Brand new Non-restricted Lever Action Caliber: .22 LR Capacity: 16 LR / 21 Short Length of Pull: 14″ Barrel Length: 20″ Overall Length: 38.50″ Receiver Finish: Black Receiver Material: Steel Safety: 1 / 4 Cock Stock Finish: Group Brown / Tan Stock Material: Wood Twist: 1:16″ Weight: 6.50 lbs Barrel Description: Octagon Barrel Finish: Blued Large Loop Stock Finish: American Walnut Sights: Brass Bead Front, Adjustable Semi-Buckhorn Rear Made in USA

categories:Sporting GoodsGuns

7876 impressions

600 views

Selling/trading a Mauser Model 71 that's been converted to a single shot .22 lr. Receiver dated 1875. Overall it's in very nice shape. Original length barrel which has a short sleeve at the chamber (sleeve runs about 1/3 the length of the inside of the barrel). Bluing is in nice shape throughout with only light spots of fading here and there. Wood stock is also in very nice shape with no major blemishes. Topped with its original sights, retains its bayonet lug and will come with sling pictured. A very unique rifle overall. Looking for $995 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

458 impressions

44 views

Mossberg Model 340BA 22 short, long and LR,24 inch barrel, Excellent bore, Rear diopter sight, removable mag. Very good condition. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

12638 impressions

680 views

Wanted farmers or ranchers with a problem with gophers. Will eliminate your gopher problem. I'm 76 yrs. old and can start with 22 cal. air rifle (pellet), 22 shorts, 22 long rifle, 17 HMR and 223 Rem. Depending of your location, help with fuel and ammunition cost would be appreciated. Call 780-217-1798 or email - NO TEXT or MESSAGES please.

categories:Business and ServicesJobs

63730 impressions

5329 views

NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:Sporting GoodsGuns

212376 impressions

17634 views

J. Stevens Model Springfield 85 semi-auto rifle in .22 Short, Long or Long Rifle Cal. Long Rifle Only as Automatic. This model has the ability to fire semi-auto with the bolt handle pulled out, or single shot with the handle pushed in. It has a 24 inch barrel adjustable, a blade front sight and an adjustable elevator notch middle sight. The hard wood stock is a smooth grip with a black fore end and black ribbed buttpad, . It has a sharp/ clean bore and is in excellent working order. Period correct Weaver 4X scope, with sling. Comes with one magazine. $475.00

categories:Sporting Goods

5153 impressions

759 views

Selling a Browning BLR Model ’81 Takedown Lightweight chambered in .270 Winchester Short Magnum. I'm not the first owner, and it has not been fired during my ownership. It features a 22" blued barrel, detachable box magazine, and the takedown design makes it easy to transport or store. There are some dings on the walnut stock and light decoloration on the forearm, as seen in the photos. Comes with scope bases already installed for optics. Price is firm. No trades. Valid PAL required and will be verified before transfer.

categories:Sporting GoodsGuns

52095 impressions

2652 views

10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 11) Winchester pre 64 Model 94 / 1894 - Saddle Ring Only - $85.00 Screws 14) 6-48 Filler Screws (4) - Blue $20.00 15) Win 1890-06-62 Tang Screw - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw - 40.00 18) Win 1894-1892-1873-1895 Tang Screw - 40.00 19) Win 1894-1892-1873-1895 Upper Tang Plug Screw - 35.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long - 35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 45.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) - 45.00 27) Win 1892 -1894 SRC Front Band Screw - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 35.00 30) Win 1885 High Wall Tang Screw - 35.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads.

categories:Sporting GoodsGuns

58723 impressions

1445 views

I have for sale some rare and very collectable Winchester dummy ammunition. Group includes 308, 38 special, 22WMR, 22 LR and 22 short. These are original Winchester factory, dummy cartridges not Commemorative or Centennial ammunition. $40 for the group.

