Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4500
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:Sporting GoodsGuns
25603 impressions
891 views
Calgary, AB4 days ago
Photo of Rare Mint 1985 Sony FH-5 Compact High Density Component System *Read
$400
Rare Mint 1985 Sony FH-5 Compact High Density Component System *Read
Cosmetically this unit is in mint condition, I would say it’s a 9.5/10. Priced to sell. These sell for crazy money, working or not. This hefty “Boombox” is actually comprised of 3 separate components held together by metal brackets and 2 detachable speakers. The heavy duty handle is removeable. Weighs 30lbs without batteries! Runs on AC or optional 10 X D cell batteries. Has 3 sets of RCA inputs, 1 is a dedicated phono input (built in MM pre-amp) and 2 are for a CD player, etc. The sound that pumps out of this thing is nuts. Components have had all the switches and pots cleaned with DeoxIT. Tested and everything besides the tape deck is working as it should. Also tested with a turntable. *Note: The tape deck is not functioning. Just had the belts replaced professionally and they noticed that one of the idler wheel assemblies has an issue. They tried to correct the problem, and it worked for a few days, then stopped working properly. Brought it back to them and they told me that it would need to be replaced. They could not find a replacement. Individual Components: TC-58 Tape Deck - Auto-reverse playback, automatic recording level, auto play and automatic sensor. ST-58 Tuner – AM/FM stereo with telescopic antenna and inputs for optional external antenna’s TA-58 Integrated Stereo Amplifier – 2 X 25 W into 8 ohm speakers on AC power or 2 X 3.5 W on battery power. Phono input plus 2 more RCA inputs. Built in 5 band graphic equalizer. APM-058 Speakers – 3-Way super wide speaker system, 4 ohm, 25W (nom) 50W (peak)
categories:Household ItemsElectronics
1052 impressions
148 views
Edmonton, AB3 hours ago
Photo of French 1892 Service Revolver in like new condition, Antique Status $4300
$4300
French 1892 Service Revolver in like new condition, Antique Status $4300
Please text anytime 6476871484. Fully functional double action revolver in perfect restored like new condition. No PAL required. Ammo is available but sold separately. This one can soot 3 factory loaded modern types of ammo including original 8mm, 7.5mm Nagant and 32S&W Tested with smokeless powder. Comes with FRT paperwork. French Model 1892 Service Revolver in 8mm lebel caliber, 4.5" barrel, 6 shot. Very well built and robust . Fiocchi manufacturers modern 8mm ammo as well. The action functions excellent in single and double action. Timing and lockup are good. Bore and cylinder walls are very good . Exterior is professionally nickeled . Grips are replaced with new weather resistant ones , lanyard ring is undamaged. Made in 1897. S/N 2167 The Model 1892 revolver (also known as the "Lebel revolver" and the "St. Etienne 8mm") is a French service revolver produced by Manufacture d'armes de Saint-Étienne as a replacement for the MAS 1873 revolver. It was the standard issue sidearm for officers in the French military during the First World War. The Modèle 1892 revolver is a solid frame revolver with the cylinder on a separate frame swinging right for manual reloading. The Modèle 1892 was first fielded in 1893 and was prominent among French military officers during First World War, and later the French police until the mid-1960s.
categories:Sporting GoodsGuns
21350 impressions
1308 views
Mississauga, ON5 days ago
Photo of Lyman all-american press "turret" 4 stations vintage 60's
175$
Lyman all-american press "turret" 4 stations vintage 60's
Lyman all-american press "turret" 4 stations, come with 6 J shell holder. Grandpa wrote his driver license on the side station turret. Can be remove with dremel or sand paper. Excellent condition, saw more dust than work. Grandpa It exist a Lyman J to X shell holder adapter for modern shell holder available at Gotenda. Shipping fee on your side but it heavy weight. What you can do with J type shell holder included with the press. Info from Lyman shell holder chart #2 22-250 243 winchester 6mm remington 25-20  25-06 Remington  250-3000 Savage  6.5 Creedmoor  260 Remington 6.5x57 Mauser  270 winchester 7mm/08 Remington  7x57 Mauser  7x64 Brenneke 280 Rem (7mm Express)  300 Savage  308 Winchester  30-06  7.65 Argentine Mauser 8x57 Mauser  8x57 JS  7.9x57  35 remington 358 Winchester  35 Whelen  9.3mm x 62 401 winchester sl 45 ACP/.45 Win Mag 475 Wildey #6 7-30 Waters 30-30 winchester 307 winchester 32 Winchester Special  356 winchester 375 Winchester  38-55 Winchester #7 303 british 44 Mag/Spl/.44 Russian 460 S&W  50 Action Express #12 30 Luger  30 Mauser  38 Super Auto  9mm Luger  9 x 23mm 9mm Makarov  41 Action Express #13 7mm Remington Mag  7mm Weatherby Mag  7mm STW  7mm Rem. Ultra Mag. 300 Winchester Mag  300 Remington Ultra Mag.  300 Remington Ultra Mag SA  300 Weatherby Mag  8mm Remington Mag 338 Winchester Mag  338 Remington Ultra Mag. 375 Ruger 375 H&H Magnum  375 Rem. Ultra Mag.  450 marlin #19 22 Spitfire 5.7 Spitfire MMJ-5.7mm 22 R2 Lovell 25-20 Single Shot 30 M-1 Carbine 32 Auto-(6.5mm Auto). 
