Photo of Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
$1600
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE
Lee Enfield No: 1 Mark III 1938 GR1 Singapore SMTLE . 303 BRITISH 10 round Mag, full wood, swivels, bayonet lug with pig sticker bayonet included, rear brass butt plate with tool kit compartment, 2000m rear adjustable iron sight. Frame and butt stock medallion match. Mag number unreadable. Length: SMLE No. 1 Mk III: 44.57 in (1,132 mm) Barrel length: SMLE No. 1 Mk III: 25.2 in (640 mm) In late 1915 the Mk III* was introduced incorporating several changes, the most prominent of which were the deletion of the magazine cut-off mechanism, which when engaged permits the feeding and extraction of single cartridges only while keeping the cartridges in the magazine in reserve, and the long-range volley sights. The windage adjustment of the rear sight was also dispensed with, and the cocking piece was changed from a round knob to a serrated slab. Rifles with some or all of these features present are found, as the changes were implemented at different times in different factories and as stocks of parts were depleted. The magazine cut-off was reinstated after the First World War ended, and not entirely dispensed with in manufacturing until 1933. The SMLE Mk III* (renamed Rifle No.1 Mk III* in 1926) saw extensive service throughout the Second World War, especially in the North African, Italian, Pacific and Burmese theatres in the hands of British and Commonwealth forces. Australia and India retained and manufactured the SMLE Mk III* as their standard rifle during the conflict, and the rifle remained in Australian military service through the Korean War, until it was replaced by the L1A1 SLR in the late 1950s.The Lithgow Small Arms Factory finally ceased production of the SMLE Mk III* in 1953.
categories:Sporting GoodsGuns
32887 impressions
1319 views
Saskatoon, SK1 day ago
Photo of Swedish Mauser 30.06 1896 Mauser Action  23" barrel 5+1 hinge plate
$425
Swedish Mauser 30.06 1896 Mauser Action 23" barrel 5+1 hinge plate
Swedish Mauser action with Husqvarna barrel in 30.06, Sporter stock in good condition with butt pad cushion, swivel mounts, semi pistol grip with base cap. Knurling is in good condition. Adjustable rear sight for elevation. Overall good condition. Receiver is tapped for scope mount bases. All Swedish Mausers other than trials rifles were chambered for the 6.5×55mm Swedish cartridge, and all Swedish-made actions were proof-tested with a single 6.5×55mm proof round developing approximately 455 MPa (65,992 psi) piezo pressure (55,000 CUP).[4][5] Swedish Mausers were manufactured by Waffenfabrik Mauser AG in Oberndorf a/N in Germany and in Sweden by Carl Gustafs Stads Gevärsfaktori and Husqvarna Vapenfabriks Aktiebolag. All Swedish Mausers, whether built in Germany or Sweden, were fabricated using a Swedish-supplied high grade tool steel alloyed with nickel, copper, and vanadium, a product then noted for its strength and corrosion resistance. These rifles, like other pre-M 98 system Mauser rifles, lack the third safety locking lug at the rear of the bolt and feature "cock-on-closing" (similar to the contemporary Lee–Enfield rifle). CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
36802 impressions
2170 views
Saskatoon, SK1 day ago
Photo of Valmet Jyvaskyla Standard . 22LR Competition single bolt actionValmet Jyvaskyla Standard . 22LR Competition single bolt action
$1200
Valmet Jyvaskyla Standard . 22LR Competition single bolt actionValmet Jyvaskyla Standard . 22LR Competition single bolt action
Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
29354 impressions
1165 views
Saskatoon, SK1 day ago
Photo of SWISS SCHMIDT RUBIN, M1911 CARBINE 7.5mm X 55mm  1931 Manufacture
$1400
SWISS SCHMIDT RUBIN, M1911 CARBINE 7.5mm X 55mm 1931 Manufacture
SWISS SCHMIDT RUBIN MODEL: 1911 CARBINE CALIBER: 7.5 X 55, COMES WITH MAGAZINE, BORE IS VERY GOOD, SHINY. MADE IN 1931, VISIBLE NUMBERS MATCH. BLADE FRONT SIGHT WITH EARS, ADJUSTABLE U NOTCHED REAR SIGHT, BROWN POLYMER BOLT KNOBS, SILVER BOLT. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SWIVELS WITH METAL HOOK FROM SLING ON ONE OF THEM, STACKING HOOK, BAYONET LUG. METAL FINISH SHOWS SOME NORMAL SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW SOME NORMAL SMALL MARKS, SCRATCHES AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 23.25" CLASS: CANADIAN NON RESTRICTED. Excellent Overall Condition An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
