One of the best hunting rifles ever made, IMHO. Scope included as shown is Bushnell lower end but does the job. 3-9x40 , no issues, new stock. 24 inch barrel. Clip mag.   No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

11107 impressions

898 views

Not often seen with all these collectible features, bore is decent, appears all original, all numbers match including floor plate, shipping will be expensive as it will have over length extra charge. Est 75$ most of Canada.   More photos available if serious.   A great Christmas Present .... Please use cell phone text messaging." Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:Sporting GoodsGuns

3646 impressions

187 views

Heym O/U shotgun, 16 gauge, 28-1/2” barrels Full/Full,2 3/4" chamber, blue finish with engraved steel frame,Kersten Double Crossbolt, Box Lock Over/Under with Automatic Ejectors and Side Cocking Indicators.Double triggers, deluxe checkered stocks.97% blue finish with some muzzle wear and a couple scratches on the right side of the barrels, bore clean and excellent, crisp action,fancy checkered wood stock with monte carlo cheek piece,grip cap,Heym butt pad and sling swivel. This gun is in overall in good condition. Pal is a must. No trades. Thanks. Call or email only,as I don't use townpost messager. Please call me or text,before you send EMT!!!! Please send message,payment to: medal1958@gmail.com Shipping on buyers dime.

categories:Guns

42007 impressions

3902 views

01.Browning BAR MKII 300 Win.mag 3 round mag.-$100.00 02.Browning BAR Belgium 300 Win.mag 3 round mag.-$80.00 03.Benelli Lupo 4rd Magazine Magnum Action .300 Win Mag-$80.00 04.Benelli R1 .300 WSM original mag.-$100.00 05.PMAG Magpul 308/7.62 NATO 5 rounds mag.-$40.00 06.XCR-M .308 win. 5-Round Pistol Mags-$40.00 07.AR15 5 Round 20 GA. Magazine-$40.00 08.Winchester 88 Caliber 243 WIN or 308 WIN 4 Round Magazine-$240.00 09.VZ58 7.62x39 5 round short magazine-$40.00 10.Browning X-Bolt Long Magnum Magazine 388 Win Mag, 300 Win Mag, 7mm Rem Mag.-$75.00 11.Ranger XT3 .410 Bore 5 Round Magazine-$65.00 12.Savage 220 2 rounds mag.-$40.00 13.Browning AB-3 300 Win.Mag. Black 3 RD-$80.00 14.Sauer 303 Factory Original .300 Win Mag 5 Round Magazine -$300.00 15.Sauer 200/202 Factory Original .270/30-06 5 Round Magazine -$300.00 16.Heym SR30 270/30-06 Factory Original 3 Round Magazine -$300.00 17.Colt/Sauer 90 FN Factory Original .300 Win Mag 3 Round Magazine -$300.00 18.VZ58 4 magazine leather pouch –$40.00 01.CZ 457, CZ 512, CZ 455 steel magazine .22 LR | 10 round-SOLD 02.Savage/Stevens/Lakefield 93/305/310/502/503 22WMR 5rounds mag-$40.00 each 2pcs. 03.Zastava CZ99/MP22/Rem model 5- 5 rounds .22WMR mag.-$45.00 each 7 pcs. 04.Ruger 10/22 Rotary Magazine - .22LR, 10-Round-SOLD 05.Savage A17 17 Hornady Magnum Rimfire (HMR), 25 Rounds,Butler Creek Magazine, Polymer Black-$45.00 each-3 pcs All are used except when specified as "New". They all work in the correct gun model. Some may need fitting. All prices NOT INCLUDED SHIPPING cost! Shipping extra!

categories:Sporting GoodsGuns

262705 impressions

13147 views

Plano 1532 Pro-Max PillarLock Double Gun Case. The Plano Model 1532 Pro-Max PillarLock Double Gun Case is a large hardshell carrier for two rifles, and is capable of accommodating riflescopes with large objective lenses. The hardshell design is built to last, with thickened walls and patented PillarLock construction for additional crush resistance. Internal foam padding protects the contents from impacts, while tough tie-down straps prevent them from moving around during transport. The molded-in handle makes the case easy to carry, and it is both lockable and airline approved for security and convenience. The case fastens using six heavy-duty latches, keeping the lid securely closed. All Features: Padlock tabs Colour: black Weight: 7520g PillarLock technology Four tie-down webbing straps External dimensions:136.8cm (L) x 48.6cm (W) x 14.3cm (H) (approx) Interior Dimensions: 132cm (L) x 43cm (W) x 10cm (H) (approx) Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:Guns

