Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2330 impressions

332 views

Selling a roll of pet rated artifical turf. It was purchased for a large dog run but the dog died. Includes a pallet of sand required for proper installation. Is on a trailer and can be delivered. Pictures aren't loading it seems, but I can text them to interested folks.

categories:Yard and Garden

698 impressions

175 views

6 month old goldendoodle fully vaccinated. I have all of his records. He weighs around 20 pounds and. He’s hypo allergic, does not shed at all which is a very good. Sadly we have to rehome him due to him not getting the proper care he needs. We barely have time for him and we feel bad as we want him to be able to live the best quality of life he deserves, and go on adventures (he loves being outside) and not just sit in his crate. He’s a great family dog he’s good with kids as we have kids of our own at home. He’s microchipped, has all vaccines, knows a few tricks such as high five, sit, down, roll over, stay, and wait. We want someone who will have time for him and take him on adventures. Puppy care package: His toys, one big bag of puppy dog food, leash, harness, bed. DM ME SERIOUS INQUIRIES ONLY! 200$ deposit

categories:Pets and Animals

937 impressions

162 views

**Gift certificates for your loved ones can also be issued. They can use it till next year. FOR GETTING CLASS 4, 5 & 7 DRIVING LICENSE TRAINING / CAR RENTAL FOR I.C.B.C ROAD TEST Do you want quality car driving training with an experienced instructor saving you from your frustration, time & money? PLEASE NOTE-QUALITY OF TEACHING MATTERS with experience **LADY INSTRUCTOR ALSO AVAILABLE** LICENSED EXPERIENCED, PATIENT, KNOWLEDGEABLE, FLEXIBLE, CARING & PROFESSIONAL GRADUATED LICENSED PROGRAM INSTRUCTORS WHOSE MAIN AIM IS TO MAKE SAFE DRIVERS IN B.C. * I.C.B.C. Licensed, Bonded and Insured Driving School working in many cities in lower mainland CARS FOR ROAD TEST ARE AVAILABLE AT VERY LOW PRICES ON ALL LOCATIONS Excellent service 99% of customers are happy with our services. (5/5) OUR OFFERS ONLY FOR CRAIGSLIST USER'S- **** (Pl give reference of craigslist to get these prices) Limited time offer in Surrey**(PICK UP KING GEORGE SKYTRAIN STATION OR OUR SPECIFIED LOCATION) Only for new qualifying students registering. Subject to availability conditions apply- ***LOWEST PRICES Ever- 1.5hour lesson -$76 2hour lessons-$ 95 ***10 hours package $ 480 ***(this package is offered if pick up from our designated location is there) ***conditions apply ***10 hours +car rental for test -$580 (each time 2hour lesson will be given) ***Road test package --$150 for 45 min. warm up+ car rental for test ****** INDIVIDUAL LESSON & PACKAGE PRICING MAY VARY BASED ON LOCATIONS. Mock test available--Assessment of your driving before road test. PATIENT and EXPERIENCED driving instructor helps get you on the road! ****** INDIVIDUAL LESSON & PACKAGE PRICING MAY VARY BASED ON LOCATIONS. Call or Text-------778-834-5898 (cell) / 778-785-0082 (call only) VISIT OUR WEBSITE-- fastracksuccessdriving.ca on all locations For our regular pricing & testimonials *Training for your class 4, 5 / 7 license *One on One training * Lessons available 7 Days a week * Schedules can be arranged to suit your needs. * Day, evening or weekend courses * Excellent Passing Rates **brush up courses **practice given around test areas Our Services are in ALL CITIES--- Surrey / Delta / Langley / Clover dale / New Westminster / Burnaby / Vancouver / North Vancouver / Point Grey / Port Co Quit-lam / Coquitlam etc. WE PROVIDE CARS FOR ROAD TEST ON EVERY LOCATION TEACHING AT*****A FASTRACK SUCCESS DRIVING SCHOOL***** Steering control, Braking, straight driving, road signs recognition, , Dashboard operations Signals, mirror, shoulder, blind spots check, communications , in city driving (Cul-d--sacs , two way & four way stops, roundabouts) , Intersections scanning, standing and rolling right and left turns, entering traffic, pulling over and stopping on side of the road, changing lanes, parking on a hill, starting on a hill, driving on hills and curves , parallel parking, reverse stall parking, straight reverse, two & three -point turns, free & High ways--entrances and exits etc..