Photo of Swiss M1882 Service Antique Revolver, 7.5mm/32 S&W  Swiss Ordnance $43500
$4350
Swiss M1882 Service Antique Revolver, 7.5mm/32 S&W Swiss Ordnance $43500
Please text anytime 6476871484. Fully functional double action revolver in ready to shoot perfect like new condition. No PAL required. Ammo is available but sold separately. (original ammo also can be bought in stores) Comes with FRT paperwork. Tested with smokeless powder and modern ammo. Swiss M1882 Service Revolver, 7.5mm Swiss Ordnance This is a very well made revolver, based on the Chamelot & Devigne and Nagant designs, modified by Swiss firearms designer Rudolf Schmidt. The gun utilized George Abatis' unique safety which disconnects the hammer from the trigger when the loading gate is open. This allows the shooter to advance the cylinder using the trigger to quickly load or unload the chambers. The gun is in excellent condition, with 99% of the blue intact. The straw colors on the hammer and trigger are still well visible. The action is crisp and accurate, and the cylinder indexes and locks properly with zero play. The bore of the 4 1/2inch barrel is good with sharp rifling. The barrel was replaced by arsenal with newer one dated 1902 but it doesn't affect antique status of the gun. Matching serial numbers and assembly numbers. The gun is chambered for the 7.5mm Swiss Ordnance cartridge, but shooters in Switzerland frequently use the .32 S&W Long cartridge instead. Excellent overall. History & Background Swiss M1882 military revolvers are fairly scarce on the Canadian antique market. Although the arsenal at Bern produced over 37,000 pieces between 1883 and 1937, only those with a serial number below 7508 are considered antique in Canada. The M1882 was produced by both the SIG Neuhausen and the Bern factories for military use and private sale. Specimens with a serial number below approximately 20,000 were fitted with plastic grips bearing the Swiss cross. Later models would be fitted with plain wooden grips. The M1882 saw a slight re-design in the 1920’s and was re-named the model 82/29. The M1882 was in service from 1883 until the 1970’s and was carried by military, police, border patrol and home guard forces. These Swiss revolvers are usually in extremely fine condition when sold on the antique market. This can be attributed to the following two facts: firstly, Switzerland has not been involved in a war since 1847, its last armed conflict, a short-lived civil war. The second reason for the fine condition is the Swiss government’s policy to allow soldiers leaving the service to keep their side arms. Given this opportunity, most soldiers were careful to maintain and protect their guns more diligently than if it had been just an issued piece to be returned to the arsenal. The Swiss Ordonanzrevolver of 1882 is chambered for the 7.5 Swiss Ordnance cartridge, but in Switzerland the .32 S&W Long is commonly used, as it is more readily available. ​
categories:Sporting GoodsGuns
15074 impressions
1269 views
Mississauga, ON1 week ago
Photo of 12GA to 45LC  RIFLED Shotgun Adapter NEW $110
$110
12GA to 45LC RIFLED Shotgun Adapter NEW $110
Please text anytime 6476871484. Brand new. 12GA to 45LC - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 45LC ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 45LC ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions to accept 45LC ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 45LC ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.
categories:Sporting GoodsGuns
18756 impressions
1334 views
Ontario1 week ago
Photo of 12GA to 22 Magnum SMOOTH BORE - gun Adapter - Stainless NEW $110
$110
12GA to 22 Magnum SMOOTH BORE - gun Adapter - Stainless NEW $110
Please text anytime 6476871484. Brand new 12GA to 22 MAGNUM Shotgun Adapter Designed for break-open shotguns Precision machined from stainless steel made in the USA This adapter has a SMOOTH BORE This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22Magnum bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22 Magnum ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A smooth bore is gently reamed through the adapter for the bullet (no rifling). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 22 Magnum bullets Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style shotguns. This chamber / caliber reducer will NOT work with 22LR/22 long/22 short ammunition.
categories:Sporting GoodsGuns
30837 impressions
2479 views
Ontario1 week ago
Photo of 12GA to 22LR/22short SMOOTH/ RIFLED BORE  Adapter - Stainless steel NEW $110
$110
12GA to 22LR/22short SMOOTH/ RIFLED BORE Adapter - Stainless steel NEW $110