7015 impressions

560 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

12389 impressions

436 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

10528 impressions

273 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

10828 impressions

235 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19873 impressions

731 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

12304 impressions

374 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

16011 impressions

958 views

Red Dot mount for Win 94 lever gun. This is the cleanest and easiest way to add a red dot to your rifle. If you have the AE version use two bolts to secure via the front scope mount holes. If not, any competent gunsmith can drill/ tap two  holes easily.  fits RMR footprint,  (2) available,  $100 shipped.  *please see my other ads*  

categories:Sporting GoodsGuns

8000 impressions

201 views

Description The Sako 85 Finnlight rifle is for those who foray deep into the wild to reach their goal. Hunters on mountain trails or on long-distance treks prefer high-performance rifles that are full-sized, yet still lightweight. The fluted barrel of the Finnlight is just one of the many features that make it ideal for the hunter seeking a perfectly trimmed light rifle. The Sako 85 Finnlight is also an excellent choice for women and younger shooters. SPECIAL FEATURES BARREL The specially engineered fluted barrel of the Sako 85 Finnlight reduces rifle weight and also accelerates the barrel cooling. STOCK Sako 85 Finnlight has a reinforced black polymer stock with a soft grey pattern on its grip surfaces and a Soft Touch surface treatment. ACTION Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing. BARREL Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish. MAGAZINE The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release. SAFETY The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged. SIGHTS Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage. STOCK The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation. TRIGGER The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. *NO HOLDS **Accepted method via Email transfer & cash *** gently USED hunting firearm from my safe. I've used this firearm on a number of hunts in the last two years. It is a well maintained firearm that equipped Sako opilok rings and a Vortex Viper 3-9x40 scope plus a Sako sling. I can deliver to Saskatoon area ONLY

categories:Sporting GoodsGuns

10657 impressions

327 views

GENTLY USED FIREARM in excellent condition. Maybe 20 Rounds or so fired. Kept in a safe and cleaned after each use. Henry Classic Lever Action .22 Magnum Model Number H001M Action Type Lever Action Caliber .22 WMR Capacity 11 Rounds M.S.R. Price $609.00 usd plus taxes Additional Specifications Barrel Length 19.25" Barrel Type Round Blued Steel Rate of Twist 1:16 Overall Length 37.5" Weight 5.50 lbs. Receiver Finish Black Rear Sight Fully Adj. Semi-Buckhorn Front Sight Hooded Blade Scopeability 3/8" Grooved Receiver Scope Mount Type Ringmounts for 3/8" Groove Stock Material American Walnut Length of Pull 14" Safety 1/4 Cock Best Uses Target/Hunting/Small Game ***I paid over a $1000.00 cad.*** PRICE: $900.00 or best offer PREFERED: via cash or email transfer SHIPPING & DELIVERY EXTRA *** delivery is only available for Saskatoon area ABSOLUTELY NO HOLDS PLEASE ONLY SERIOUS BUYERS TO PURCHASE: A VALID PAL IS REQUIRED NOTE picture is similar to the rifle I am selling ***NOT MY PICTURE

categories:Sporting GoodsGuns

8707 impressions

478 views

COMES WITH ORANGE TIP Features Fully Licensed esk Zbrojovka Trademarks Polymer construction Textured polymer grip panels Rear slide serrations Fixed low-profile sights Realistic shell ejecting 8 round magazine Realistic Blowback Action Manufacturer: Marushin / ASG (Licensed by Česká Zbrojovka) FPS Range: 310-325 Specifications: Dimensions: 203mm x 135mm Magazine: 8rds per Magazine Gas Type: Green Gas OK. 134a recommended Firing Mode: Semi Automatic, Safety System: Gas Blowback Hopup: Yes, Non-Adjustable Package Includes: Gun, Magazine *GBB 101: It is a good idea to let your magazine return to regular temperature before using it again for optimized performance. We recommend spare magazines for best performance on all GBB's. Pick up in NE community of temple Will ship at buyers expense

categories:Sporting GoodsPaintball and Airsoft

4267 impressions

352 views

Please text anytime 6476871484. Brand new $100-110 12GA to 22 LR or 22 Short Adapter - SMOOTH BORE OR RIFLED!!! Precision machined from stainless steel Made in USA. This adapter has a SMOOTH Bore (rifled) This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22lr bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22LR or 22 Short ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A SMOOTH bore is reamed through the adapter for the bullet. Adapter orientation is not important and the adapter will work in any position. Will fit any break open gun with 2 3/4" or 3" chambers. Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 22LR / 22 Short bullets. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open shotguns. This chamber / caliber reducer will not work with 22 magnum ammunition. Any ammunition pictured is for representation purposes and is not included with this purchase.

