Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4500
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:Sporting GoodsGuns
24378 impressions
853 views
Calgary, AB1 day ago
Photo of Lakefield 64F 22lr Semi-auto Rifle, Black, 40203SAV (minor assembly required)
$219.99
Lakefield 64F 22lr Semi-auto Rifle, Black, 40203SAV (minor assembly required)
Lakefield 64F 22lr Semi-auto Rifle, Black, 40203SAV (minor assembly required) Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Overview Formally known as the Cooey 64, the Winchester-Cooey Model 64B and the Lakefield 64B, the Savage Model 64 series is a semi-automatic .22 LR rifle made by Savage Arms in Lakefield, Ontario, Canada. It operates on a simple blowback action. It is targeted towards beginning shooters, small game hunters, and budget minded plinking. It is one of the most popular plinkers in the United States due to high accuracy, being chambered in cheap, common, and readily available .22 long rifle, and the inexpensive price. It is unusual among semiautomatic 22s, and traditional (non-bullpup) semiautomatic rifles in general, in that it is available in a true left handed version (left handed safety, charging handle and eject -presumably wrong handed twist). Some consider this particularly helpful for new, especially young shooters, as it leaves them free to focus on more important matters to learn. The “64 series” has sold under [combination of manufacturers’ names listed above] [62, 64 and 954] [one or more letters]. It was also sold as Sears Roebuck & Co. Model 6C. Although often unexpressed in speech, as a “64” it is almost always followed by a single series letter. “64” without a letter indicates the first year of manufacturer only. That version had a plastic magazine. It is considered undesirable. It was followed by the 64B. The rifle is in active production, replacement parts are readily available, and there is a high degree of interchangeability between series. Type Semi-automatic rifle Specifications Weight (2.26 kg) (5 lb) Length (1016 mm) (40 in) Barrel length 21″ Cartridge .22 long rifle Action blowback, self-loading Rate of fire Semi-automatic Muzzle velocity 380 m/s (1,260ft/s) Effective firing range (150 m) (163 yd) Feed system 10-round detachable box magazine Sights Adjustable notched rear sight, bead post front sights, optional fiber optic sights
categories:Sporting GoodsGuns
18304 impressions
702 views
Moncton, NB1 day ago
Photo of Barrels, Barrels, Barrels,  Winchester, Remington, Browning BSA , Marlin, UPDATED LIST
$1234
Barrels, Barrels, Barrels,  Winchester, Remington, Browning BSA , Marlin, UPDATED LIST
Barrels, Barrels, Barrels,  Winchester, Remington, Browning BSA , Marlin, Ect.       Winchester Mod. 61 .22 LR Smooth Bore for shot shells SOLD   Browning Mod. BL22 .22 Cal.   Winchester Mod 61 .22 Cal   Cooey Mod 75 .22 Cal barreled action   Winchester Mod 94 Ranger 30-30 Cal   Cooey Mod.64 A .22 Cal   Voere .22 barreled action   Winchester Mod.100 .308 Barreled action   Remington Mod 12 .22 barreled action   Marlin Mod. 55 Goose Gun  12 Ga.   CIL .22 barrel   Winchester Mod 150 >22 barreled action with forend   BSA heavy barrel 222 Rem.   Winchester Mod. 190 ,.22 barreled action   Winchester Mod 94 Ranger 30-30 barreled action   Lee Enfield SMLE No. 1 Mk. III BSA .303   Ruger .204 22” Savage 1899 .303 Sav. With forend 26” 300 H & H Magnum heavy barrel 31” 2-12 ga BSA barrels in the white 30” 2-12 ga barrels in the white 28” More barrels coming soon…….     Used condition,       Additional pictures upon request     Only reasonable offers are considered. Low ball offers will not be responded to. On final purchase you have accepted full responsibility for the item.  E-transfer or cash only. shipping & insurance are extra, Tracking number will be provided, or pickup in Winnipeg I require your full name, PAL , date of birth and email address for license verification for firearms, ammunition, barrels and magazines.       $100-$150    
categories:Sporting GoodsGuns
15905 impressions
736 views
Winnipeg, MB1 day ago
Photo of Vintage 1976 Technics SL-23 Belt Drive Semi-Automatic Turntable Near Mint
$400
Vintage 1976 Technics SL-23 Belt Drive Semi-Automatic Turntable Near Mint
Near mint condition, would be mint but there are the usual light scratches here and there on the dust cover, although very minimal. This turntable was last serviced 2 years ago with a new belt installed at that time. Recently cleaned the pitch control pots with Deoxit, keeps speed perfectly. Primary use of this turntable back in the day was to transfer vinyl records over to cassette tape. Approx 75 records were transferred then it was stored until now. Not a whole lot of use on the player. Comes with a Shure M91ED MM cartridge and stylus. You would be hard pressed to find another SL-23 in this condition. Description (courtesy of vinylengine) The Technics SL-23 is a high-quality, belt-driven turntable with a newly developed FG (frequency generator) servo-controlled DC motor with IC. The unit features fabulous wow, flutter and rumble rating and has low power consumption for greater efficiency. The static-balanced, S-shaped tonearm has the benefit of automatic return/shut-off, and has a MM cartridge combined with the head shell for high compliance support and good channel separation. Specifications (courtesy of vinylengine) Type: frequency generator servo turntable Drive method: belt drive Motor: DC motor Turntable platter: aluminum diecast 300mm Speeds: 33 and 45rpm Speed change: electronic Pitch control: 6% Wow and flutter: 0.05% WRMS Rumble: -65dB Tonearm: universal s-shaped tubular arm Effective length: 220mm Overhang: 14mm Offset angle: 22 degrees Stylus pressure range: 0 to 4g Cartridge weight range: 3 to 8.5g Dimensions: 135 x 428 x 348mm Weight: 6.5kg
categories:Household ItemsElectronics
1211 impressions
105 views
Edmonton, AB2 days ago
Showing 21 of 196 records
Location
Search within
of
Categories

Other
Medical Equipment

Transportation options

Local Pickup177Can Deliver19Can Ship61