---- *****We specialize in teaching parallel parking & reverse stall parking in easier and simpler way. *****Able to fix bad driving habits, detects the cause of a habit and finds solutions to solve it *****Practical assessment before the road test will be there. The instructor will assess the areas which need maximum to be worked on by you. *****We guarantee to give you tips to help pass the road test. Customer satisfaction is our top priority! Many driving schools will merely teach you the signs, rules of the road and how to obtain your driver's licence. But here at A Fast rack Success Driving School we go an extra further by making you total confident by teaching you essential vital safe defensive driving techniques and valuable skills that will last you a lifetime because that is our commitment. CONTACT FOR --A FAST RACK SUCCESS DRIVING INC. ---- FOR QUICK RESPONSE- --778-834-5898 (CELL) (CALL OR TEXT) / 778-785-0082 (call only) --Visit our website-fastracksuccessdriving.ca for more details about regular prices and Testimonials. AWARDS & RECOGNITIONS-- HURRAY! AGAIN, GOOD NEWS CONTINOUSLY 6TH TIME FOR PROVIDING CONSISTENT HIGH-QUALITY BEST SERVICES TO CUSTOMERS (2023) --- WHICH PROVES US DIFFERENT AND BETTER FROM OTHERS— 1--A big honour 7th consecutive years( 2018-2024) given to us by adjudging our school among the best three driving schools in Surrey by-- ----------https://threebestrated.ca/driving-schools-in-surrey- A Fastrack Success Driving School has been adjudged among the three Best Driving Schools in Surrey for seven consecutive years (2018, 2019, 2020, 2021, 2022, 2023 and 2024) by threebestrated.ca by using their rigorous 50-point inspection which includes everything from checking reputation, history, complaints, ratings, nearness, satisfaction, trust, cost and general excellence. 2-a-Canadiandrivinglessons.com Adjudged "A Fastrack Success Driving School" one of the MOST POPULAR #4 Most Popular Driving Lessons Providing School in Greater Vancouver and #8 Most Popular Driving Lessons Providing School in British Columbia in 2019. b-Canadiandrivinglessons.com Adjudged "A Fastrack Success Driving School" one of the MOST POPULAR #3 Driving Lessons Providing School in Surrey, # 5 Most Popular Driving Lessons Providing School in Greater Vancouver and #8 Most Popular Driving Lessons Providing School in British Columbia in 2020. c-Canadiandrivinglessons.com Adjudged "A Fastrack Success Driving School" one of the MOST POPULAR #4 Driving Lessons Providing School in Surrey, # 7 Most Popular Driving Lessons Providing School in Greater Vancouver and #9 Most Popular Driving Lessons Providing School in British Columbia in 2021. d-Canadiandrivinglessons.com Adjudged "A Fastrack Success Driving School" one of the MOST POPULAR #4 Driving Lessons Providing School in Surrey, # 8 Most Popular Driving Lessons Providing School in Greater Vancouver and #11 Most Popular Driving Lessons Providing School in British Columbia in 2022. e-Canadiandrivinglessons.com Adjudged "A Fastrack Success Driving School" one of the MOST POPULAR #4 Driving Lessons Providing School in Surrey, # 7 Most Popular Driving Lessons Providing School in Greater Vancouver and #10 Most Popular Driving Lessons Providing School in British Columbia in 2023. 3--A Fastrack Success Driving School is listed #2 out of 314 driving instructors in Surrey by "starofservice.ca" to "Hire the Best Driving Instructors in Surrey"

