Brand new in box, limited time price. CSA-2624: 6-24x56 34mm $580 Made in Japan https://www.targettamers.com/rifle-scopes/crimson-trace-csa-2624-review/ One of the Best Long Range Rifle Scopes for the Money in 2022 (Tactical & Hunting) https://scopesreviews.com/best-long-range-rifle-scopes/ - Japanese ED glass clarity - MR1-MOA Advanced Illuminated Reticle - One piece Anodized Aircraft Grade Aluminum Tube - Waterproof, Fog proof, Shockproof - Coated Lenses to Protect from Scratches, Oil, and Debris - Nitrogen purged and O-Ring Sealed No Trades TEXT Only at 4039180828

categories:Sporting GoodsGuns

142215 impressions

12441 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

24721 impressions

860 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

20205 impressions

740 views

Lakefield 64F 22lr Semi-auto Rifle, Black, 40203SAV (minor assembly required) Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Overview Formally known as the Cooey 64, the Winchester-Cooey Model 64B and the Lakefield 64B, the Savage Model 64 series is a semi-automatic .22 LR rifle made by Savage Arms in Lakefield, Ontario, Canada. It operates on a simple blowback action. It is targeted towards beginning shooters, small game hunters, and budget minded plinking. It is one of the most popular plinkers in the United States due to high accuracy, being chambered in cheap, common, and readily available .22 long rifle, and the inexpensive price. It is unusual among semiautomatic 22s, and traditional (non-bullpup) semiautomatic rifles in general, in that it is available in a true left handed version (left handed safety, charging handle and eject -presumably wrong handed twist). Some consider this particularly helpful for new, especially young shooters, as it leaves them free to focus on more important matters to learn. The “64 series” has sold under [combination of manufacturers’ names listed above] [62, 64 and 954] [one or more letters]. It was also sold as Sears Roebuck & Co. Model 6C. Although often unexpressed in speech, as a “64” it is almost always followed by a single series letter. “64” without a letter indicates the first year of manufacturer only. That version had a plastic magazine. It is considered undesirable. It was followed by the 64B. The rifle is in active production, replacement parts are readily available, and there is a high degree of interchangeability between series. Type Semi-automatic rifle Specifications Weight (2.26 kg) (5 lb) Length (1016 mm) (40 in) Barrel length 21″ Cartridge .22 long rifle Action blowback, self-loading Rate of fire Semi-automatic Muzzle velocity 380 m/s (1,260ft/s) Effective firing range (150 m) (163 yd) Feed system 10-round detachable box magazine Sights Adjustable notched rear sight, bead post front sights, optional fiber optic sights

categories:Sporting GoodsGuns

18405 impressions

706 views

Chiappa LA322 TakeDown Lever Action Carbine, 22 lr, 920.383 The lever-action 22LR is an American classic. Chiappa continues this legacy by using modern technology and materials to produce the LA322. This beautiful rimfire is as attractive as it is functional. Accurate, quick handling and rapid shooting, the LA322 embodies all the qualities that Americans want in a lever-action rifle. A 3/8in dovetail is machined into the top of the receiver for optics. Another coveted feature is the take down design for easy transport and storage. SKU: 920.383 EAN: 8053670717282 Type of Gun: Rifle Caliber: 22 Long Rifle Action: Lever-Action Barrel Length: 18.5″ (470 mm) Capacity: 15 Feed In: Magazine Tube Trigger System: Single Stock: English Style Wood Forend: English Style Wood Front Sight: Fixed Tunnel Rear Sight: Adjustable Elevation & Windage Buckhorn Style Safety: Half Cock Hammer Weight: 5.52 lbs Length: 35.5″ (902 mm) Material: Alloy Frame / Steel Barrel Finish: Blued Lever Style: Standard Extraction: Auto Ejection FAMILY OWNED – SINCE 1958 – MADE IN ITALY The History A curious nature, a passion for firearms and a love for challenges have always guided our path at Chiappa Firearms. There will always be another challenge to take on and we’ll not be afraid to play the game. The history of Chiappa Firearms began in 1958, when Ezechiele (Oscar) Chiappa opened his company and called it Armi Sport. Initially an artisanal workshop, the company has grown over the years to become an industrial group, still wholly owned by the Chiappa family. Chiappa includes the companies Chiappa Firearms S.r.l. (defense, sporting and replica firearms), KIMAR (blank and signal guns), ACP (training systems), Costa S.r.l. (surface treatment of metals) and Chiappa Firearms USA, Ltd. (USA’s distribution center). The success story of the Chiappa derives from a combination of factors, among which are a great technical experience matured over 60 years; ability, the courage and entrepreneurial spirit of the President Rino Chiappa, and the total dedication to work of the whole Chiappa family. These capabilities have lead Chiappa to a series of winning choices, focusing on technological advancement, on understanding and meeting the needs of the market while constantly introducing new models, but also offering accuracy and continued support to customers. All stages of production are carried out entirely within the company. The manufacturing process begins with the design of the 3D model, followed by the realization of prototypes and the transfer of data to CNC machines. Through specific CAM software, the machining equipment is able to produce any component in a very short time taking instructions directly from the 3D drawings. Order and organization are common to all factory departments: the workshop with numerical control machines (CNC) for the processing of components machined from solid steel such as receivers and breeches, or for the realization of all types of stocks and other small parts; manufacturing of barrels; die casting and molding of plastic material; ovens and equipment for heat treatment; surface treatment, such as bluing, parkerizing, nickel plating, as well as equipment for grinding and polishing of metal and wood components. The entire manufacturing process is managed and coordinated by a computer system that encompasses all steps of production. This system allows for a thorough control of the execution time, thus keeping production costs tightly monitored. Finally, all firearms are visually inspected and test fired in the shooting range built inside the company before being brought to the packaging area. Thanks to the experience of the personnel, the tradition of artisan craftsmanship cohabits with a modern organization within the same factory, fostering maximum efficiency. Chiappa manufactures a wide range of models. The catalog includes replicas of American historic weapons and muzzleloaders, lever action shotguns and rifles, handguns and rifles in .17 and .22 rimfire, sporting and self defense handguns such as the famous Rhino, signal guns and air guns. As a direct result of the optimization of the manufacturing process, all Chiappa products are an excellent value. Chiappa today is a rapidly developing, constantly evolving corporation. The great capacity to innovate with flexibility and dynamism, the wide range of products and the excellent value for the consumer have allowed Chiappa to spread sales in 60 countries, being fully able to compete with the biggest companies in the world.

