Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4500
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:Sporting GoodsGuns
15743 impressions
614 views
Calgary, AB1 day ago
Photo of Winchester 1894 & (pre 64) Model 94 - Sights, Parts, ......
$40.00
Winchester 1894 & (pre 64) Model 94 - Sights, Parts, ......
1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads
categories:Sporting GoodsGuns
120934 impressions
7610 views
Lacombe, AB1 day ago
Photo of Ibanez 80W Troubadour T80N-N Acoustic Guitar Amplifier
$250
Ibanez 80W Troubadour T80N-N Acoustic Guitar Amplifier
The Ibanez T80N-N Troubadour is an 80-watt, two-channel, light weight and compact acoustic amplifier with a 10-inch speaker and a piezo tweeter. Key features include independent controls for each channel, a mute switch, a notch filter, chorus, reverb, and a built-in AUX input for playback. It also includes a headphone jack for private practice and a closed-back cabinet with a tilt-up system for better sound projection. This combo amp is in excellent condition, the only thing wrong with it is it is missing the 'mute' button cap. The mute button still functions normally without it. The amp is about 12 years old and wasn't used that much. Save big! Priced to sell. FEATURES: Mic Input with Phantom Power: Features 2 channels, both equipped with selectable guitar and mic inputs. Phantom power is available for both mic inputs. A DSP based preamp offers cleaner sounds and a higher overall sonic quality. Notch Filter: Feature a notch filter as well the ability to invert the phase of your signal to avoid feedback. In addition it also features a mute function which is applicable for both channels at the same time. Chorus, Reverb: Chorus - for producing natural, beautiful tones as well as reverb for a wider variety of sound options. CD/AUX: CD/AUX input which can be used to connect a CD or digital audio player making jamming along to backing tracks a snap. - Manufacturer: Ibanez - Weight (kg): 9 - Power Output (Watt): 80 - Number of Channels: 2 - Speakers: 1x10" - Output: XLR - Reverb: Yes - Integrated Effects Processor: Yes - Effects loop: No - Microphone Input: Yes, XLR - Headphone Connection: 3.5mm - AUX Input: Yes - Battery Operation: No - Foot Switch Connection: Yes Located in Castle Downs, Edmonton. We may be able to deliver depending where you are located.
categories:Household ItemsInstruments
635 impressions
40 views
Edmonton, AB2 days ago
Photo of Wedding flowers - Custom made for Moody theme
$850
Wedding flowers - Custom made for Moody theme
Wedding flowers - Custom made for Moody theme $850 for flowers obo, or $1,000 for the wedding lot (itemized in the last picture) obo. 1 Head table flower arrangement (6ft long x 6in wide x 6in high - uses 5 candles). 2 Head table lantern/flower arrangements (each ft sq x 18in long, cascading over table edge – uses 2 lanterns & 2 candles). 9 Large flower arrangements (each 2ft round x 8in high – uses 3 candles per) 2 small cake and welcome table arrangements (each 12in round x 6in high – uses I candle per arrangement) 7 additional lanterns (each 6in sq x12in high, 9 in total) with flower accents (each 14in long x 8 in high). 6 flower & vine accents, used for acrylic signs (each 16in wide x 4in high). 4 flower accents, used for large signs (each 14in long x 8 in high). 1 small flower arrangement with lighted crystal holder for memorial table (6in round). 40 flickering flameless real wax candles with remotes (various sizes.   Also available: 41 kraft paper wine bags with clear window. 1 hello sign (12in wide x 4in high). 1 love is sweet sign (3 pieces total 23in wide x 4in high). 1 Mr & Mrs sign (3 pieces total 17in wide x 4in). 6 acrylic sign holders (each 8in wide x 11.5in high). 50 black kraft bags (each 8in wide x 10 in high). 4 large sign stands (each 65in high, adjustable) 1 set cake knife/server set (black) 101 tea lights (79 small with black sleeves (removeable), 10 tall with black sleeves (removeable), 12 small no sleeves). 24 red tea lights (not used). 5 satin wine-red table runners (each 6 ft long x 6 in wide). 95 satin wine-red dinner napkins (each 16in sq). 150 wine-red chair sashes (fits standard chair).
categories:Household Items
253 impressions
33 views
Spruce Grove, AB2 days ago
Photo of Lyman all-american press "turret" 4 stations vintage 60's
175$
Lyman all-american press "turret" 4 stations vintage 60's
Lyman all-american press "turret" 4 stations, come with 6 J shell holder. Grandpa wrote his driver license on the side station turret. Can be remove with dremel or sand paper. Excellent condition, saw more dust than work. Grandpa It exist a Lyman J to X shell holder adapter for modern shell holder available at Gotenda. Shipping fee on your side but it heavy weight. What you can do with J type shell holder included with the press. Info from Lyman shell holder chart #2 22-250 243 winchester 6mm remington 25-20  25-06 Remington  250-3000 Savage  6.5 Creedmoor  260 Remington 6.5x57 Mauser  270 winchester 7mm/08 Remington  7x57 Mauser  7x64 Brenneke 280 Rem (7mm Express)  300 Savage  308 Winchester  30-06  7.65 Argentine Mauser 8x57 Mauser  8x57 JS  7.9x57  35 remington 358 Winchester  35 Whelen  9.3mm x 62 401 winchester sl 45 ACP/.45 Win Mag 475 Wildey #6 7-30 Waters 30-30 winchester 307 winchester 32 Winchester Special  356 winchester 375 Winchester  38-55 Winchester #7 303 british 44 Mag/Spl/.44 Russian 460 S&W  50 Action Express #12 30 Luger  30 Mauser  38 Super Auto  9mm Luger  9 x 23mm 9mm Makarov  41 Action Express #13 7mm Remington Mag  7mm Weatherby Mag  7mm STW  7mm Rem. Ultra Mag. 300 Winchester Mag  300 Remington Ultra Mag.  300 Remington Ultra Mag SA  300 Weatherby Mag  8mm Remington Mag 338 Winchester Mag  338 Remington Ultra Mag. 375 Ruger 375 H&H Magnum  375 Rem. Ultra Mag.  450 marlin #19 22 Spitfire 5.7 Spitfire MMJ-5.7mm 22 R2 Lovell 25-20 Single Shot 30 M-1 Carbine 32 Auto-(6.5mm Auto). 
categories:Sporting Goods
6019 impressions
120 views
Victoriaville, QC3 days ago
Showing 21 of 188 records
Location
Search within
of
Categories

Other9

Medical Equipment1

Transportation options

Local Pickup170Can Deliver25Can Ship50