Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25623 impressions

891 views

For Sale - Lee Precision 44 Russian Full Length Carbide Sizing 3 Die - no crimp die included $90 – firm! Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box The resizing die is carbide and is self lubricating, there is no need for resizing lube when resizing your casings with this die set. EMT or cash - Pick up available by appointment only, house drop box or shipped at buyers expense via CP within Canada only. Small package/tracked to all provinces - $22 (small box) Text or email only. No trades or offers If this ad is still up then item is available.

categories:Sporting GoodsGuns

9591 impressions

949 views

Ruger No. 1,  7MM STW (Shooting Times Westerner)   Ruger No. 1,  7MM STW (Shooting Times Westerner) Ser. No. 132-155XX Mod. 01305 Mfg. 1981 26” Barrel   The 7mm STW (Shooting Times Westerner) is a powerful, flat-shooting rifle cartridge designed by Layne Simpson in 1979. Derived from necking down the 8mm Remington Magnum case for high velocities, ideal for long-range big game hunting in open country, propelling 140-175 grain bullets at speeds often exceeding the 7mm Rem Mag and Weatherby Magnums.  Known for excellent ballistics, it requires a long-action rifle and offers significant energy and minimal wind drift, making it a favorite for hunters seeking extreme range performance.        Nice used condition, perfect bore, in 7mm STW comes with Ruger rings Additional pictures upon request       Only reasonable offers are considered. Low ball offers will not be responded to. On final purchase you have accepted full responsibility for the item.  E-transfer or cash only. shipping & insurance are extra, Tracking number will be provided, or pickup in Winnipeg I require your full name, PAL , date of birth and email address for license verification for firearms, ammunition, barrels and magazines.       $2,150

categories:Sporting GoodsGuns

7317 impressions

326 views

Please text anytime 6476871484. .22 BB Cap (Bulleted Breech Cap) also known as the 6mm Flobert, is a variety of .22 caliber rimfire ammunition. Invented by Louis-Nicolas Flobert in 1845, it was the first rimfire metallic cartridge. The .22 BB Cap and .22 CB Cap are interchangeable and are quiet. Place of origin France Designer Louis-Nicolas Flobert Designed 1845 Specifications Parent case tapered percussion cap Bullet diameter .222 in (5.6 mm) Neck diameter .224 in (5.7 mm) Base diameter .224 in (5.7 mm) Rim diameter .270 in (6.9 mm) Rim thickness .040 in (1.0 mm) Case length .284 in (7.2 mm) Overall length .343 in (8.7 mm) Primer type Rimfire Ballistic performance Bullet mass/type Velocity Energy 18 gr (1 g) rn 780 ft/s (240 m/s) 24 ft⋅lbf (33 J) Highly accurate bullets with a new design: • Manufactured from precision, graphite-coated lead slug • Consistently precise bullet shape down to one hundredth of a millimetre • Precise bullet weight within a tolerance of ± 0.02 g | Superior loading: • Minimum differences in bullet speed • Exact primer dose within ± 0.002 g • Propellants within ± 0.01 g | Cartridges in this series achieve excellent accuracy due to new manufacturing technology.

categories:Sporting GoodsGuns

45213 impressions

4191 views

Please text anytime 6476871484. New in original case. No PAL required. Non-lethal self-defense semiautomatic 5 round handgun have been vetted by Government Agencies, Police Forces and Private Security Agencies worldwide. Comes with: 1. Carrying case. 2. Spare 5 round magazine. 3. 12g Co2 power cartridges x 2 4. 5 training powder , 5 plastic , 5 eco-kinetic, 5 rubber and 5 full metal bullets. 25 projectiles total included. This Gun is a non-lethal self-defense weapon that uses compressed CO2 to fire projectiles at high velocity. The LE (Law Enforcement ) model shoots .68 caliber round kinetic and chemical irritant projectiles ( only inert powder can be legally used in Canada) that can disable a threat from up to 80-feet away. The projectiles can be rubber-steel, plastic , inert powder, or kinetic impact aluminum projectiles, depending on the situation. The .68 caliber projectiles can be filled with a powerful chemical irritant that bursts upon impact and disperses a cloud of powerful pepper and tear gas powder (Not in Canada). The LE version is manufactured using glass-reinforced polymers and aircraft grade aluminum.

categories:Sporting GoodsGuns

12615 impressions

1970 views

Selling .38 rimfire ammunition from estate sale. Cartidges were stored in case, bullet facing down. 5 for $16 or buy all 55 pieces as a lot for $175 OBO Will Ship

categories:Sporting GoodsGuns

12868 impressions

909 views

For Sale - Lee Precision 9mm Luger Full Length Carbide Sizing 3 Die - no crimp die included $90 - firm 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant The resizing die is carbide and is self lubricating, there is no need for resizing lube when resizing your casings with this die set. EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense. Small package/tracked, all provinces - $22 via Canada Post Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available

categories:Sporting GoodsGuns

16742 impressions

589 views

I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Cheers, Cody

categories:Sporting GoodsGuns

4577 impressions

223 views

P.C.I. Ammo 401 WINCHESTER SELF LOADER 200gr 20 rounds supplied in plastic slip top case AKA : 401 WSL or 401 WINCHESTER SL Made with QUALITY CARTRIDGE new brass head stamped 401WSL Made with a 200 gr RN-FMJ bullet sized 0.406" SMOKELESS Approx. 1900 f.p.s. - Factory vintage duplicate load

categories:Guns

7898 impressions

793 views

P.C.I. 8MM-06 SPEER 170gr SEMI-SPITZER SOFT POINT Box of 20 rounds – Made with new reformed NOSLER 30-06 brass cases Loaded with SPEER 170gr Semi-Spitzer Soft Point 0.323″ hunting bullets Approximately 2525 f.p.s.