categories:Business and ServicesSkilled Trades

1748 impressions

760 views

**URGENT: Family Desperately Seeking Acreage to Rent by End of Month** Hello kind community, We are reaching out today with heavy hearts and an urgent plea for help. Due to unforeseen circumstances, the acreage we were supposed to move to has fallen through, leaving us in a dire situation. We now have until the end of the month to find a new home, and we are truly desperate. We are a family of four and a host of beloved animals, including our livestock and dogs. Our animals are not just pets; they are an integral part of our lives and losing them would be heartbreaking. We are searching for an acreage to rent in Sturgeon County or Parkland County, but at this moment we are open to any location that can accommodate us. We understand that finding such a property on short notice is a challenge, and we are more than willing to put in the effort to make it work. Whether the property needs maintenance, repairs, or even extensive work, we are prepared to roll up our sleeves and get to it. Our family is committed to taking care of the land and making it our home. If you or anyone you know has an acreage available or knows of someone who does, we beg you to reach out to us. Time is running out, and we are in desperate need of a miracle. Please help us keep our family and animals together by providing a lead or an opportunity. Thank you for taking the time to read our plea. Any assistance or advice you can offer would mean the world to us. With deepest gratitude and hope, Bill and Cassie

categories:Real Estate and Rentals

2006 impressions

370 views

Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

3821 impressions

416 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2349 impressions

386 views

This full-size steamer is powerful with steady steam to softens & straightens wrinkles on fabrics. The LONG LASTING removable about 2Liter water tank provides over 60 minutes of continuous steam. Also work great to kill dust mites and bed bugs. Very safe on silk and other delegate fabrics. Please call 780-909-8231 or text for more details. Asking $50 obo

categories:Sporting Goods

687 impressions

108 views

Used SpaceKap Wild. Comes with rolling deck, heater, ladder racks, multiple tool boxes, vice and inverter.

categories:Auto and TrailersAuto Parts

1593 impressions

261 views

CALGARY, DOWNTOWN CORE -- $250 Selling a full set of Winter Tires that are mounted on rims, these were only used for one season. These are General Altimax Arctic P195/65 R15 91Q. These will are 15" tires, which are also studdable however, I never added studs to them. ~~Selling for $250, located DT Core of Calgary, PICK UP & CASH ONLY!!! If the ad is up, then tires are still available. *This ad is cross-posted. Snow Peak Rated -- The 3 Peak Mountain Snowflake symbol indicates the tire is rated for Severe Snow Service. Mud & Snow Rated -- The M+S symbol differentiates an All-Season tire from a Summer only tire. While rated for light snow, they will not match a winter tire for traction or stopping distance on snow and ice. Rated Low Resistance -- Indicates the tire has had additional testing to ensure that it meets a certain benchmark in Rolling Resistance to help improve fuel economy. Size -- 195/65R15 91Q Load Index; Single -- 91 Speed Rating -- Q Max. Inflation Pressure -- 44psi Tire Width -- 195mm Wheel Diameter -- 15in. Aspect Ratio Percent -- 65 Bolt Pattern -- 5x100 (Came off of a 2009 Chrysler PT Cruiser -- Base Model)

categories:Auto and TrailersAuto PartsTires and Rims

15630 impressions

1735 views

Phaff Creative 4850 - Cover Style Serger & Coverstitch Sewing Machine High-end Serger and Coverstitch sewing machine in excellent working condition with 2/3/4 & 5 stitch options. Orginal purchase price-$1,100.00 The Coverstyle 4850 is the perfect choice for sewing enthusiasts who want to give their work a professional finish. Perfect hem edges, trimming cut-outs or attaching elastic. It can do this all in one operation. With clear and simple thread tension instructions on the stitch panel, colour coded threading paths and special threading levers this Pfaff coverstyle 4850 is a dream to use. It has two needles, five threads and 18 stitch programs to give you the freedom to make all of your ideas a reality. Absolutely even seams: Differential feed prevents seams from stretching or puckering. The differential feed can be individually adjusted as needed. True industrial seams: The 5-thread overlock stitch and the double chain stitch for heavy-duty seams. The stitch length can be fine tuned in small increments. Adjustable stitch width and stitch length: The 5mm cover stitch can hem and serge all in one operation. Use it for sweatshirt hems, sewing on elastic. Fantastic results can also be achieved with the cover stitch. No need to change the presser foot or needle plate when sewing rolled hems. No stretching of the seams, no puckering of fine fabrics, thanks to the differential feed. Even knitted fabrics will remain perfectly flat. However, if you reverse the differential feed setting, you can create amazing wave like effects. Use the converter to work with 2 threads. Create the beautiful 2 thread flatlock seam for decorative effects. "Slow sewing" for complex sewing jobs, "quick sewing" for rapid work - two sewing speeds can be set with the foot control. Regardless of whether you are sewing light or heavy fabrics, whether you are sewing quickly or slowly, the needle piercing power is controlled electronically. High presser foot clearance for working with several layers or heavy fabrics Perfectly even seams - The differential feed prevents the seam from being stretched or puckered. Even knitwear remains flat. Wave like effect can be achieved by reversing differential feed. Wonderfully practical - the thread chain cutter. No more long searches for scissors. Machine comes with power supply & accesories shown as well as an extra/spare coverstitch plate and owner manual on flash drive Will ship via insured shipping anywhere in Canada but buyer pays shipping fees

