Brand new The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Guns

4033 impressions

454 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

2593 impressions

446 views

Selling 2 of my rifles Valken AS1 Come with high cap mags and mock suppressor and mini silencer Mods- Upgraded inner barrel -Max hop up unit Pink(I think) maple leaf bucking -Upgraded M20 spring ( meant for out door.) -V2 brushless motor. Fps ranges from 380-410 on .25s SELLING FOR 400 O.B.O (FLIP UP HOLO NOT INCLUDED) S25 Carbine. Chrono @390 on 25s on Sunday. M4 mag compatibility Comes with a few mid cap mags, Flashlight And sight Bought last year in hopes to play indoor since it has the quick change spring but didn't get to go. And I won't use this for outdoor. Have used it for maybe 30 minutes so it's basically brand spanking new lol Looking for $300 o.b.o

categories:Sporting GoodsPaintball and Airsoft

4578 impressions

586 views

6 month old Female German Shepherd x golden retriever. Has all three sets of shots, doesn't need anymore until she is 1. Has had some puppy classes, but still very much a puppy. Doesn't bark, great with kids, not spayed. We have had to make the decision to rehome her as we have had something's come up and do not have the time and dedication she deserves. Asking $400

categories:Pets and Animals

2772 impressions

576 views

The team at Leigh Smile Center located in Westlock, AB is looking for a passionate, hard-working Registered Dental Hygienist on a part-time basis. The ideal Registered Dental Hygienist for our team will be highly motivated to educate patients on preventative dental care and oral hygiene, as well as empower them in their commitment to good oral health by developing treatment plans and home care routines tailored towards the patients’ needs. We are located 45 minutes from St. Albert. Our office has been serving this community for over 30 years with many improvements. We have 7 Operatories and currently staff 5 Dentists and two Hygienists. Leigh Smile Center is a complete Dental treatment center offering Sedation, Implants, Wisdom Teeth Extractions, Grafting, Invisalign, Botox Treatment and General Dentistry. Website Link: https://www.leighsmilecenter.com/ 123Dentist is Canada’s largest majority dentist-owned network of dental practices, with more than 400 locations nationwide and over 6,000 employees. Providing a long-term career in a growing network located in multiple communities across the country, at all levels of the industry. WHAT WE ARE OFFERING: Part-time position status Great experienced team Permanent employment Benefits Package After 3 Months Uniform Allowance State-of-the-art technologies/equipment- Cavitron, Digital Xrays, iTero Scanner, CBCT Parking available Continuing education incentives Opportunity for professional advancement Team building activities Recognition through our monthly Ambassador program Mentorship and training from highly skilled, experienced dental professionals; a great opportunity to grow and excel Collaborative team and environment to help you succeed as a Registered Dental Hygienist. Working at Leigh Smile Center you will experience a team-oriented environment as it is a massive part of who we are SCHEDULE: 32 hours per week 3-4 Days of the week WHAT WE ARE LOOKING FOR: Currently registered or in process of registering with the: College of Registered Dental Hygienists of Alberta (CRDHA) New graduates welcome! 2 years of experience is preferred Experience with dental practice management software such as Maxident is considered an asset Demonstrated ability to communicate effectively with patients and families Customer service mindset 123Dentist is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all candidates for their interest; however, only those selected for an interview will be contacted. JOB ID: 5912-RDH-AB-361

categories:Business and ServicesJobs

4005 impressions

462 views

Lac Ste. Anne Foundation Internal/External Posting Is seeking an individual to fill a casual Health Care Aide position located in our facility in Mayerthorpe. Health Care Aide – Casual position Pleasant View Lodge DUTIES Directly reporting to the LPN Team Lead, the Health Care Aide will provide assistance with resident care needs such as bathing, dressing, toileting & basic ADL, administering prescribed medications, documentation of resident’s daily progress, housekeeping (maintain general cleanliness of the facility on a shift basis) and participation in the residents individual care. QUALIFICATIONS Health Care Aid Certificate If not certified will be required to enroll in the program and the Lac Ste. Anne Foundation may assist with HCA Training First Aid Certificate Minimum of High School Diploma Some College/CEGEP/vocational or technical training SKILLS You must be a strong communicator able to communicate effectively in both written and verbal English. You are able to maintain good interpersonal relationships, and have a genuine interest in working with seniors. Lac Ste. Anne Foundation offers a very competitive salary and attractive benefit package. Closing date: Friday June 28, 2024 at 4:00 p.m. or until a suitable applicant is hired. Submit letter of intent/resume to: Lac Ste. Anne Foundation Attn: Sylvia Bonnett, Operations Manager PO Box 299 Mayerthorpe, AB T0E 1N0 Email: operationsmanager@lsaf.ca Fax: 780-786-4810 We thank all applicants but only those selected for an interview will be contacted.

