Includes both outer original boxes and box end tags as shown, inner box for Alberta was destroyed, Inner box for Sask is good with minor wear as shown. Both guns are 100% unfired and MINT. Matching serial numbers as shown.  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

7639 impressions

334 views

Both are made in Brazil, both are fixed full and mod chokes. Several wood only dings in both but no cracks and very little metal wear showing a very low round count. No issues. Selling both at once. 28" is a Condor 1. by IGA What a nice Christmas Gift .... get your buddy into trap shooting over the winter ...  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

7678 impressions

374 views

One of the best hunting rifles ever made, IMHO. Scope included as shown is Bushnell lower end but does the job. 3-9x40 , no issues, new stock. 24 inch barrel. Clip mag.   No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

11105 impressions

898 views

Not often seen with all these collectible features, bore is decent, appears all original, all numbers match including floor plate, shipping will be expensive as it will have over length extra charge. Est 75$ most of Canada.   More photos available if serious.   A great Christmas Present .... Please use cell phone text messaging." Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:Sporting GoodsGuns

3644 impressions

187 views

Without doubt the best made 410 I have seen in my 60 years of being a gun nut. Remarkable and works as it should. Serial number "9784X" provided so you can research history. No cracks no issues. Minor dings as shown in Photos. Shipping, if needed, at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

29859 impressions

852 views

Functions as it should with very few rounds fired. Definitely worth the $$$ removable chokes ( 1 only) Shipping, if needed, at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

24943 impressions

692 views

No expert here and info is hard to make a definite conclusion. Serial Number 97046 on all parts. Could be model 1871 Stutzer. More photos available on request. Price may be flexible if I can find same sold for less recently. Works as it should. No cracks, 33 inch barrel. Shipping in Canada extra but OK. If you have a hunting firearm you would like to "trade in" and if you can drive to me, (Sylvan Lake, Ab.) I will consider your in person (only, no exceptions please) trade ins .I have 3 rounds of ammo for it Please call or text message only. 403 556 0086 Please see my other ads. I have lots of Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you as well. PAL verification required. NO COD, cash or e transfer payment needed. Return customers always given preference.

categories:Sporting GoodsGuns

32728 impressions

2344 views

Thompson Center Icon (Bolt) in a 30TC caliber. Condition is "like new". Scope: Sightron SII Bigsky 4x16x42. Also comes with 9 full boxes of 20 (180 rounds) Hornady Custom 165 gn SST. 1 box plus 6 (26 rounds) Hornady 150 gn SST. 100 rounds of fired once brass in blue containers. This is an absolutely beautiful firearm.

categories:Sporting GoodsGuns

758 impressions

72 views

For sale brand new , X- Caliber Gauge Adapter made by Chiappa firearms. From 20 Ga to .357 Mag, 45 ACP, 9mm Luger and 410. All four are 7 " long and rifled. e-Transfer Shipping included.

categories:Other

12902 impressions

703 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

12384 impressions

436 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

10523 impressions

273 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

10821 impressions

235 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

11583 impressions

665 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19865 impressions

731 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

16010 impressions

958 views

Description The Sako 85 Finnlight rifle is for those who foray deep into the wild to reach their goal. Hunters on mountain trails or on long-distance treks prefer high-performance rifles that are full-sized, yet still lightweight. The fluted barrel of the Finnlight is just one of the many features that make it ideal for the hunter seeking a perfectly trimmed light rifle. The Sako 85 Finnlight is also an excellent choice for women and younger shooters. SPECIAL FEATURES BARREL The specially engineered fluted barrel of the Sako 85 Finnlight reduces rifle weight and also accelerates the barrel cooling. STOCK Sako 85 Finnlight has a reinforced black polymer stock with a soft grey pattern on its grip surfaces and a Soft Touch surface treatment. ACTION Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing. BARREL Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish. MAGAZINE The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release. SAFETY The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged. SIGHTS Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage. STOCK The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation. TRIGGER The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. *NO HOLDS **Accepted method via Email transfer & cash *** gently USED hunting firearm from my safe. I've used this firearm on a number of hunts in the last two years. It is a well maintained firearm that equipped Sako opilok rings and a Vortex Viper 3-9x40 scope plus a Sako sling. I can deliver to Saskatoon area ONLY