Please text anytime 6476871484. Brand new $100-110 12GA to 22 LR or 22 Short Adapter - SMOOTH BORE OR RIFLED!!! Precision machined from stainless steel Made in USA. This adapter has a SMOOTH Bore (rifled) This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22lr bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22LR or 22 Short ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A SMOOTH bore is reamed through the adapter for the bullet. Adapter orientation is not important and the adapter will work in any position. Will fit any break open gun with 2 3/4" or 3" chambers. Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 22LR / 22 Short bullets. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open shotguns. This chamber / caliber reducer will not work with 22 magnum ammunition. Any ammunition pictured is for representation purposes and is not included with this purchase.
categories:Sporting GoodsGuns
41009 impressions
3207 views
Ontario1 week ago
Photo of Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
$2100
Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...
categories:Sporting GoodsGuns
22545 impressions
677 views
Mississauga, ON1 week ago
Photo of Webley Mark1  British Service Navy Revolver .45 ACP/45 Auto/ 455 Webley. $4950
$4950
Webley Mark1 British Service Navy Revolver .45 ACP/45 Auto/ 455 Webley. $4950
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with 2 moon clips for 45ACP, 1 adapter for .455 Webley and FRT RCMP paperwork. Webley MkI* British Service Revolver Navy .45ACP/45 Auto/ 455 Webley. The this one was checked and tested for smokeless powder by gunsmith. This one was professionally modified to accept 45auto rim and .45ACP cartridges on a moon clip and also can be used with original .455 Webley ammo. The gun is in like new condition with everything tight and working like a Swiss clock and plenty of the original blue remaining. The action is accurate strong and very smooth. The cylinder indexes and locks properly without play. The bore of the 4-inch barrel is good and mirror bright, with sharp rifling. The grips are excellent and undamaged. SN 30929, very fine overall. History & Background Philip Webley & Son began making top break, hinged revolvers as early as 1880, with the Charles Pryse patented design they acquired for use on their Webley-Pryse revolvers. Soon thereafter an improved locking mechanism by Michael Kaufmann produced the Webley-Kaufmann design, followed by Webley's own improved "Government" model, or "WG". It was not until 1887, when the British military hoped to replace the Enfield revolver that the first "Mark" revolver model was introduced. The Mk I was soon followed by the MkII (1894), then III (1897), and eventually as many as six variations were made, between 1887 and 1949. The Webley top break "Mark" revolvers were probably the single most widely used side arm in the world, and were still in service as late as the 1970’s.
categories:Sporting GoodsGuns
18328 impressions
3288 views
Mississauga, ON1 week ago
Photo of Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Price Reduced to $350.00
$350.00
Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Price Reduced to $350.00
Pre-WW1 British Pattern 1821 Canadian Artillery Officer's Sword – no Scabbard Savage and Lyman Montreal Sword This company name was used by the Montreal silversmiths Savage and Lyman between 1868-1878. The left side of the blade immediately in front of the guard Is marked Savage & Lyman Montreal Within the engraving on the left side is a Crown.  Believed to be indicative of Queen Victoria. The right side of the blade has a small brass insert which says PROOF.  Wilkinson Sword introduced these Proof Discs in 1844. In the engraving on the right side of the blade is the word ARTILLERY The guard is steel and has fish skin wire bound grips with most of the fish skin having been worn away.   Length of Sword – 40 1/2” Length of Grip including the Guard – 5 1/2” Blade Length – 34 1/2”   Savage & Lyman Montreal (or Savage & Lyman and Company) were manufacturers and suppliers of swords, known for military pattern swords like those for Canadian militia units (e.g., 1st Battalion Chasseurs Canadiens), marking them as producers/sellers, though like many firms, they likely had blades forged elsewhere (perhaps by specialists like J. Martin in Montreal) and then finished, hilted, proofed, and sold by Savage & Lyman in Montreal, a common practice for armsmakers then.  Key Points: Evidence of Manufacturing: Swords clearly marked "SAVAGE & LYMAN MONTREAL" exist in museum collections, showing they were a recognized name in arms. Role: They functioned as an arms dealer and supplier, customizing and selling weapons for Canadian military and militia. Production vs. Supply: While they might not have forged every single blade from raw steel in-house, they were responsible for the final product, including proofing and adding their own markings, as seen on a 1885 Chasseurs Canadiens sword. In short, they were a key player in the Montreal arms trade, making/selling quality military swords, even if blade forging was sometimes outsourced to other specialized smiths.    $350.00 Or Best Offer   Thanks,  Phil
categories:Sporting GoodsGuns
10020 impressions
327 views
St. Albert, AB1 week ago
Showing 21 of 520 records
Location
Search within
of
Categories

Other1
Medical Equipment1

Transportation options

Local Pickup457Can Deliver40Can Ship181