27867 impressions
1114 views
Saskatoon, SK1 day ago
Photo of SWISS SCHMIDT RUBIN 1896/11 INFANTRY RIFLE 7.5mm X 55mm Manufactured: 1911-1920
$1160
SWISS SCHMIDT RUBIN 1896/11 INFANTRY RIFLE 7.5mm X 55mm Manufactured: 1911-1920
SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55 Very good original condition 1911-1920 conversion date to M1911. SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55, COMES WITH MUZZLE COVER, BORE IS VERY GOOD. VISIBLE NUMBERS MATCH. BARLEY CORN FRONT SIGHT WITH RAMP, ADJUSTABLE U NOTCHED REAR SIGHT, SILVER BOLT WITH RED POLYMER BOLT KNOBS. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, MILITARY MODIFIED PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SLING SWIVELS, STACKING HOOK, BAYONET LUG. METAL FINISH TURNING SILVER GREY WITH LIGHT PITTING, SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW DINGS, MARKS AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 30.75", CLASS: CANADIAN NON RESTRICTED. The Schmidt–Rubin rifles were a series of Swiss Army service rifles in use between 1889 and 1958. They are distinguished by the straight-pull bolt action invented by Rudolf Schmidt and use Eduard Rubin's GP90 7.5×53.5 and GP11 7.5×55 Schmidt–Rubin rifle cartridge. The Schmidt–Rubin 1896/11 rifle, or the Model 96/11, was a Swiss upgrade to the 89/96 rifles they had, to use the more powerful cartridge adopted as the GP11. The GP11 cartridge operated at a higher chamber pressure, which the 89/96 action could easily handle. The model 89/96 rifles were modernized by changing the three-groove rifled barrel to a new 4-groove type, adding a pistol grip to the stock, changing the magazine to the 6-round type used in the 1900 short rifle, and modernizing the sights. This also streamlined the appearance of the rifles. Because more rifles were needed than were available, the model 1911 rifle, with slight changes, was put into production. Almost all of the 127,000-plus model 89/96 rifles were converted to the 96/11 specifications. An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
26106 impressions
1064 views
Saskatoon, SK1 day ago
Photo of WW2 Arisaka-Carcano Type I Rifle
$1400
WW2 Arisaka-Carcano Type I Rifle
Hello I'm selling a Arisaka-Carcano Type I Rifle, it is Italian made for the Japanese Imperial Navy for WW2. This is a combination of the Carcano 1891 and a Type 38. It has the action and barrel of a Carcano and it is chambered in 6.5 Jap, has the 2 piece stock, 5 round internal magazine, and the sighting system of the early Type 38. The bolt and receiver has markings from Fabbrica Nazionale d'Armi - Brescia, this is the more uncommon version accounting for roughly only a quarter of production with total estimates from 60k-130k across all factories. Two types of Type I buttstocks were made, the short and long version and this rifle is the long buttstock version. The bolt on the Type I cannot be swapped with a Carcano and vice versa as the Type I bolt has a slightly different location cut for the ejector. The exterior metal has some surface wear and some light surface rust with the buttplate being the most worn. The internals and bore are in good condition with good rifling as shown in the images and the bullet test, the bullet I used was the 6.5 Jap Norma Factory ammo. It is missing the cleaning rod and ejector, luckily the ejector is readily avaliable in parts stores such as Numrich. The rifle has a hidden duffle cut under the front barrel band, the previous owner repaired the duffle cut by putting a small wooden dowel in the cleaning rod hole and glueing the 2 pieces together. The glue has come loose and would need to be re-glued. The rifle shoots well using 0.264 Speer bullet handloads at 25M with all the shots landing well without any keyholeing. If you have any questions or request more pictures let me know and and I would be happy to help. Can meetup in the GTA for local sales. $1400 plus shipping, thank you for looking.
categories:Sporting GoodsGuns
494 impressions
36 views
Toronto, ON1 day ago
Showing 21 of 182 records
Location
Search within
of
Categories

Other
Medical Equipment

Transportation options

Local Pickup167Can Deliver16Can Ship104