categories:Sporting GoodsGuns

10656 impressions

327 views

GENTLY USED FIREARM in excellent condition. Maybe 20 Rounds or so fired. Kept in a safe and cleaned after each use. Henry Classic Lever Action .22 Magnum Model Number H001M Action Type Lever Action Caliber .22 WMR Capacity 11 Rounds M.S.R. Price $609.00 usd plus taxes Additional Specifications Barrel Length 19.25" Barrel Type Round Blued Steel Rate of Twist 1:16 Overall Length 37.5" Weight 5.50 lbs. Receiver Finish Black Rear Sight Fully Adj. Semi-Buckhorn Front Sight Hooded Blade Scopeability 3/8" Grooved Receiver Scope Mount Type Ringmounts for 3/8" Groove Stock Material American Walnut Length of Pull 14" Safety 1/4 Cock Best Uses Target/Hunting/Small Game ***I paid over a $1000.00 cad.*** PRICE: $900.00 or best offer PREFERED: via cash or email transfer SHIPPING & DELIVERY EXTRA *** delivery is only available for Saskatoon area ABSOLUTELY NO HOLDS PLEASE ONLY SERIOUS BUYERS TO PURCHASE: A VALID PAL IS REQUIRED NOTE picture is similar to the rifle I am selling ***NOT MY PICTURE

categories:Sporting GoodsGuns

8706 impressions

478 views

Please text anytime 6476871484. Brand new in original box. Special addition extra durable version. All hardened steel construction. Rifled barrel. Very light single action trigger. Excellent fit and finish. Low cost to shoot using standard .177 lead pellets BBs and #11 or #10 percussion caps. Legal in Canada without a PAL Firearms License. Smallest pellet pistol I know of! It is a reproduction of the extremely rare Remington Rider Single Shot Derringer pistol of which only about 200 were produced 1860–1863. Small pistols suitable for indoor practice were called parlor pistols. The pistol is of steel construction, available with polished white or case hardened finish. Like the original, the pistol fires a .17″ (4.5mm) ball or pellet using only a percussion cap and no powder charge needed but can be added for different power levels. To fire it, shooters place a ball into the breech plug small tube (which is capped) inserted against the barrel. The hammer fires a # 11 or 10 cap, which expels the ball. Caliber 4,5 mm Twist 450 mm (1:18″) Barrel’s length 52 mm Overall length 120 mm Weight 0,155 kg

categories:Sporting GoodsGuns

64314 impressions

6100 views

Please text anytime 6476871484. Durable high quality construction. No PAL required. Comes with box of 100 super penetrator pellets. Looks like a .45 1911 firearm...and just as accurate! Made in Germany by the legendary Weihrauch company, the HW45 is considered by many to be the Holy Grail of air pistols. This is an heirloom airgun that you'll pass along to your grandchildren and beyond. The gun's heft and balance convey quality and substance. It fills your hand without feeling bulky or oversized. The unusual overlever cocking mechanism compresses the powerful mainspring, and the hammer is actually the catch for it. Highly adjustable two-stage trigger, which has a serrated surface for more control, will help you extract maximum accuracy from the HW45. In fact, the adjustable trigger is so crisp, you'll wish it was on your firearms. The dovetail grooves are extra wide, and our accessory list has several 11mm to 14mm mounts that are known to fit. Unlike many modern air pistols, the HW45 isn't made of molded synthetics. It's a solid metal gun with finely checkered grips. And, it's ambidextrous. The 11mm dovetails make it easy to mount a pistol scope or a red dot sight. The HW45 has two power levels. The different power levels are created by cocking the gun to different lock points. See the detail shots to see how to cock the gun for high power and low power. The distance you shoot, the weight of the pellet and the type of target will let you determine which power level is best. The HW45 is an excellent indoor trainer for those who shoot the M1911A1. Caliber .22 (5.5mm) Max Velocity 460 fps Muzzle Energy 5.59 ft/lbs Spring-piston Loudness 3-Medium Trigger Pull 1.75 lbs Barrel Rifled Barrel Length 6.54" Overall Length 11.0" Capacity 1 round(s) Cocking Effort 18 lbs

categories:Sporting GoodsGuns

18197 impressions

1212 views

Please text anytime 6476871484. New. No PAL required for unassembled cartridges. 32RF long and short reloadable rim fire cartridges ammo new production $10 each. Those are new production reloadable cartridges especially made for antique firearms. Each set comes with Bullet, Brass/Case and .27cal blank cartridge as primer. $10 unassembled. Those are improved version of modern 32rf ammo and they do not require to be loaded in a special way to work properly. Brass is twice as thick compared to regular to provide additional durability and safety for pocket revolvers with thinner cylinder walls. They come with polymer coated bullets weighting 100grn, 95grn, or 75grn of your choice and do not require to be lubed. Power of .27 blanks is enough to shoot bullets with speed up to 500-600fps without any additional powder needed.

categories:Sporting GoodsGuns

16218 impressions

705 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:Sporting GoodsGuns

6689 impressions

446 views