SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55 Very good original condition 1911-1920 conversion date to M191 action.. SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55, COMES WITH MUZZLE COVER, BORE IS VERY GOOD. VISIBLE NUMBERS MATCH. BARLEY CORN FRONT SIGHT WITH RAMP, ADJUSTABLE U NOTCHED REAR SIGHT, SILVER BOLT WITH RED POLYMER BOLT KNOBS. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, MILITARY MODIFIED PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SLING SWIVELS, STACKING HOOK, BAYONET LUG. METAL FINISH TURNING SILVER GREY WITH LIGHT PITTING, SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW DINGS, MARKS AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 30.75", CLASS: CANADIAN NON RESTRICTED. The Schmidt–Rubin rifles were a series of Swiss Army service rifles in use between 1889 and 1958. They are distinguished by the straight-pull bolt action invented by Rudolf Schmidt and use Eduard Rubin's GP90 7.5×53.5 and GP11 7.5×55 Schmidt–Rubin rifle cartridge. The Schmidt–Rubin 1896/11 rifle, or the Model 96/11, was a Swiss upgrade to the 89/96 rifles they had, to use the more powerful cartridge adopted as the GP11. The GP11 cartridge operated at a higher chamber pressure, which the 89/96 action could easily handle. The model 89/96 rifles were modernized by changing the three-groove rifled barrel to a new 4-groove type, adding a pistol grip to the stock, changing the magazine to the 6-round type used in the 1900 short rifle, and modernizing the sights. This also streamlined the appearance of the rifles. Because more rifles were needed than were available, the model 1911 rifle, with slight changes, was put into production. Almost all of the 127,000-plus model 89/96 rifles were converted to the 96/11 specifications. An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

33719 impressions

1476 views

This started out as an LSA Sht LE MK111 showing 1907 as the year of manufacture -  I believe the first year the  MK111 was put into military service. It was then converted to a single shot 410 shot gun in 1934 at the Rifle factory Ishapore in India, where it was also restocked into a full Indian Rosewood wood set. This shotgun is matching bolt, receiver, barrel and wood although the nose cap is blank. All other parts look to be original to either it's 1907 manufacture or it's 1934 conversion.  it's in exceptional condition with only minor scratches and a few marks/chips out of the wood and one armory repair to the butt stock.  I have only fired this shotgun once in all the years i've owned it - it will fire modern 410 cartridges. This is a very nice collectors piece, at nearly 120 years old and 92 years since being converted to a shotgun, it's still one of the best original condition  Lee Enfield's I've ever seen ..... and I've bought and sold many.  The price is firm, I won't be disappointed if it doesn't sell.

categories:Sporting GoodsGuns

3712 impressions

158 views

CERROSAFE INGOT For chamber casting and various other projects 1/2 pound ingot $ 35.00 each 1 pound ingot $65.00 each This alloy has a low melting point, melting between 158º and 190º F, considerably lower than the boiling point of water. It is useful for making reference castings whose dimensions can be correlated to those of the mold or other template due to its well-known thermal expansion properties during cooling. The alloy contracts during the first 30 minutes, allowing easy removal from a mold, then expands during the next 30 minutes to return to the exact original size. It then continues expanding at a known rate for 200 hours, allowing conversion of measurements of the casting back to those of the mold

categories:Sporting GoodsGuns

15883 impressions

1886 views

Turn your three seater into a five seater! Conversion kit, Rear seat, harnesses and roll cage assembly for Polaris Ranger 2012. No rips in the seat.. not bent. Kids have outgrown they have bikes now. Best offers or trades considered. Willing to let you test fitment before buying if you bring your unit. Please text or email only as I live in a bad service area. Scammers don't bother, quit wasting my time, unless you really want to be heckled and ridiculed.

categories:Auto and TrailersUTVs

15185 impressions

1242 views

Turn heads with this stunning vintage Art Deco waterfall cabinet — a true conversation starter that blends bold 1930s style with lasting sophistication. Featuring a dramatic curved-front design, rich wood grain finish, and floral detailing, it’s the perfect storage piece for collectors, stylists, or anyone craving unique character in their space. ✨ Features: - Striking waterfall front design - Warm wood tones - Spacious shelves and deep drawers - Durable craftsmanship with vintage flair Ideal for: - Art Deco enthusiasts - Vintage furniture collectors - Stylish storage in living rooms, dining areas, or foyers This cabinet measures 32" (81.3 cm) high x 16" (40.6 cm) wide x 61" (154.9 cm) deep Priced to move Message or call now to schedule a viewing before it’s gone! 905-984-9344 Person paying will need to pick up and carry away (Local delivery available for $50) Martindale/Fourth area, first come, first served