categories:Sporting GoodsGuns

1568 impressions

177 views

A variety of magazines for sako Browning ruger Winchester and Remington rifles. PAL REQUIRED Shipping flat rate $20 with Canada post Winchester 88 magazine 2 available 175 each plus shipping Browning BLR magnum action 7mm rem mag, 300 win mag 3 available $110 plus shipping Browning BLR long action magazine 3006, 270 win, 280 rem, etc. $110 plus shipping Browning BLR short action 308 win 243 win, 7mm-08, 358 win etc $110 plus shipping Browning Xbolt short action 308, 243, 7mm-08 etc. $90 plus shipping Browning buckmark 22lr magazines $ sold Browning 1911 22lr magazine $sold Ruger 10/22 magnum magazines $sold Ruger 10/22 magazine $25 plus shipping multiple available Remington 760, 7600 all metal magazine for 3006, 270 win, 280 rem, 35 whelen etc. SOLD Remington 7600 magazine plastic bottom for 3006, 270 win, 280 rem, 35 whelen, etc $sold Remington 750, 7400, 742 magazine metal bottom 308, 243, , etc. $150 plus shipping New Sako 85 and sako 90 short action 308 win, 243 win, 7mm-08, 338 federal etc. $250 plus shipping New Sako 85 and Sako 90 short action 22-250 magazine $225 plus shipping New sako 85 ans sako 90 extra short action magazine for 223 rem, 222 rem, 204 ruger $ 250 plus shipping NEW Sako 75 short action magazine 308 win, 243 win, 7mm-08, 260 rem, etc. $180.

categories:Sporting GoodsGuns

69315 impressions

1901 views

01.Browning BAR MKII 300 Win.mag 3 round mag.-$100.00 02.Browning BAR Belgium 300 Win.mag 3 round mag.-$80.00 03.Benelli R1 .300 WSM original mag.-$100.00 04.Tikka T3x CTR/TAC A1/Arctic 5rd Mag 308/260Rem/6.5CM-$180.00 05.Voere 243 win 3 rounds mag.-SOLD 06.XCR-M .308 win. 5-Round Pistol Mags-$40.00 07.AR15 5 Round 20 GA. Magazine-$40.00 08.Winchester 88 Caliber 243 WIN or 308 WIN 4 Round Magazine-$240.00 09.VZ58 7.62x39 5 round short magazine-$40.00 10.X-Bolt Long Magnum Magazine 388 Win Mag, 300 Win Mag, 7mm Rem Mag.-$75.00 11.Ranger XT3 .410 Bore 5 Round Magazine-$65.00 12.Savage 220 2 rounds mag.-$40.00 13.Browning BLR 7 MM.Rem.Mag.5rd mag.-$90.00 14.Sauer 303 Factory Original .300 Win Mag 5 Round Magazine -$300.00 15.Sauer 200/202 Factory Original .30-06 5 Round Magazine -$300.00 16.Heym SR30 27/30-06 Factory Original 3 Round Magazine -$300.00 17.Colt/Sauer 90 FN Factory Original .300 Win Mag 3 Round Magazine -$300.00 18.VZ58 4 magazine leather pouch –$40.00 19.Benelli Lupo 4rd Magazine Magnum Action .300 Win Mag-$80.00 20.Browning A-BOLT-3 300 Win.Mag. Black 3 RD-$120.00 21.PMAG Magpul 308/7.62 NATO 5 rounds mag.-$40.00 22.Browning BAR MKII 270/30-06 Win. 4 round mag.-SOLD 01.Mossberg 715 22LR 10 rounds mag-SOLD 02.Savage/Stevens/Lakefield 93/305/310/502/503 22WMR 5rounds mag-$40.00 each 2pcs. 03.Zastava CZ99/MP22/Rem model 5- 5 rounds .22WMR mag.-$45.00 each 7 pcs. 04.Zastava CZ99/MP22/Rem model 5- 5 rounds .22LR mag.-SOLD 05.Savage A17 17 Hornady Magnum Rimfire (HMR), 25 Rounds,Butler Creek Magazine, Polymer Black-$45.00 each-3 pcs 06.Voere .22LR 7 rounds mag.-SOLD 07.Ruger 10/22 Rotary Magazine - .22LR, 10-Round-SOLD 08.Marlin .22WMR 10 rounds mag.S/S.-SOLD 09.CZ 457, CZ 512, CZ 455 steel magazine .22 LR | 10 round-$60.00 All are used except when specified as "New". They all work in the correct gun model. Some may need fitting. All prices NOT INCLUDED SHIPPING cost! Shipping extra! Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