categories:Guns

48013 impressions

3804 views

Made in about 1902, a Winchester 1873 lever action rifle in caliber 22 long has a 24 inch barrel, a dark worn bore showing some rifling and has original sights. Works nice as a single shot, inner magazine tube is missing. Metal condition is good with little blue remaining. Stock is very nice with no cracks and original finish. Forend has a crack but is functional. The inner magazine tube is available from time to time but the function as a single shot is perfect.

categories:Sporting GoodsGuns

6048 impressions

946 views

Up for grabs is a very nice Concorde Model 20-22 Long Rifle ONLY Semi Auto Rifle. The unit is in very good shape for its age. Comes with 1 mag, as seen in the photos. The photos pretty well speak for themselves. Any questions, please contact me. $400.00 plus shipping OBO. Located in East Vancouver. Thanks for looking.

categories:Sporting GoodsGuns

972 impressions

74 views

Good, used SKS crate for sale Dimensions: 44.25in x 17.75in x 13.5in (outside). Will fit a 42in long rifle or similar item. Would make a good coffee table. Has two racks inside to hold (5) rifles but more can be made. Missing some paint, some numbers legible on the sides, missing one slat of wood on bottom outside of crate. $50 - cash and carry Pick up only, will not ship

categories:Sporting GoodsGuns

14675 impressions

514 views

This is a brand new Remington 700 Long Range that has shot less than 20 rounds. I only went to the range once when I bought it to sight it and never used it again. The rifle is very accurate but a bit heavy for me, I am not that young anymore! I prefer a lighter rifle even if that means giving up on accuracy. This rifle also comes with a Leupold Vari-X III6.5x20x50 scope. I also put a Limb saver recoil pad to it.

categories:Sporting GoodsGuns

1511 impressions

76 views

Wanted farmers or ranchers with a problem with gophers. Will eliminate your gopher problem. I'm 76 yrs. old and can start with 22 cal. air rifle (pellet), 22 shorts, 22 long rifle, 17 HMR and 223 Rem. Depending of your location, help with fuel and ammunition cost would be appreciated. Call 780-217-1798 or email - NO TEXT or MESSAGES please.