categories:Household ItemsFurniture

2445 impressions

745 views

The 6.2L LT4 Supercharged V8 engine paired with a 6-speed manual transmission is a complete, ready-to-run performance package designed for serious enthusiasts. Featuring an Eaton TVS R1740 supercharger, the LT4 delivers an exhilarating 650 horsepower and 650 lb-ft of torque, providing instant throttle response and relentless acceleration across the powerband. This engine is renowned for its durability, efficiency, and race-proven engineering. Included with the package is a matched 6-speed manual transmission, offering precise gear engagement and maximum driver control perfect for high-performance street builds, restomods, or track-focused projects. The complete wire harness and programmed ECU are supplied, eliminating guesswork and making installation straightforward. With the computer already calibrated, this setup is truly plug-and-play, allowing you to focus on enjoying the power rather than sorting out electronics. Built with advanced aluminum construction, forged internal components, and high-flow cylinder heads, the LT4 is engineered to handle extreme performance demands while maintaining reliability. Whether installed in a modern muscle car, classic conversion, or custom build, this LT4 supercharged V8 package delivers factory-engineered power, legendary sound, and an unforgettable driving experience.

categories:Auto and TrailersAuto Parts

404 impressions

35 views

Antique Copper Powder Flask Brass powder dispensing mechanism and spout, which works properly Removable brass spout Measures 6 ¾” Long and 3 ½” wide at widest portion No visible makers information The flask is missing solder on the bottom and both sides and needs to be repaired before it could be used. An interesting collector piece, sure to generate lots of conversation. There is something small inside which rattles when shaking the flask.  This may be some of the missing solder or possibly small clumps of powder.   $45.00   Thanks, Phil

categories:Sporting GoodsGuns

3015 impressions

103 views

Hey there, Dillon 9mm Conversion Kit - $75 Price is plus shipping. Thanks for looking!

categories:Sporting GoodsGuns

8366 impressions

580 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

21070 impressions

608 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

20610 impressions

1198 views

Howdy Townpost. I have a really interesting piece for you here. This is a conversion of a conversion rifle. This is a German made Ludwig Loewe Gew 88 that was later converted by the Germans into a Gew 88/05 and most likely given to the Ottomans in WWI as war aid. Many of these were retained and later converted in the 1930's to a Mauser 1935 pattern type rifle. They converted a large portion of their arsenal to this pattern including SMLE's a plethora of their different Mausers, and Gew 88's they had in inventory. This rifle was rebarreled to shoot the modern 8mm Mauser cartridge and re-stocked into a more Mauser-esq stock. This stock features Mauser bolt disassembly disks despite them not being required for the Gew 88 action. The stock on this particular example had a fairly large wood defect that the Turks neglected to address has been fixed. It was cleaned out and filled with Brownells Acraglas epoxy so it's rock solid now. The overall condition is good. The stock was professionally refinished. The bore is excellent, very sharp and clean rifling. The rifle is located in Calgary AB for pickup or I can ship it nationwide on the buyer's dime. PAL will be verified as per C-71

categories:Sporting GoodsGuns

9559 impressions

693 views

Russian SKS with MagWedge conversion. Includes Robinson 10 round XCR mags with extensions x 4. ATI folding stock with Magpul grip. Selling as a package. No trades. Please text. Pending sale

categories:Sporting GoodsGuns

2770 impressions

327 views

Brand new Factory Mossberg 14″ barrel conversion kits for the Mossberg 500/590/590A1 series of shotguns. This kit gives you everything to make your Mossberg shotgun into a short barreled shotgun. All the parts have a parkerized finish. Included 14″ Barrel Tube Nut Magazine Cap Magtube Magazine Spring Retainer Magazine Spring Forearm Action Slide Assembly

categories:Sporting GoodsGuns

7923 impressions

778 views

New 10/22 Archangel quick break-down conversion stock Converts any standard 10/22 including bull barrels into a compact backpack rifle

categories:Sporting GoodsGuns

27415 impressions

2501 views

Dlask Barrel with OEM CZ BREN TRUNION AND GAS BLOCK. This setup is meant to go on a 11 inch 556 Bren 2 MS. This barrel has less than 500 rounds through it. Willing to ship at buyers expense.