246609 impressions

12808 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...

categories:Sporting GoodsGuns

8001 impressions

320 views

Please text anytime 6476871484. Brand new $100-110 12GA to 22 LR or 22 Short Adapter - SMOOTH BORE OR RIFLED!!! Precision machined from stainless steel Made in USA. This adapter has a SMOOTH Bore (rifled) This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22lr bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22LR or 22 Short ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A SMOOTH bore is reamed through the adapter for the bullet. Adapter orientation is not important and the adapter will work in any position. Will fit any break open gun with 2 3/4" or 3" chambers. Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 22LR / 22 Short bullets. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open shotguns. This chamber / caliber reducer will not work with 22 magnum ammunition. Any ammunition pictured is for representation purposes and is not included with this purchase.

categories:Sporting GoodsGuns

37094 impressions

3004 views

Please text anytime 6476871484. Brand new 12GA to 22 MAGNUM Shotgun Adapter Designed for break-open shotguns Precision machined from stainless steel made in the USA This adapter has a SMOOTH BORE This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 22Magnum bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and accept any 22 Magnum ammunition. After firing simply remove the adapter and tip upside down to remove the spent 22 shell, or use your finger nail to grab and remove the shell while the adapter stays in your gun. The wide groove cut in the face will not only allow you to easily remove a spent shell but also provides a recessed clearance area for your firing pin. Adapters that don't have this recessed area (or recessed area in the wrong spot) do not provide the proper clearance for your firing pin and may damage your shotgun. A smooth bore is gently reamed through the adapter for the bullet (no rifling). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 22 Magnum bullets Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style shotguns. This chamber / caliber reducer will NOT work with 22LR/22 long/22 short ammunition.

categories:Sporting GoodsGuns

27090 impressions

2221 views

Please text anytime 6476871484. .22 BB Cap (Bulleted Breech Cap) also known as the 6mm Flobert, is a variety of .22 caliber rimfire ammunition. Invented by Louis-Nicolas Flobert in 1845, it was the first rimfire metallic cartridge. The .22 BB Cap and .22 CB Cap are interchangeable and are quiet. Place of origin France Designer Louis-Nicolas Flobert Designed 1845 Specifications Parent case tapered percussion cap Bullet diameter .222 in (5.6 mm) Neck diameter .224 in (5.7 mm) Base diameter .224 in (5.7 mm) Rim diameter .270 in (6.9 mm) Rim thickness .040 in (1.0 mm) Case length .284 in (7.2 mm) Overall length .343 in (8.7 mm) Primer type Rimfire Ballistic performance Bullet mass/type Velocity Energy 18 gr (1 g) rn 780 ft/s (240 m/s) 24 ft⋅lbf (33 J) Highly accurate bullets with a new design: • Manufactured from precision, graphite-coated lead slug • Consistently precise bullet shape down to one hundredth of a millimetre • Precise bullet weight within a tolerance of ± 0.02 g | Superior loading: • Minimum differences in bullet speed • Exact primer dose within ± 0.002 g • Propellants within ± 0.01 g | Cartridges in this series achieve excellent accuracy due to new manufacturing technology.