categories:Sporting GoodsGuns

38728 impressions

3075 views

Please text anytime 6476871484. Brand new 12GA to 22 MAGNUM Shotgun Adapter Designed for break-open shotguns Precision machined from stainless steel made in the USA This adapter has a SMOOTH BORE This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22Magnum bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22 Magnum ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A smooth bore is gently reamed through the adapter for the bullet (no rifling). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 22 Magnum bullets Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style shotguns. This chamber / caliber reducer will NOT work with 22LR/22 long/22 short ammunition.

categories:Sporting GoodsGuns

28563 impressions

2305 views

Please text anytime 6476871484. Brand new in original box. Special addition extra durable version. All hardened steel construction. Rifled barrel. Very light single action trigger. Excellent fit and finish. Low cost to shoot using standard .177 lead pellets BBs and #11 or #10 percussion caps. Legal in Canada without a PAL Firearms License. Smallest pellet pistol I know of! It is a reproduction of the extremely rare Remington Rider Single Shot Derringer pistol of which only about 200 were produced 1860–1863. Small pistols suitable for indoor practice were called parlor pistols. The pistol is of steel construction, available with polished white or case hardened finish. Like the original, the pistol fires a .17″ (4.5mm) ball or pellet using only a percussion cap and no powder charge needed but can be added for different power levels. To fire it, shooters place a ball into the breech plug small tube (which is capped) inserted against the barrel. The hammer fires a # 11 or 10 cap, which expels the ball. Caliber 4,5 mm Twist 450 mm (1:18″) Barrel’s length 52 mm Overall length 120 mm Weight 0,155 kg

categories:Sporting GoodsGuns

64314 impressions

6100 views

Please text anytime 6476871484. Fully functional no PAL required. This one is in perfect condition, action is strong and locking mechanism works great with no any barrel play at all. It can be used with original 4gauge flares and also with 12gauge universal adapter for regular flares and bangers as well as with many other adapters from 12ga to many different calibers from .22cal to 9mm to 44mag blanks too. Military 26.5mm Flare Gun. Dated 1954 & compatible with a 12 gauge universal FLARES insert. Very durable all steel construction. Many adapters available but sold separately for $110 each.

categories:Sporting GoodsGuns

27251 impressions

2478 views

Please text anytime 6476871484. Fully functional no PAL required . These flare guns can be used with 12 gauge adapters  for 12 gauge flares and bangers. They are most durable flare guns heavier and/or larger then modern plastic/metal ones. 26.5mm to 12 gauge universal flare gun adapters available for $100 each. 12 gauge flares available for $5 each. Here is the list of Flare guns currently in stock:  Bosnia military AC Unity BIH (aka H&K P2A1 Clone) NEW $520  Bulgarian military 26.5mm Flare Gun $490  Polish 26.5mm Flare Gun, (Factory 11) $500 European military flare gun. $450 Comet 12 gauge special addition flare gun. (plastic) New. $100 All addons pictured not included and sold separately.

categories:Sporting GoodsGuns

25163 impressions

2328 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Remington-Smoot New Model No. 4, .38 Rim Fire Pocket Revolver. The design of the "New Model" Line of Remington revolvers is based on a patent issued to William S. Smoot in 1873. The four types, No. 1 through 4, are all similar in their use of a two-part frame which is joined just above the grip. This one is the No. 4, which resembles the popular "Bulldogs" of the day. It is in excellent condition with original nickel . The action is strong and accurate, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2 inch barrel is excellent and bright, with sharp rifling. The black hard-rubber grips are very fine and undamaged. SN 21108, excellent overall.​​ History & Background Like Colt, Remington had to get into the cartridge pocket revolver market by sheer public pressure. They, too, like Colt, experienced difficulties trying to compete with the cheap "suicide specials" which were available at that same time. Although sales were brisk at first, and the guns enjoyed great popularity due to their excellent quality, in the long run the public opted for cheap over quality, and by the mid 1880's production of the smaller models was halted. The Smoot patent refers to the spring-loaded cylinder pin / extractor found on the New Model No. 1, 2 and 3. Remington was well known to acquire the patents of other designers and incorporating them into their own line of products, and into the name of the models. Inventors such as Beals, Elliot, Rider and Smoot all contributed to the success of Remington handguns.

categories:Sporting GoodsGuns

28671 impressions

2480 views