categories:Household Items

1086 impressions

267 views

Located in Fort Mcmurray. Could possibly deliver depending on location....................................... Item prices below IF YOU TAKE IT ALL- 6k (over 15k in items if added up true value prices of items) 1. Two new prolock chain hoists- 1 new in box and the other used once. Over $300 each, $400 takes both 2. Milwaukee Vacuum, Does not come with battery or charger. Used a handful of times $100 3. DELL Latitude 14 rugged Extreme 7414 Laptop. Recently formatted and ready for use. $300 4. Direct Weld Square Trailer Jack (12,000 lbs) 12.5” travel $200 ($500 new) 5. New John Deere Hydraulic Cylinder for Skidsteer (56x32-444.5) $500 (over $1000 new) 6. New Zerostart Vibra Dump Truck Body Vibrator $500 (over $1000 new) 7. Brand new Quaker city Grinding hand mill $200 8. New King size weighted blanket $180 9. 7ft Skinny bar and 100lbs of weights $100 10. Engine blockheater $60 11. Zerostart engine/tank/various electric inline heater $160 12. New 3600 watt 240V Mr Heater $120 13. LG double wide computer monitor. Comes with wall mount $200 firm 14. Spare skidsteer tire sks 532 14-17.5 NHS 15. New Enthuze blackout series sidebar/steps for 2019-2024 rams $300 16. Four used 3 ton come alongs. $300 for all four 17. A/C Manifold and hoses $160 18. 2 rotors that fit 2013-202 f250 ¾ ton, 2013-2016 f450 super duty, 2013-2020 f350 super duty $200 19. 2 rear rotors for 18,19,20,21 Ford expedition & 18,19,20 f150 $260 20. New Fill Rite Fuel meter $260 21. 6 New LED work/offroad lights $140 for all 22. TRUX LED headlight & Brights set. Was for a Ford but traded truck. $280 for the set 23. CAT 160m3 Circle wearpad/shim kit. SN# N9K over 4k new 3k takes it 24. New in box 2 rear ford rotors for F250-2013-2022 and 2013-2022 $300 25. New John Deere Air Intake Tube over $1000 new, $500 takes it (fits 350D-350DII-350DW-400D-400DII) 26. New John Deere loader frame wiring harness. Over $1300 new, $800 takes it. (fits 444j-544j-624j-644j-724j) 27. 09-12 Dodge ram 1500 RH headlight assembly. $160 28. John Deere 1000hr service kit, was for a 332G but fits 330,331,332,333 skidsteers. $300 29. New John Deere starter, over $600 new, $400 takes it. List of compatible equipment in this link https://shop.deere.com/us/product/SE501406%3A-REMAN-Starter-Motor/p/SE501406 30. RS80 RIV Roller Chain- Standard Series, 80 / 1 in Pitch, Riveted, Carbon Steel Material, 10 ft Length. $600 new, $300 takes it. 31. 2 New Ford FA-1950 air filters $70 new $40 each takes them.Fits fords f250-f600 years 2020-2023 32. New Ford FD-4625-aa Fuel Filter kit $100 33. 2 new Ford BRAB-588 Wheel abs sensor. $100 each 34. 2 new 50ft ½” flexilla air hoses (one is just dirty and out of the package)3. $50 each 35. New Hub assembly for Ram 4500-5500. $280 Compatibility in link https://www.napaonline.com/en/p/BRGBR930508 36. Ten Dewalt 16 x 5/32 x 1 cutoff wheels $15 each 37. 1 Gold 12”x1/8x20mm cutoff wheel $5 38. 3 14x1/8x1 Makita cutoff wheel $5 each 39. 3 16”x7/64x1” cutoff wheels $5 each 40. Five 6’ LED all purpose buggy whip $100 each 41. Two new Komatsu Alternators $400 each fits HM350, HM400, S6D140E, SA6D140, SA6D140E, SAA6D140E, SDA6D140E, WA500. Replaces 600-825-7111 42. 4 Cab air filters for JD and Hitachi excavators ($25 each) fits 75G-85G-245GLG-135G- ZX85USB-5- ZX75US-5- ZX245USLC-6- ZX135US-6 43. 3 Cab Air filters ($40 each) fits EXCAVATORS: 75C, 75D, 75G, 80C, 85D, 85G, 110, 120, 135C, 135D, 135G, 160LC, 200 CLC, 200LC, 210CW, 225 CLC RTS, 225 DLC, 230 CLC, 230LC, 230 LCR, 230L CRD, 245 GLC, 270 CLC, 270LC, 330 CLC, 330LC, 330 LCR, 330 LCR, 370, 370C, 450LC, 550LC, 750, 2054, 2154D, 2454D, 2554, 2954D, 3554, 3754D 44. New JD shift selector Switch AT176801 For John Deere 444H 544G 544J 524K LX230-5 WL56 $300 45. 3 new rolls 1.5” x 50’ and 1 roll 1.5”x100’ Extreme 400 Fire Hose NFPA threaded ends $100 each 46. . New Deutz turbo charger Turbocharger 04299152 for Deutz Engine TCD2013L042V Replace Part Number: 0429 9152, 04299152, 4299152, 0450 5491, 04505491, 4505491, 04299152KZ, 4299152KZ Applications: Fit For Deutz Engine:TCD2013L042V, TCD2013L04 2V 47. 12 new J350 twin tiger teeth- $600 for all