categories:Sporting GoodsGuns

43568 impressions

4087 views

MDT Magazine Metal short action AICS 308win / 6.5 Creedmoor 12 round on binder Plate 2.960 Max COAL These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. Available with or without the front binder plate. See details below for benefits and limitations of each version. DETAILS MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction. SPECIFICATIONS * 3.055” Outside Length * 2.870” max cartridge overall length (COAL) with binder plate * 2.960” max cartridge overall length (COAL) without binder plate (see limitations below) * 4.61” Rear Height COMPATIBILITY These magazines will need to be slightly modified to function with Howa 1500 SA rifles. * 308WIN * 6mm Creedmoor * 243WIN * 260 Rem * 6.5 Creedmoor * 7mm-08 Win * 308/7.62x51 NATO * 22 - 250 Rem (will work at a reduced capacity) BINDER PLATE DETAILS * The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”. * The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).

categories:Sporting Goods

10290 impressions

261 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

117947 impressions

7538 views

1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 3) Win post 64 Model Front Sight Hood - Short (only) - $75.00 4) Win post 64 Model Front Sight Hood - Long (only) - $75.00 5) Win post 64 Pistol Grip Cap with Red "W" Insert - 0.735" x 1.16" - $100.00 6) Win post 64 Pistol Grip Cap "W" Insert Only - 0.735" x 1.16" - $75.00 7) Winchester Pistol Grip Cap Scroll Insert Only - $30.00 --- 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 22) Win 3C - 6 Step Elevator - $50 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 24) Win pre 64 M70 - Front Sight Insert - $75 25) Win pre 64 M70 - Front Sight Hood - $40 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

47567 impressions

898 views

For Sale - one Lee Precision .270 Win Short Mag full length 3 die steel sizing dies - complete set (w/ crimp die) $75 - firm 1 set available Brand new in box - new manufacture -full length sizing die -crimp die included -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only Small package/tracked, all provinces - $22 (small box) Text, email or leave message / unable to answer phone in remote areas No trades or offers If this ad is up then item is still available. All sales are final.

categories:Sporting GoodsGuns

25396 impressions

960 views

Savage 64 22 semi auto sorry red dot does not come with the rifle and it is not used much short and light works great price 400.00 price is firm i am in no rush to sell or trade no shipping pickup only located in merigomish pictou county ns

categories:Sporting GoodsGuns

1894 impressions

307 views

I'm back to printing and selling my 3d printed ammo cases! Each case holds 100rds. The standard cases are for 22lr / short and are unmarked (unless added on), and the .17HMR and .22 WMR cases have sunken in labeling on the side. Colours can be mixed and matched to make them as custom as you’d like, nothing beats an ammo case that matches the rifle! Each case consists of 1 box, 2 inserts and 1 lid. ————pricing———— 50rd .22LR cases - 8$ each (minimum of 2 required). +1$ each for ammo type or brand printed on lid. .22lr /.17Mach2 case - 12$ each. +2$ each for ammo type or brand printed on lid. +2 for Labels on sides or ends. 200rd .22LR cases - 24$ each. Comes with 4 inserts. +3$ each for ammo type or brand printed on lid. +2$ each to fill labeling with black or white epoxy. .17HMR / .22WMR - 14$ each. +2$ each to fill labeling with black or white epoxy. +2$ each for ammo type or brand printed on lid. Custom Designs, Filament types and other add-ons can be discussed as well! The more custom, the better! Bulk rates available on larger orders. Most orders will be printed on demand so please allow a few days to get everything printed and shipped out. Bigger orders take more time and custom requests of ammo brand or type on lid take extra time to design and print. Shipping is on buyer. I generally use Canada post flat rate boxes but I can do up a quote based on postal code to get the best price. If you have any questions please reach out or if you’d like some photos of something not pictured. Check my ads in the near future for more 3d printed firearm items as I aim to have an inventory of handy shooting items or fun and useful projects!

categories:Sporting GoodsGuns

21479 impressions

610 views