categories:Business and ServicesJobs

67851 impressions

5427 views

01.Remington 1100/11-87 12 GA.Conventional Skeletonized Black synthetic Stock-$60.00 02.Beretta A300 20 GA.used wood forend -$100.00 03.Beretta Stock A400 DLX 12GA - Oil finishing - No Kick Off.-$400.00 04.Used Sako M75 long action grey synthetic stock-$90.00 05.Boyds Prarie Hunter Ruger M77 stock, long action, hinged floorplate sporter barrel profile. Standard length of pull, Limb saver recoil pad.-$350.00 06.CZ457 LRP Stock Grey-$350.00 07.Fajen Ruger 10/22 Black synthetic Rifle Stock-$80.00 08.Hogue OD Green 10/22 synthetic stock-SOLD 09.Browning BLR Lightweight '81 short-action buttstock.Brand new.-SOLD 10.Browning Superposed 20 ga long tang stock-$350.00 11.Custom Sako 579 bolt action rifle walnut stock.-$200.00 12.Custom Sako 579 bolt action rifle LH black thumbhole stock with RH bolt action.-$150.00 13.Khan Arms 12 GA A-TAC Tactical shotgun folding stock and for-end -$80.00 14.Khan Arms A-Tac black synthetic forend-$50.00 New. 15.SKS ATI Desert Tan Adjustable Side-Folding Stock. Comes with gas tube cover.-SOLD 16.Lazer Arms XT14 20 GA.Single Shot Shotgun Black synthetic stock and for-end.Brand new.-$85.00 17.Baikal IJ-18 410 GA.for-end-$40.00 18.Baikal MP27 20 gauge for-end-$60.00 19.Henry H010 / H018 Wood Stock-$120.00 20.H&R stock-$40.00 21.Diana Model 48 wood stock-$100.00 22.Remington 700 BDL black short action synthetic stock-$90.00 23.Remington 700 short action synthetic stock with trigger guard,floor plate and follower assembly-$150.00 24.Browning A-Bolt Magnum action Black synthetic stock-$140.00 Local is preferred, but will ship at buyers expense. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

259312 impressions

14198 views

01.UTG Accushot 1-4X28 30mm Mill-dot Long Eye Relief Scope, 36-Color Circle Dot by AccuShot.With rings.-$160.00 02.Hakko Marksman 3-9X40,made in Japan, 1" tube-$130.00 Japan (used,good condition,some scrathes and marks) 03.Grizzly 3-9—32 -$50.00(used,good condition,only little rings marks) 04.Pursuit 6x24x44 with Side focus.Tactical Rifle Scope Adjustable Objective Mil-Dot Reticle Matte.-SOLD 05.NcSTAR Vism Sniper 1.1-4—24 Evolution Series Rifle Scope, Matte Black Finish with Illuminated P4 Sniper Reticle, 30mm Tube.-$200.00 brand new. 06.NcStar Shooter II 3-9x40mm Riflescope w/ Dual Illuminated P4 Sniper Reticle-Sold 07.Husqvarna Jaktoptik 4x32.Duplex type reticle.Rifle scope in matte black.-$80.00(made in Japan). 08.Weaver 3-10x40 Grand Slam Rifle Scope, Matte, Dual-X,Shows Some Wear From Use-$150.00 (Japan). 09.Cabela AR Rifle Scope 3X-12X44 with Side focus.223,Cabela's AR .223 Reticle,30mm Tube,4" - 3.7" Eye Relief,FOV36.7" - 9.2" @ 100 Yards,Matte Black,Red/green illumination with 5 intensity levels-SOLD 01.BSA Sweet 22-3-9X40 AO 3-9X40 Hunting Rifle Scope With Compensation,Duplex Reticle.-$120.00 02.NCStar 4×20 11mm mount-$30.00(used,excellent condition,some little marks) 03.Bushnell 4X Banner 22,11mm mount-$40.00 Japan(used,excellent condition,some marks) 04.BSA Red/Green dot,11mm mount-$50.00 Excellent. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

58810 impressions

2117 views

Backpack/rifle case.Barrett padded. New and unused. Includes muzzle pouch and magazine pouch. 50 inches long 13 inches wide. For MRAD 98 BRAVO etc or your other firearms. NEW. Sabre Defence Industries Padded Rifle Case. New. 45 x 15 inch. 75.00 bucks

categories:Sporting GoodsGuns

37044 impressions

2802 views

Please text anytime 6476871484. Brand new adapters for 12gauge guns. $110 each. Here is the list of adapters currently in stock. 410GA to 22LR smooth bore Adapter 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter 12GA to 44 MAGNUM RIFLED Shotgun Adapter 12GA to 9MM RIFLED Shotgun Adapter 12GA to 45ACP RIFLED Shotgun Adapter 12GA to 22LR rifled or smooth bore Adapter 12GA to 22WMR Magnum rifled/smooth bore Adapter 12GA to 410GA Adapter 12GA to 40S&W rifled 12GA to 45LC rifled 12GA to 10mm rifled 12GA to .380ACP rifled Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long adapter This adapters give your 12 Gauge single or double shot break open shotgun the ability to fire subcaliber ammunition. They will easily fit into your break open shotgun barrel. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Carry one gun and have the ability to shoot not only 12GA shells but also 357 Magnum or 38 Special ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