categories:Sporting Goods
12875 impressions
183 views
Victoriaville, QC5 days ago
Photo of Hornady and RCBS Shell plates, little dandy rotors, deburring tools, pilot neck reamer
$60
Hornady and RCBS Shell plates, little dandy rotors, deburring tools, pilot neck reamer
Selling a variety of Hornady and RCBS SHELL PLATES. Can use regular letter mail for cheaper shipping. HORNADY SHELL PLATES lock-n-load AP. $60 each plus shipping. Shell plate #2 - 219 Zipper, 22 Savage, 25-35 Winchester, 30-30 Winchester, 30 Herrett, 32 Winchester Special, 32-40 Winchester, 375 Winchester, 38-55 Winchester, 7x30 Waters, 7.5x55 Swiss Shell plate #4 - 220 Swift, 225 Winchester, 6.5 JDJ, 7mm Merrill, 30mm Merrill Shell plate #13 - 9.3x74R, 7x57R, 7x65R, and others Shell plate #29 - SOLD Shell plate #35 - SOLD RCBS SHELL PLATES $60 per Shell plate Shell plate # 4 - 257 Weatherby Mag, 264 Win Mag, 6.5mm Rem Mag, 270 Weatherby Mag, 7mm Rem Mag, 7mm STW, 7mm Weatherby Mag, 30-338 Win Mag, 300 H&H Mag, 300 Weatherby Mag, 300 Win Mag, 308 Norma Mag, 8mm Remignton Mag, 338 Win Mag, 340 Weatherby Mag, 350 Rem Mag, 358 Norma Mag, 9.3x74R, 375 H&H Mag, 375 Ruger, 416 Remington Mag, 450 Marlin, 458 Win Mag, 458 Lott, 460 S&W Shell plate #6 - .22 Remington Jet, 5.6mm x 50 Rimmed, .357 Magnum, .357 Remington Maximum, .38 Smith & Wesson, .38 Special Shell plate #10 - .17 Remington, .17 Remington Fireball, 204 Ruger, .221 Remington Fireball, .222 Remington, .222 Remington Magnum ,.223 Remington (5.56mm), 6mm x 45, 7mm Thompson/Center Ugalde, .300 AAC Blackout , .380 Auto Pistol, 9mm x 18 Ultra Shell plate #16 - .30 Luger (7.65mm Luger), 30 Mauser (7.63 Mauser), .356 TSW, 9mm FAR, 9mm Luger, 9mm Makarov, 9mm x 21 9mm x 23 Winchester Shell plate #18 - 44 Magnum, .44 Special RCBS Little dandy rotor #8 $15 RCBS Little dandy rotor #23 $15 Flash hole deburring tool 6mm caliber $15 Pilot neck reamer .20 cal $10
categories:Sporting GoodsGuns
122141 impressions
4614 views
Thunder Bay, ON2 days ago
Photo of Polycarbonate Twinwall Sheets (clear, 8mm)
$96
Polycarbonate Twinwall Sheets (clear, 8mm)
"ClearCO" branded 8mm twinwall polycarbonate sheet from Greenhouse Plastics is suitable for greenhouses, solariums, gazebos, covered walkways, window glazing and other farming and gardening applications. Polycarbonate sheeting is lightweight and installation is easy. The material is UV protected and warranted for 15 years. We offer: Delivery to Nanaimo and Sooke BC for a fee but we ship across BC with Ace Courier. We custom cut; small jobs are free, large jobs have a small charge. Happy to help! Call or text 250 888 9982 any time to discuss assembly details and construction techniques. Please leave a msg. or text after typical working hours for fastest reply. Visit our shop by appointment at #14-4970 Polkey Road in Duncan BC. We will help load and secure your vehicle but please bring your tie-downs. We have red "flags" too. Pricing sample for 2024: 1 x ClearCO 8mm Polycarbonate Twinwall, CLEAR, 4x8, 32sq. ft. = $96ea. (Approx. 9.6lbs) 1 x ClearCO 8mm Polycarbonate Twinwall, CLEAR 4x10, 40sq. ft. = $124ea. (Approx. 11lbs) 1 x ClearCO 8mm Polycarbonate Twinwall, CLEAR, 4x12, 48sq. ft. = $148ea. (Approx. 13lbs) 1 x ClearCO 8mm Polycarbonate Twinwall, CLEAR, 4x16, 64sq. ft. = $208 (Approx. 19lbs) 1 x 12ft. length H channel sheet joiner, $24ea. 1 x 12ft. length H channel sheet joiner, $36ea. 1 x 16ft. length H channel sheet joiner, $48ea. 1 x 12ft. length U channel end cap, $16ea. +taxes (Freight charges will apply to non-Vancouver Island locations. Feel free to arrange your own shipping/pickups). ClearCO has an industrial building in Duncan BC and has been in business since 1990. Thank-you.