categories:Tools and Equipment

10686 impressions

1076 views

540 PTO, 7' wide pickup, steel on steel conditioning rolls Asking $9,000 obo

categories:Tools and EquipmentFarm Equipment

3767 impressions

381 views

Mossberg 500 Rolling Thunder 12 ga. Less than a box of shells put through it and practically perfect condition, just taking up space. Valid PAL required.

categories:Sporting GoodsGuns

7168 impressions

868 views

Our Puppies are ready for THEIR next adventure! Mom (Penelope) is a Masked Lilac Fawn and Dad (Shazam) is a New Shade Isabella Tan All our puppies are hand-raised and underfoot in our LARGE family! Our Puppies whelp in our living room surrounded by noise and visitors from day one to ensure they have the best imprinting and socialization when they leave to find their new home. We know our pups and ask the questions to ensure that a Frenchie is the best breed for you. Please read the personality of each pup, and ask about the one that you think would be best for your family. Kia (MALE, GREEN COLLAR, Red Lilac Fawn, $2500) - This little man tugs all the strings! His facial expressions are one, SMILE. Kia is always smiling. He loves to love and will expect this in return. Snuggles (MALE, BABY BLUE COLLAR, Lilac Fawn, $2000) - This guy is the largest of the litter and has rolls for days. He has two speeds, trying to run or sleeping. He loves his toys and would be just as happy in your lap. Charlie (MALE, ORANGE COLLAR, Red Lilac Fawn, $2500) - He is the smallest male and the sweetest, when there is action in the room he will be the one sitting and waiting his turn. He has a very quiet personality and loves to give out kisses. Dude ( MLAE, ROYAL BLUE COLLAR, Red Lilac Fawn $2500) - This guy is funny, he has a slight underbite that I think adds to his "old man" personality. He loves to be on your lap and loves his furry friends cats and dogs alike. Ridge - (FEMALE, RED COLLAR, RED SABLE Tan, $2500) - Ridge holds her own, loves belly rubs and explores her surroundings, she is the first one to stray and investigate the unknown. Pancake (FEMAL, PINK COLLAR, LILAC FAWN, $2500) - Pancake is round and rowdy and loves to steal rolled-up socks and run! She will also sit quietly and wait her turn. All pups in this litter we only be sold on PET CONTRACTS! All PUPS will come with: * Vaccinations, Dewormed and Microchipped * Vet Checked with Health certificate, 6-week pet insurance * Large Pup Pack (Bed, Collar and Lead,1 Month Supply of Dog Food, Treats, Toys, Litter Blanket) * Support as needed