77739 impressions

6630 views

Please text anytime 6476871484. Brand new 12GA to 9MM RIFLED Shotgun Adapter - Chamber Reducer - Stainless 12GA to 9MM Luger - RIFLED Shotgun Adapter Designed for break-open style shotguns Precision machined from stainless steel This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 9MM bullet (standard 9mm Luger - 9x19). This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 9mm Luger ammunition. After firing simply remove the adapter and tip upside down to remove the spent 9mm shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The 9mm bullet side is precision CNC machined to the exact chamber dimensions to accept 9mm ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Made in the USA on American machines Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 9mm ammunition. Surprisingly accurate!

categories:Sporting GoodsGuns

43507 impressions

3824 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:Sporting GoodsGuns

12569 impressions

561 views

Please text anytime 6476871484. Fully functional pocket handgun in perfect like new condition. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Sharps & Hankins "No. 3 C" Four-Barrel Pepperbox, .32 Caliber Rim Fire , SCARCE This one is a Sharps & Hankins four-barrel pepperbox classified as a "Model 3C". It is characterized by the button-type barrel release and ejector mounted between the barrels. It is chambered for the .32 rim fire cartridge. The gun is in excellent condition, with original blue intact and the case colors on the frame. The markings are sharp and clear. This is a unique variant with a floating, internal firing pin which rotates a quarter turn with each cocking of the hammer and these are rarely encountered. The 4 bores are good with strong rifling all the way. The black gutta percha grips are excellent and undamaged. SN 5822, excellent overall. Christian Sharps (1811-1874) was one of the best-known firearms designers and manufacturers of the 19th century. Although he never achieved the volumes of Colt, S&W and Remington, Christian Sharps was a major supplier of long arms to the Union during the civil war. His carbines are iconic among civil war collectors. Sharps sporting rifles were extremely popular at the time, and still fetch premium prices to this day. Christian Sharps had a rocky and sometimes acrimonious relationship with his managers and partners, and would leave the Hartford firm in 1853, returning to Philadelphia. There, he formed a new company in 1854, called C. Sharps & Co. He manufactured pepperboxes and single-shot pistols, while the Sharps Rifle Co. continued with long arms. In 1862, Christian Sharps formed "Sharps & Hankins", in partnership with William Hankins, who had sold his own plant to William Uhlinger. Sharps & Hankins would continue until 1866, producing their four-barrel pepperboxes, single shot pistols, and military grade long arms in competition with his former company in Hartford. Soon after the war, the partnership was dissolved, and Sharps would go back to his previous name of C. Sharps & Co. He continued to manufacture the four-barrel pepperboxes until 1874, when the firm was dissolved after his death.

categories:Sporting GoodsGuns

8442 impressions

393 views

Please text anytime 6476871484. Brand new. 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 357 Magnum or 38 Special ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 357 Magnum or 38 Special ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions to accept 357 Magnum or 38 Special ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 357 Magnum or 38 Special ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

29486 impressions

2393 views

Please text anytime 6476871484. Brand new in original box. Hard to find gun stamped "Made in West Germany" very good for collection. Record air pistol Mod.LP3 4.5mm diabolo Single loader tilt barrel system with great ergonomic handle guidance. The LP3 is one of the most compact air pistols from Record. A very good price-performance ratio promises long-term and excellent quality in the free arms sector. With the 14cm long barrel, The Record LP3 also has a rifled barrel. Type: Air pressure / spring pressure pistol Manufacturer: Record Model: LP3 Color: black Caliber: 4.5 mm Shot capacity : 1 shot Weight: 785 g Bullet speed : 130 m / s Overall length: 295 mm Trigger: Single action Drive: Spring pressure Sights: laterally adjustable

categories:Sporting GoodsGuns

43821 impressions

4446 views

Please text anytime 6476871484. Brand new 12GA to 45ACP - RIFLED Shotgun Adapter Designed for break-open style shotguns Precision machined from stainless steel This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 45ACP bullet (standard 45 Auto). This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 45ACP ammunition. After firing simply remove the adapter and tip upside down to remove the spent 45 ACP shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The 45ACP bullet side is precision CNC machined to the exact chamber dimensions to accept 45ACP ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Made in the USA on American machines Will fit any break open gun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 45ACP ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style shotguns only. The risk is that the bullet could fall out of the adapter causing a dangerous result. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

23682 impressions

1844 views

Please text anytime 6476871484. Brand new. 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 40S&W ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 357 Magnum or 38 Special ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 40S&W ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.

categories:Sporting GoodsGuns

21072 impressions

1419 views