Photo of Brand new Mastermount Rear Biased Optic Mount $200
$200
Brand new Mastermount Rear Biased Optic Mount $200
Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.
categories:Sporting GoodsGuns
5259 impressions
522 views
Calgary, AB2 months ago
Photo of Henry Classic Lever Action Rifle .22 S/L/LR H001
$499.99
Henry Classic Lever Action Rifle .22 S/L/LR H001
Henry Classic Lever Action Rifle .22 S/L/LR H001 Reduced from 599.99$ to 499.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Henry Classic Lever Action Rifle .22 S/L/LR H001 The Henry Lever Action is a classic Western-style lever action rifle, and one of the most popular .22’s on the market today. The reason for its popularity is because it shoots great, looks great and is remarkably affordable – about half the price of the competition’s rifles. The Henry Lever Action rifle features an extremely attractive American walnut stock, the quality of which can only be found on guns three times the price. The action is exceptionally smooth, so smooth many first timers remark that they cannot believe the rifle has any internal parts. You simply have to get one into your own two hands and cycle the action a few times to see for yourself. The Henry Lever Action also features side ejection, an adjustable rear sight, a hooded front sight and a 3/8″ grooved receiver for mounting a scope. The blued steel barrel is machined with state of the art multiple groove rifling. The result is a highly accurate shooter. The barrel length is 18¼”, overall length is 36¼” and it weighs in at a very comfortable 5¼ pounds. The easy to load tubular magazine can handle 15 rounds of .22 Long Rifle, 17 rounds of .22 Long and as many as 21 rounds of .22 Short, making it a viable alternative to a semi-automatic .22. And, a lot more fun to shoot. Model Number H001 Action Type Lever Action Caliber .22 S/L/LR Capacity 15 LR/17 L/21 S Barrel Length 18.25″ Barrel Type Round Blued Steel Rate Of Twist 1:16 Overall Length 36.5″ Weight 5.25 lbs. Receiver Finish Black Rear Sight Fully Adjustable Front Sight Hooded Blade Scopeability 3/8″ Grooved Receiver Stock Material American Walnut Buttplatepad Plastic Length Of Pull 14″ Safety 1/4 Cock Best Uses Target/Hunting/Small Game
categories:Sporting GoodsGuns
21475 impressions
2051 views
Moncton, NB3 months ago
Photo of Reduced - Winchester Model 1895 Sporting Rifle in 30-40 Krag Ref #1047
$1100
Reduced - Winchester Model 1895 Sporting Rifle in 30-40 Krag Ref #1047
Winchester Model 1895 Sporting Rifle in 30-40 Krag Ref #1047 Winchester Model 1895 Sporting Rifle in 30-40 Krag with 28" round barrel, lever action dated app. 1903. Factory wood is good, a small piece missing on right forend, can be seen in photo. Bluing is app. 40% throughout. Light scratches on both sides of the receiver. Above average bore for time frame, bore has rifling top to bottom, typical black powder corrosion. Screws show minimal use. Original sights fully intact. Operationally everything appears to be good. Cycles well, strong hammer spring and safety works. Only reasonable offers will be considered. No trades please. Standard Disclaimer, some items may not apply. The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion. Thanks, Darcy Darcy's Estate Liquidations
categories:Sporting GoodsGuns
8315 impressions
774 views
Medicine Hat, AB4 months ago
Photo of Reduced - Winchester Model 1892 25-20, Ref #1038
$1400
Reduced - Winchester Model 1892 25-20, Ref #1038
Winchester Model 1892 25-20, Ref #1038 Winchester lever action, sporting rifle, round barrel, full length magazine. Dated app. 1916. Stock is excellent, a few minor marks, small chip at tang, and butt stock was drilled for a sling swivel. Barrel is 24” long with sights intact. Bore is rough from black powder use. Bluing throughout at about 80%. All screws look good. Functionally everything seems very good. Only reasonable offers will be considered. No trades please. I will ship anywhere in Canada for $60.00. Insurance is extra. Standard Disclaimer, some items may not apply. The firearms and accessories I sell may be new or used, and are usually acquired through estate liquidations. I visually inspect them and check basic operation only, and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find, but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competant gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammuntion. Thanks, Darcy Darcy's Estate Liquidations
categories:Sporting GoodsGuns
6543 impressions
561 views
Medicine Hat, AB4 months ago
Photo of ANTIQUE (no PAL) Remington 1858 New Army .44 Caliber Project Revolver (parts available to fix)
$1245
ANTIQUE (no PAL) Remington 1858 New Army .44 Caliber Project Revolver (parts available to fix)
This is a budget friendly fixer upper Remington Model 1858 New Army revolver chambered for .44 caliber - price OBO. This revolver would have been born around the US Civil War, and based on level of wear probably saw use in the battle field before being harvested for parts at some point. Who knows what this revolver has seen in its long and resolute time on earth. Luckily it shows promise to be revived as parts still move freely and are not bound up. All required parts are available online, such as from Dixie Gun Works who accept international orders. Based on putting a cart together total cost would be expected to be below $200 USD, probably working out to about $350 CAD all said and done after shipping. https://www.dixiegunworks.com/index/page/category/category_id/409/name/Remington+M1858+New+Model+Army+and+Navy/ These are a very sought after and collectible model. Functional, a large caliber Remington Revolver in this shape this would generally go for $2000-$3000, with the only other one currently listed at $3800. Honestly I just don't have the time or interest to wait for the parts to show up and repair. My laziness is your gain. By my judgement, this revolver has the following issues: Barrel: loosened 1/16th turn, missing front sight and loading lever catch. Gouge around circumference and a couple dents. Frame: Cylinder pin is undersized (should get a replacement), needs seating lever and trigger guard/trigger guard screw Action: Needs cylinder hand, trigger return spring, and mainspring Overall these parts all appear to be available online from several websites including Positives are that the hammer and trigger move very freely without evidence of rust, and that the cylinder stop, trigger, and hammer interface all seem correct so that with a trigger return spring, mainspring, and cylinder hand all should be able to resume action operation and lockup. Probably a new cylinder pin would be beneficial for this also. The hardwood (walnut) replacement grips are very sturdy and fit well. The rifling is still present and does not look too worn. The frame is in great shape, with an "antiqued" dark grey patina that shows no evidence of active pitting. Overall a promising revolver for repair for an opportunistic buyer to add value. Please feel free to call or message for more details, photos, or videos. Comes with FRT antique report. No PAL, 18+ Ships Canada Check my ads for more antiques! I make no claims about the safety of firing ANY antique revolver. Ask a gunsmith
categories:Sporting GoodsGuns
10352 impressions
772 views
Calgary, AB4 months ago
Showing 21 of 200 records
Location
Search within
of
Categories

Other
Medical Equipment

Transportation options

Local Pickup177Can Deliver16Can Ship117