categories:Sporting GoodsGuns

4948 impressions

430 views

P.C.I. 8MM-06 Nosler 180gr BALLISTIC TIP SPITZER Box of 20 rounds – Made with new reformed NOSLER 30-06 brass cases Loaded with NOSLER 180gr BALLISTIC TIP SPITZER 0.323″ hunting bullets Approximately 2550 f.p.s.

categories:Sporting GoodsGuns

5199 impressions

402 views

P.C.I. Ammo 45 AUTO-RIM 200gr RNFP – Box 50 rounds These are Black Powder loaded rounds suitable for good condition antiques Made with new STARLINE 45 AUTO-RIM brass cases Cast Lead 200gr RNFP bullet sized 0.452″ wax lubed 12 BNH Black Powder Load Approx. 750 f.p.s.

categories:Guns

13231 impressions

952 views

Hornady Lock-N-Load Ammo Plant Kit NEW LOWER PRICE - $1600.00 for complete system THIS PROGRESSIVE PRESS KIT IS LIKE NEW, it was mounted but never used ever. NOTE: This kit is missing the Case feed and Bullet Feed Hoppers. Parts & mounting arms are included. Additional items included (Over $750 value): 5 Lock-N-Load bushings (Total of 15 included) Case Activated Powder Drop Lower Assembly Shell Plates- #8, #45, #10 & #6 Bullet Feed dies for 38/357, 40/10mm, 380/9mm & 451/452 & MORE …. Everything in the photos is included.

categories:Sporting GoodsGuns

2991 impressions

572 views

P.C.I. AMMO 45 SCHOFIELD 250gr RNFP-Poly BLACK POWDER These are Black Powder loaded rounds suitable for good condition antiques Made with new STARLINE 45 SCHOFIELD brass cases Cast Lead 250gr RNFP bullet sized 0.452″ polymer lubed 12 BNH Black Powder Load Approx. 750 f.p.s.

categories:Guns

13667 impressions

1093 views

P.C.I. AMMO 44 S&W RUSSIAN 200gr RNFP SMOKELESS Box 50 rounds These are Smokeless Powder loaded rounds suitable for good condition antiques Made with new STARLINE 44 RUSSIAN brass cases Cast Lead 200gr RNFP bullet sized 0.430″ Polymer coated lubed 12 BNH Smokeless Load Approx. 775 f.p.s.

categories:Guns

15643 impressions

1310 views

P.C.I. Ammo 455 WEBLEY MK II 265gr RNFP – Box 50 rounds These are smokeless powder loaded rounds suitable for good condition firearms Made with new STARLINE 455 MK II brass cases Cast Lead 265gr RNFP bullet sized 0.455″ Polymer lubed 12 BNH Smokeless Powder Load Approx. 675 f.p.s.

categories:Sporting GoodsGuns

8191 impressions

740 views

P.C.I. Ammo 45 COLT 250gr RNFP – Box 50 rounds These are Black Powder loaded rounds suitable for good condition antiques Made with new STARLINE 45 COLT brass cases Cast Lead 250gr RNFP bullet sized 0.452″ wax lubed 12 BNH Black Powder Load Approx. 850 f.p.s.

categories:Guns

15147 impressions

1036 views

P.C.I. Ammo 44 COLT 200gr RNFP – Box 50 rounds These are Black Powder loaded rounds suitable for good condition antiques Made with new STARLINE 44 COLT brass cases Cast Lead 200gr RNFP bullet sized 0.430″ wax lubed 12 BNH Black Powder Load Approx. 775 f.p.s.

categories:Guns

16822 impressions

1234 views

PCI Ammo - 450 ADAMS REVOLVER Black Powder - 50 rounds AKA 450 Boxer Mk I, .450 Revolver, .450 Colt, .450 Short, .450 Corto, and .450 Mark III, and in USA as the .45 Webley These loaded to duplicate the original rounds of black powder loaded with 225gr RN Cast Lead Bullets loaded in custom modified cases

categories:Sporting GoodsGuns

10682 impressions

755 views

Only been used for one half of a season, maybe been shot 20-30 times. Been sitting for 5 years as I stopped hunting for medical reasons. Comes with case and bullet case as seen on pictures.

categories:Other

3626 impressions

366 views

I have two of the R-100 (Green), one of the H-50 (Blue), and on of the J-20 (Grey). $10 each, the grey one is $5. Or all four for $30

categories:Sporting Goods

1635 impressions

281 views