categories:Pets and AnimalsDogs

3671 impressions

749 views

I am selling my original .43 Spanish Rolling Block Remington Rifle + 40 Cartridges w/Primers + 40 Lead Bullets. This rare rifle is in very fine to excellent condition!

categories:Sporting GoodsGuns

4975 impressions

651 views

6.0L/ 99.6hrs 1 owner Hamilton 212 pump Center carpeted gun / life jacket drawer Daul batteries with battery control Wash down pump Sand trap Travel cover Padded window travel cover Half camper quick roll up windows Full camper top in new condition Livorsi gauges Polka audio / 4 speakers 8 degrees wide body This boat runs the water nice and efficient for some nice exploring on the rivers with family and friends. The boat is still currently winterized. I do not need help from sales agents. I do not need to sell this boat. Will not reply to low ball offers No resonable offer refused . Text me @ (780)814-4356

categories:Auto and Trailers

3196 impressions

302 views

6.0L/ 99.6hrs 1 owner boat Hamilton 212 pump Bench back seat / storage Moveable front seats Daul batteries with battery control Wash down pump Sand trap Travel cover Padded window travel cover Half camper quick roll up windows Full camper top in new condition Livorsi gauges Polka audio / 4 speakers The boat is still currently winterized. No resonable offer refused . Text me @ (780)814-4356

categories:Sporting GoodsBoats

3162 impressions

345 views

For Sale 2004 Jeep Wrangler Rubicon with approximately 180,000kms. In Good shape with some dings and marks. The Jeep is more or less stock with a few “upgrades” as things needed to be replaced or additions where wanted. 4.0L Manual 4x4. - Control arms were replaced with adjustable length. - Coil Springs were replaced with a variable rate spring. - Fox Steering Stabilizer. - Black American Racing wheels. - LED head lights - Smitty Built front and rear Bumper with a 10K winch. Set up with an aux fuse block for extra lights and such should you want, however none currently installed. Interior is clean and in great shape. Tuffy lock box mounted under driver’s seas as well as steel lockable center console. Weather Tech floor liners front and back. With Carhart seat covers keeping the elements off the seats with the roof off. Comes with Both hard and soft tops. Drive line fluids recently changes, new rad and power steering lines. New rear wheel bearings, axel seals and chromoly rear axel shafts. Tires are at approx. 75% rolling on BFG KO2’s. Jeep can come with a wide assortment of spare parts off another 2004 Rubicon that met an untimely fate and was stripped prior to scrapping Just Bough a new Bronco bring our total vehicle count to 5 thus the selling of the Jeep. We are NOT interested any trades of any sort. We do NOT need help selling. In person dealings only we will NOT entertain the third part shipper/pick up scam. CASH ONLY no pay pal, bit coin, unicorn farts ect. Asking $$13500 or best reasonable offer. Additional pictures/info on request. Call or Text Hope or Scott at Hope 403-360-3176 Scott 403-892-3092

categories:Auto and TrailersSUVs

4207 impressions

579 views

Large black desk with small matching table and rolling file cabinet. Has an attached power bar. Desk is 30”Hx21”Dx58”W. Small table is 28”Wx22”Dx30”H. File cabinet fits under.

categories:Household Items

5698 impressions

705 views

Has its typical weather wear and tear but still in good condition. Comes with everything in picture. Had for a few years now. Will fit Chevy or dodge and maybe older ford pick ups.

categories:Auto and Trailers

2449 impressions

352 views