categories:Business and ServicesJobs

2485 impressions

345 views

Lac Ste. Anne Foundation Internal/External Posting Is seeking an individual to fill a part time position located in Onoway. Maintenance Assistant – East Locations Onoway Description: Reporting to the Maintenance Lead, the Maintenance Assistant will provide assistance in a full range of maintenance responsibilities including preventable maintenance, corrective maintenance, grounds maintenance, inventory management, safety and security. This position entails a high level of interaction with residents/tenants/staff as well as sub-contractors, frequent travel to multiple sites operated under the Lac Ste. Anne Foundation umbrella and requires physical endurance. Essential Functions / Responsibilities: • Weekly, monthly site inspection of facilities as directed. • Perform interior and exterior repairs to facilities/suites as required • Perform urgent/emergency maintenance as required. • Ensure sidewalks and grounds safety in maintained • Maintain outdoor furnishings and outbuildings • complete inventory records as directed • Ensure a safe and secure environment while performing maintenance duties • Perform other duties as required. Skills, Knowledge, Qualifications & Experience: Proven success in the following job competencies: • basic knowledge of preventative maintenance and operations of LSAF facilities • understanding and follow relevant policies, procedures and legislation • knowledge of LSAF Programs, services and related maintenance requirements • basic knowledge of maintenance and repairs of plumbing, heating systems, boiler inspection and sewage systems • understanding of emergency procedures, First Aid/WHMIS Certification • effective verbal, listening and communication skills • stress and time management skills • Valid Driver’s License is required Lac Ste. Anne Foundation offers a very competitive salary and attractive benefit package. Closing date: Friday, June 21, 2024 at 4:00 p.m. or until a suitable applicant is hired. Submit resume to: Lac Ste. Anne Foundation Attn: Dena Krysik, Chief Administrative Officer PO Box 299 Mayerthorpe, AB T0E 1N0 Fax: 780-786-4810 Email: dkrysik@lsaf.ca We thank all applicants but only those selected for an interview will be contacted.

categories:Business and ServicesJobs

3210 impressions

389 views

I’m looking to sell my Bowtech CP28 as I got a new bow as a gift. The bow has shot less than 400 arrows, and is essentially in brand new condition. No damage, no wear. I am selling the bow without the accessories shown in the photo, but can provide a basic Stabalizer and sight if needed as I have some I don’t use at all anymore. Asking 800$ OBO. Pickup in Strathmore. Please text me for more information or to make an offer.

categories:Sporting GoodsBows

4414 impressions

740 views

Less than a box of shells they it//almost $1000 off new. Camo colour-super nice semiautomatic 20g. 5 chokes. Mint.

