CYNERGY SPECIAL STEEL. 12ga-2 3/4-3”-3.5 chamber. 30”-Barrel Made in JAPAN.

categories:Sporting GoodsGuns

7832 impressions

864 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2515 impressions

363 views

Forgewood shafts are made from compressed Alaskan hemlock. Authentic Forgewood made in America: Alaskan Hemlock 1 inch compressed to 5/16 inch shafts. As you can understand, wood when compressed will be of variable weights and so these shafts will also. If you are very concerned about grain weights matching, then these may disappoint as they seldom do. The strongest wooden shafts /arrows made. This classic is stronger and more durable than fibreglass, graphite, aluminum or any other wooden arrow. This arrow will shoot through a 1 inch plank without a metal point! Add a broadhead and it will go through a steel drum, a moose or a bear. This compressed Alaskan hemlock is strong and sturdy. Forgewood arrows are the arrows you need for traditional hunting! If you prefer not to make your own, I’ll build them for you, complete and ready to shoot matched to your bow and draw length for only $300.00 a dozen. This includes natural feathers, field tips and a dozen bodkins (3 blades) or Hills Hornets (2 blades) your choice. Place your order early for next hunting season. Forgewood 5/16” arrows can be shot from compounds! We recently tested all kinds of arrow weights with various compound bows, and they shot just as well as the other types, but with heavier impact. 5/16“ shafts available for only $75.00 per dozen for pickup or you pay postage to mail to anywhere in Canada. These are the last Alaskan hemlock Forgewood shafts that will be made, and I have a limited supply. Available for bows 40 to 100 pounds and over; buy accordingly.

categories:Sporting GoodsBows

16237 impressions

1803 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3994 impressions

447 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2548 impressions

429 views

6.5 prc Winchester XPR with a mounted Zeiss Conquest v4 scope, 4-16X44 less than 100 shots Included: 3 boxes of ammo Carrying case Bipod Shoulder strap Scope: 4x zoom range • 90% light transmission • ZEISS T* coating is a guarantee of the brilliant, high-contrast images • Tested by exposure to rapid temperature shocks Rifle: Permacote FDE metal finish • Solid steel receiver • Free-floated barrel • M.O.A. Trigger system • 3 locking lugs • Short 60° bolt lift • 2-position thumb safety • Inflex Technology Recoil Pad The Winchester® XPR™ Hunter Bolt-Action Rifle combines proven concepts from Winchester's time-tested Model 70 with modern manufacturing processes and materials to produce a great hunting rifle at an affordable price. This XPR Hunter package comes with a composite stock, featuring full TrueTimber® Strata® camo, and a Permacote® FDE finished barrel and receiver. TrueTimber Strata is an excellent all-purpose camo pattern that blends into nearly any environment at any distance. An innovative Inflex Technology Recoil Pad absorbs recoil considerably. A factory-mounted and bore sighted Vortex Crossfire II 3-9x40mm scope, with a BDC reticle, allows you to obtain the rifle's true accuracy potential. Precision accuracy is ensured with a solid steel receiver that sits solidly in the polymer stock with a cross-mounted recoil lug, and a free-floated, target-crowned barrel. The XPR uses a newly designed M.O.A. Trigger system that's adjustable for both over-travel and pull weight. The bolt on the XPR has 3 locking lugs with a short 60-degree lift. The Winchester XPR Hunter bolt-action rifle has a 2-position thumb safety that locks the bolt when engaged. The bolt can also be cycled when the safety is engaged by using the bolt release button. A cocking indicator on the bolt shroud can be seen or felt by the user to know if the rifle is cocked and ready to fire. A detachable, single-stack magazine facilitates loading and unloading the rifle.

categories:Sporting GoodsGuns

13502 impressions

897 views

valid PAL required 8 boxes total.. each box complete with 25 shotshell 2 boxes 12 ga 3 inch 1 1/4 ounce BBB 6 boxes 12 ga 2 3/4 inch 1 ounce # 4 shot $ 40 per box $ 300 for all 8 boxes..... 200 shotshells

categories:Guns

3159 impressions

419 views

Like new very few rounds through the gun. Receiver - Steel ultra-low profile receiver with MonoLock Hinge, engraved with tough silver nitride finish Barrel 32” - 60/40 POI with a lightweight profile, ventilated side ribs and a floating top rib. Matte blued finish Action - Reverse Striker ignition system; using ultra-crisp and mechanical trigger design. Impact Ejectors for quick clearance of fired hulls, and a top-tang barrel selector/safety Stock - Charcoal gray composite stock with black rubber overmolding in grip areas. Adjustable comb for custom fit. A comfortable and extremely effective Inflex recoil pad. Vector Pro Lengthened Forcing Cones - For reduced shot deformation and more dense/consistent patterns. Choke System: Invector-Plus, includes 3x Midas Grade Chokes, Full Modified and Improved Cylinder Adjustable length of pull trigger 1/4" stock spacer to adjust the length of pull Ivory front and mid-bead sights Comes in original box…will ship on your dime. PAL confirmation required.

categories:Guns

8666 impressions

793 views

pre 1900 park bros double barrel 12 ga with case vulcan steel

categories:Guns

2915 impressions

379 views

Lantec Dragon Muzzle Brake Sig MPX ***$200 shipped*** NIB Also available Lantec MPX Break 9mm ***$200 shipped*** Manufactured to the highest quality standards and featuring a patent pending design, the LANTAC DGN762B™ Muzzle Brake offers improved recoil management and muzzle rise over competitors products. Its unique Short Energy Pulse system reduces length of recoil so that repeating shot energy cannot overlap and knock the shooter off target. Full auto fire is possible with massively reduced recoil and muzzle climb, meaning that all shots fall on target. SPECIFICATION: Caliber: 7.62X51mm / .308 Material: Hardened Milspec Steel Finish: Black Nitride QPQ Dimensions: L: 2.660'', DIA Body: 0.866'', DIA Fins: 0.900'' Weight: 2.8oz Thread: 5/8-24 UNEF R/H Serial Numbered for Quality Control Comes with appropriate crush washer.

categories:Sporting GoodsGuns

12259 impressions

693 views

Great condition. Never seen steel shot.

categories:Sporting GoodsGuns

9378 impressions

1033 views

Older Cooey 12ga single shot crack barrel shotgun for sale. Old enough im told it's only able to shoot older lead shots, not the newer steel ball shots. Minor rust inside the barrel, not sure if its repairable or not, could be a project gun. 46" long total length. Located in Edson, AB

categories:Sporting GoodsGuns

15558 impressions

1552 views

9 boxes of 20G steel shotgun shells. Package deal only. All are 3" steel. 1x #1 shot 4x #2 shot 1x #3 shot 3x #4 shot

categories:Sporting GoodsGuns

4876 impressions

521 views