categories:Sporting GoodsGuns

5471 impressions

226 views

Torkmag G-Block Conversion Kit Features: Compatible with all Mil Spec AR-15 Lowers No Modification to the lower necessary Duel Block System is held firmly in place with set screws (Included) Use with factory Glock Mags, Torkmag 9mm Magazine and .40 S&W Cal Glock Magazines Pickup GTA Ship on buyer

categories:Sporting GoodsGuns

6512 impressions

229 views

****Pls check other ads of mine for more accessories and guns**** Weaver 26 (48026) base for for Springfield 1911 A-2 SASS conversion Can be shipped in envelop through regular mail. Pickup GTA Ship on buyer

categories:Sporting GoodsGuns

4031 impressions

195 views

Located in NW Edmonton. Framed Lithograph, measures 16 1/2” wide x 19” high. Price $675. Trading Ceremony at York Factory, 1780's By ADAM SHERIFF SCOTT, R.C.A. The arrival of the main body of Indians in the early summer was one of the important events of the year at the posts along the shores of Hudson Bay. Andrew Graham, who was at York Factory for several years, has left us an eye-witness account of the elaborate ceremony that preceded the trading at York when the Indian canoe fleet arrived from the West. After they had landed at the fort and had been duly received by the governor (as the local officer in charge was known), the chief and his lieutenant were dressed up in European clothes and then escorted to the chief's lodge with much pageantry. "In front are the halberts and ensigns," writes Graham, "next to the drummer beating a march; then several of the Factory Servants bearing the bread, and prunes, pipes, brandy, tobacco, and the beaver coats of the chief, which he had on when admitted into the Factory. Then comes the Captain [chief] walking quite erect and stately, smoaking his pipe and conversing with the Governor and his officers; then follow the Lieutenant and perhaps a friend or two who was permitted to come in with the Chief." In the picture, the chief, attired in scarlet, with one red stocking and one blue, is seen walking with the governor in all his finery. The walls of the fort, rising above the palisade, are of squared logs covered with plaster. The red ensign bears the Company's coat-of-arms in the fly. Price $675. Can ship once paid. Located in NW Edmonton. Available 7 days a week. Call or text me 780-803-7501

categories:Household ItemsCollectibles

1807 impressions

218 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. Very smooth action. No PAL required. Comes with RCMP FRT paperwork. Reloadable ammo is available but sold separately. Tested with smokeless powder. This is conversion to British .455 Webley ammo. (available for sale online). but still can shoot original 11mm ammo. It is very interesting example of rarely blued 1873 French Service Revolver that was imported to United Kingdom and converted to .455 Webley caliber which was readily available in England of that time and was considerably more powerful than original 11mm ammo. This one is in excellent original condition, all the markings are sharp and complete. The serial numbers are repeated on all components: the barrel, cylinder, frame, grips, internal mechanism parts and even the screw heads and escutcheons. Everything matches. The bore of the 4 1/2 inch barrel is as perfect and it is mirror bright and the rifling is sharp. The action is excellent and accurate and very smooth, the cylinder indexes and locks properly with no play at all. The walnut grips are excellent and show no damage this one looks like new. SN H48478, this one is made in 1881, rated excellent overall. MAS Mle 1873 French Service Revolver, 11mm French Ordnance The Mle 1873 was France's first double action cartridge revolver. After the disastrous loss to Prussia in the war of 1870, the French military closely examined its armaments and small arms, and they came to the conclusion that a new, more rugged and powerful side arm for their infantry was required. The result was the Mle 1873, designed by the famous partners of Chamelot & Delvigne, whose genius ideas would dominate much of the European military (and commercial) small arms market for decades to come. Many European countries adopted their designs, including Switzerland, Italy, Sweden, Russia and Belgium. Only the Brits and Germans would continue to develop their own side arms.

categories:Sporting GoodsGuns

26133 impressions

2015 views

Please text anytime 6476871484. Brand new 12GA to 410GA - Adapter Precision machined from stainless steel made in the USA This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire 410GA ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell. It will easily fit into your break open shotgun barrel and will accept any 410GA ammunition up to 3" (three inches). After firing simply remove the adapter and tip upside down to remove the spent shell. A smooth bore is gently bored through the adapter. The 410GA cartridge side is precision CNC machined to the exact chamber dimensions to accept 410GA ammunition (SAAMI chamber specifications). Every adapter is laser engraved for easy caliber conversion identification. Adapter orientation is not important and the adapter will work in any position. Will fit any 12GA break open gun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 410GA ammunition. Surprisingly accurate! Not recommended for pump action or semi-auto shotguns. Designed for use with break open style guns only. Any ammunition pictured is for representation purposes only and is not included with this purchase.

categories:Sporting GoodsGuns

23663 impressions

1770 views

Brand new This kit essentially provides a conversion to 590S functionality, but in a more robust design. It contains patent-pending Universal Cartridge Adapter and low-drag no-snag Magazine Follower which allows smooth cycling of 1-3/4" Minishells up to 3" Magnum cartridges in the same magazine. This kit is compatible with any Mossberg 12-Gauge pump-action firearm with a 3" Chamber and machined grooves in the receiver.

categories:Sporting GoodsGuns

5183 impressions

615 views