categories:Sporting GoodsGuns

10717 impressions

743 views

Located in Fort Mcmurray. Could possibly deliver depending on location....................................... Item prices below IF YOU TAKE IT ALL- 6k (over 15k in items if added up true value prices of items) 1. Two new prolock chain hoists- 1 new in box and the other used once. Over $300 each, $400 takes both 2. Milwaukee Vacuum, Does not come with battery or charger. Used a handful of times $100 3. DELL Latitude 14 rugged Extreme 7414 Laptop. Recently formatted and ready for use. $300 4. Direct Weld Square Trailer Jack (12,000 lbs) 12.5” travel $200 ($500 new) 5. New John Deere Hydraulic Cylinder for Skidsteer (56x32-444.5) $500 (over $1000 new) 6. New Zerostart Vibra Dump Truck Body Vibrator $500 (over $1000 new) 7. Brand new Quaker city Grinding hand mill $200 8. New King size weighted blanket $180 9. 7ft Skinny bar and 100lbs of weights $100 10. Engine blockheater $60 11. Zerostart engine/tank/various electric inline heater $160 12. New 3600 watt 240V Mr Heater $120 13. LG double wide computer monitor. Comes with wall mount $200 firm 14. Spare skidsteer tire sks 532 14-17.5 NHS 15. New Enthuze blackout series sidebar/steps for 2019-2024 rams $300 16. Four used 3 ton come alongs. $300 for all four 17. A/C Manifold and hoses $160 18. 2 rotors that fit 2013-202 f250 ¾ ton, 2013-2016 f450 super duty, 2013-2020 f350 super duty $200 19. 2 rear rotors for 18,19,20,21 Ford expedition & 18,19,20 f150 $260 20. New Fill Rite Fuel meter $260 21. 6 New LED work/offroad lights $140 for all 22. TRUX LED headlight & Brights set. Was for a Ford but traded truck. $280 for the set 23. CAT 160m3 Circle wearpad/shim kit. SN# N9K over 4k new 3k takes it 24. New in box 2 rear ford rotors for F250-2013-2022 and 2013-2022 $300 25. New John Deere Air Intake Tube over $1000 new, $500 takes it (fits 350D-350DII-350DW-400D-400DII) 26. New John Deere loader frame wiring harness. Over $1300 new, $800 takes it. (fits 444j-544j-624j-644j-724j) 27. 09-12 Dodge ram 1500 RH headlight assembly. $160 28. John Deere 1000hr service kit, was for a 332G but fits 330,331,332,333 skidsteers. $300 29. New John Deere starter, over $600 new, $400 takes it. List of compatible equipment in this link https://shop.deere.com/us/product/SE501406%3A-REMAN-Starter-Motor/p/SE501406 30. RS80 RIV Roller Chain- Standard Series, 80 / 1 in Pitch, Riveted, Carbon Steel Material, 10 ft Length. $600 new, $300 takes it. 31. 2 New Ford FA-1950 air filters $70 new $40 each takes them.Fits fords f250-f600 years 2020-2023 32. New Ford FD-4625-aa Fuel Filter kit $100 33. 2 new Ford BRAB-588 Wheel abs sensor. $100 each 34. 2 new 50ft ½” flexilla air hoses (one is just dirty and out of the package)3. $50 each 35. New Hub assembly for Ram 4500-5500. $280 Compatibility in link https://www.napaonline.com/en/p/BRGBR930508 36. Ten Dewalt 16 x 5/32 x 1 cutoff wheels $15 each 37. 1 Gold 12”x1/8x20mm cutoff wheel $5 38. 3 14x1/8x1 Makita cutoff wheel $5 each 39. 3 16”x7/64x1” cutoff wheels $5 each 40. Five 6’ LED all purpose buggy whip $100 each 41. Two new Komatsu Alternators $400 each fits HM350, HM400, S6D140E, SA6D140, SA6D140E, SAA6D140E, SDA6D140E, WA500. Replaces 600-825-7111 42. 4 Cab air filters for JD and Hitachi excavators ($25 each) fits 75G-85G-245GLG-135G- ZX85USB-5- ZX75US-5- ZX245USLC-6- ZX135US-6 43. 3 Cab Air filters ($40 each) fits EXCAVATORS: 75C, 75D, 75G, 80C, 85D, 85G, 110, 120, 135C, 135D, 135G, 160LC, 200 CLC, 200LC, 210CW, 225 CLC RTS, 225 DLC, 230 CLC, 230LC, 230 LCR, 230L CRD, 245 GLC, 270 CLC, 270LC, 330 CLC, 330LC, 330 LCR, 330 LCR, 370, 370C, 450LC, 550LC, 750, 2054, 2154D, 2454D, 2554, 2954D, 3554, 3754D 44. New JD shift selector Switch AT176801 For John Deere 444H 544G 544J 524K LX230-5 WL56 $300 45. 3 new rolls 1.5” x 50’ and 1 roll 1.5”x100’ Extreme 400 Fire Hose NFPA threaded ends $100 each 46. . New Deutz turbo charger Turbocharger 04299152 for Deutz Engine TCD2013L042V Replace Part Number: 0429 9152, 04299152, 4299152, 0450 5491, 04505491, 4505491, 04299152KZ, 4299152KZ Applications: Fit For Deutz Engine:TCD2013L042V, TCD2013L04 2V 47. 12 new J350 twin tiger teeth- $600 for all

