, beavertail forearm, high figure wood, auto safety, ejectors, single trigger with barrel selector. Recoil pad a bit dry. There are some handling marks on the stock and forearm. The checkering is really nice. The guns condition is just excellent for its age.Pal is a must. No trades. Thanks. Call or email only,as I don't use townpost messager. Please call me or text,before you send EMT!!!! Please send message,payment to: medal1958@gmail.com

categories:Sporting GoodsGuns

30087 impressions

2731 views

Italian made Tikka model 512S Combo 12 GA./308 Win. Caliber.20" barrels with sights,3 inch chamber, black engraved receiver, checkered pistol grip walnut stock, single select trigger and tang safety. Brand new, unfired. M/F Marocchi/Sako. Please call or text me before you send EMT!!!! Please send message,payment to: medal1958@gmail.com

categories:Sporting GoodsGuns

69864 impressions

6164 views