categories:Household ItemsHome Improvement
2495 impressions
832 views
Victoria, BC1 week ago
Photo of Brand New G&G SGR556 (G3 System) AEG $720
$720
Brand New G&G SGR556 (G3 System) AEG $720
The G&G SGR556 is a high-performance airsoft rifle designed for players who demand power, accuracy, and versatility on the battlefield. This rifle is based on a popular platform, with a durable and reliable construction that can withstand intense gameplay. The SGR556 features a full metal receiver and outer barrel, giving it a sturdy and realistic feel. It has a modular design, with a M-LOK handguard that allows players to add accessories such as grips, lights, and lasers to customize the rifle to their preferences. The SGR556 also features flip-up front and rear iron sights for improved accuracy, and a removable carrying handle for mounting optics. The SGR556 utilizes the G3 system, which means that it has a full metal gearbox with 8mm bearings for reliable and consistent performance. It also includes an adjustable hop-up system for increased accuracy. In terms of power, the SGR556 boasts an impressive muzzle velocity of 400-410 fps with 0.20g BBs, making it a formidable weapon on the battlefield. It’s also compatible with a wide range of battery types, including 7.4V and 11.1V LiPo batteries (not included). Overall, the G&G SGR556 is a top-of-the-line airsoft rifle that combines power, accuracy, and versatility in a sleek and durable package. Whether you’re a seasoned airsoft player or just starting out, the SGR556 is a weapon that you can rely on to dominate on the field. The G3 system ensures that you’ll have a reliable and consistent performance every time you use it. Product Specifications: System: Electric Caliber: 6mm Magazine Capacity: 450 rounds Hicap Muzzle Velocity: 400-410 fps (with 0.20g BBs) Inner Barrel Length: 275 mm Battery Type: 7.4V/11.1V LiPo (not included) Hop-Up: Adjustable Gearbox: Full metal with 8mm bearings Length: 900 mm Weight: Approx 3.5 kg Outer Barrel Material: Metal Receiver Material: Metal Handguard: M-LOK Front and Rear Iron Sights: Flip-up and adjustable G3 system
categories:Paintball and Airsoft
9937 impressions
849 views
Calgary, AB1 week ago
Photo of Various Rifle Casings and projectiles
$1234
Various Rifle Casings and projectiles
Caliber                  Case Qty              Extended            Description 22-250                 36                           $18.00                 Once fired cases mixed 22-250                 35                           $21.00                 New 22-250                 1                             $35.00                 20 Rem 55G PSP Box 224                        9                             $5.00                   Once fired cases mixed 250 Sav                59                           $29.50                 Once fired cases mixed 280                        22                           $11.00                 Once fired cases mixed 280                        65                           $65.00                 Rem 280- 165G SPCL 300 BLK                25                           $10.00                 Once fired cases mixed 300 Win Mag     5                             $2.00                   Once fired cases mixed 30-06                    175                        $90.00                 Once fired cases mixed 303 British           100                        $40.00                 Once fired cases mixed 308                        22                           $11.00                 Nickel once fired cases 308                        250                        $100.00              Once fired cases mixed 45-70                    5                             $2.50                   Once fired cases mixed - Nickel 45-70                    8                             $4.00                   Once fired cases mixed 6mm                     30                           $24.00                 Once fired cases mixed 8mm Mauser     50                           $25.00                 Once fired cases mixed
categories:Sporting GoodsGuns
2312 impressions
109 views
Winnipeg, MB2 weeks ago
Showing 21 of 65 records
Location
Search within
of
Categories

Other2

Medical Equipment

Transportation options

Local Pickup61Can Deliver4Can Ship26