categories:Tools and Equipment

11884 impressions

1197 views

Product details Brand - VEVOR Power source - AC/DC Colour - Black+Yellow Maximum pressure - 2000 Pound per Square Inch Item weight - 9 Pounds Hose length - 30 Feet 2000PSI High-pressure Washer: Built with a powerful motor that generates a high water flow rate of up to 1.76 GPM. Hence, VEVOR’s electric pressure washer can completely clean up old paint, oil, weed, and other stubborn stains. Ideal for homes, RVs, patios, fences, decks, driveways, cars, lawn equipment, etc. Automatically stops working when temperatures reach over 105℃, ensuring ultimate security and consistent high quality performance. It is ETL certified. Extended Hose & Leak-proof: A 30 ft hose allows for flexible cleaning in any large area. Our high-pressure washer adopts a sturdy metal water inlet and outlet to avoid water leakage, so you no longer have to worry about water spraying everywhere. Get ready to get every job started right. Easy to Move & Install: Our power washer made of compact PP plastic features effortless transportation due to an ergonomic handle and 2 universal wheels. Also, just one person is needed to complete the assembly in minutes, which means you'll get your cleaning chore done faster and easier with less strain and fatigue. Provide Security for You: Are you tired of your energy depleting rapidly? Well, get ready to run longer and better. Built-in TSS (Total Stop System) automatically shuts off the pump when the trigger is not engaged to save energy and prolong the service time of the electric power washer. A press-type security lock prevents the spray gun from being engaged accidentally. We recommend not using it for over 3 hrs at a time. 5 Nozzles for Different Jobs:The pressure washer provides 5 quick-connect metal spray nozzles ( 0°/ 15°/ 25°/ 40°/ Turbo Nozzle ) and a 500 ml self-spraying detergent bottle for best suiting your different cleaning tasks. The water inlet filter makes the water nozzles spray smoothly without any blockage. Therefore, you do not need to change nozzles frequently, saving unnecessary expenses.

categories:Tools and Equipment

1650 impressions

327 views

We have a litter of 7 puppies, born May 2 (3 weeks in photos). They will be ready to go to their new homes after July 27. Mom is a maremma crossed with a standard poodle and dad is a purebred miniature Australian shepherd. All puppies have been seen by the vet, and will be seen once more before they go to their new homes to get their first vaccination and deworming. There is 4 females and 3 males. All have similar markings of black, brown and white. Although there is one male and one female who have more of a ‘merled’ pattern in their faces. Asking $400 each, and a proper vetting process will be taking place before they are able to go to their new homes. Asking for a $100 deposit if there is a specific one you would like me to hold for you. Please send a text message (no calls) if you would like more information and photos :)

categories:Pets and AnimalsDogs

6133 impressions

1039 views

We have a litter of 7 puppies, born May 2 (3 weeks in photos). They will be ready to go to their new homes after July 27. Mom is a maremma crossed with a standard poodle and dad is a purebred miniature Australian shepherd. All puppies have been seen by the vet, and will be seen once more before they go to their new homes to get their first vaccination and deworming. There is 4 females and 3 males. All have similar markings of black, brown and white. Although there is one male and one female who have more of a ‘merled’ pattern in their faces. Asking $400 each, and a proper vetting process will be taking place before they are able to go to their new homes. Asking for a $100 deposit if there is a specific one you would like me to hold for you. Please send a text message (no calls) if you would like more information and photos :)

categories:Pets and AnimalsDogs

5015 impressions

838 views

For Sale - Reclining Sofa and Loveseat. No rips or stains, pretty good condition, one side of loveseat doesn't recline but I think it's just the activation lever that detached from the mechanism. Asking $400 OBO for set. If interested email or leave a message.

categories:Household ItemsFurnitureCouches and Chairs

2738 impressions

806 views

I have for sale a browning a5. In near mint condition, not many rounds at all through it. Would like to trade for beretta a400 or Benelli SBE.

categories:Sporting GoodsGuns

13957 impressions

997 views

Selling my custom semi auto tactical shotgun In great shape only shot a box of bullets through it don’t have time to use it and just sits around collecting dust comes with trigger lock and case and 5 defender bullets I’m asking $400 if interested text me thanks 5878125153 or email me rjabbour104@gmail.com

categories:Sporting GoodsGuns

15880 impressions

1977 views

looking for a beef steer, 400 t0 600 lbs please in lac ste anne or barrhead county

categories:Pets and AnimalsLivestock

3317 impressions

527 views

HUGE GARAGE SALE. TOOLS, CHAIRS. BAR STOOLS. GLASSES, DISHES, COMPRESSOR, PHENUMATIC TOOLS, HANDS SAWS AND MUCH MORE. THE DATES ARE 26 APRIL 4:00 pm to 7:00 pm & 27 APRIL 2024 FROM 10:00 AM TO 3:00 PM DAILY. IT IS A CASH ONLY. NO E-TRANSFERS WILL BE ACCEPTED. ADDRESS : 55 CREEKSIDE CLOSE, SPRUCE GROVE

categories:Household Items

2273 impressions

560 views

HUGE GARAGE SALE. TOOLS, CHAIRS. STOOLS. AREA RUGS, GLASSES, DISHES, COMPRESSOR, PHENUMATIC TOOLS, HANDS SAWS AND MUCH MORE. THE DATES ARE 26 APRIL 4:00 pm to 7: 00 pm & 27 APRIL 2024 FROM 10:00 AM TO 3:00 PM DAILY. IT IS A CASH ONLY. NO E-TRANSFERS WILL BE ACCEPTED. ADDRESS : 55 CREEKSIDE CLOSE, SPRUCE GROVE

categories:Household ItemsGarage sale

3627 impressions

581 views

The team at Kallanpally Dental Clinic located in Slave Lake, Alberta is looking for a passionate, hard-working Registered Dental Hygienist on a part-time basis. The ideal Registered Dental Hygienist for our team will be highly motivated to educate patients on preventative dental care and oral hygiene, as well as empower them in their commitment to good oral health by developing treatment plans and home care routines tailored towards the patients’ needs. Our dedicated team of dentists and dental professionals understands the importance of preventative dental care for your family. We’re here to brighten smiles and lives by leading the path to a healthy future! 123Dentist is Canada’s largest majority dentist-owned network of dental practices, with more than 400 locations nationwide and over 6,000 employees. Providing a long-term career in a growing network located in multiple communities across the country, at all levels of the industry. WHAT WE ARE OFFERING: • Part-time Permanent employment • Benefits Offered • State of the art technologies - iTero • Free parking available • Continuing education incentives • Opportunity for professional advancement • Team building activities • Recognition through our monthly Ambassador program • Mentorship and training from highly skilled, experienced dental professionals; a great opportunity to grow and excel • Collaborative team and environment to help you succeed as a Registered Dental Hygienist. Working at Kallanpally Dental Clinic, you will experience a team-oriented environment as it is a massive part of who we are SCHEDULE: • 25 hours per week • Our clinic is open Monday to Friday WHAT WE ARE LOOKING FOR: • Currently registered or in process of registering with the: College of Registered Dental Hygienists of Alberta (CRDHA) • New graduates welcome! • Experience with dental practice management software such as Power Practice PX is considered an asset • Demonstrated ability to communicate effectively with patients and families • Customer service mindset 123Dentist is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all candidates for their interest; however, only those selected for an interview will be contacted. JOB ID: 5014RDH-AB-097

categories:Business and ServicesJobs

7844 impressions

898 views

Lac Ste. Anne Foundation External Posting 1 – FT Position Site Manager – Chateau Lac Ste. Anne, Onoway Description: Directly reporting to the Operations Manager, the Site Manager is accountable for: Facility Management, Resident Relations, Resident Health and Wellness, Hospitality Services, Human Resource Management, Quality Assurance, Health and Safety, Financial Accountability and Reporting. This position entails a high level of interaction with personnel and residents. The Site Manager is ultimately accountable to oversee the daily operations of the 50 unit site. Formal Education and Certification • Diploma in Business Management or related field. • Must have proficient knowledge in Human Resource Management, Recruitment and Retention, Job Descriptions, Performance Review Methods and Techniques, Training and Career Development, and Mentoring and Coaching. • Demonstrated knowledge of, and ability to interpret, all relevant Acts (i.e. employment legislation, Occupational Health and safety Act, Human Rights etc.) and all applicable regulations. • Interviewing Skills. • Customer Service Skills. • Conflict Resolution and Negotiation Skills. • Must submit a level 4 Criminal Record Check Personal Attributes • Excellent interpersonal and leadership skills including demonstrated ability to motivate staff and volunteers. • Exceptional strategic planning and project management skills. • Strong writing and oral communication skills and attention to detail. • Ability to work effectively in a fast-paced environment while meeting tight deadlines. • Proven analytical and problem solving skills. • Flexibility to work extended hours and weekends as required. Lac Ste. Anne Foundation offers a very competitive salary and attractive benefit package. Closing date: Friday April 19, 2024 at 4:00 p.m. or until a suitable applicant is hired. Submit resume to: Lac Ste. Anne Foundation Attn: Sylvia Bonnett, Operations Manager PO Box 299 Mayerthorpe, AB T0E 1N0 Email: operationsmanager@lsaf.ca Fax: 780-786-4810 We thank all applicants but only those selected for an interview will be contacted.

categories:Business and ServicesJobs

3029 impressions

359 views