Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4750
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:Sporting GoodsGuns
11651 impressions
520 views
Calgary, AB4 days ago
Photo of Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
$2100
Smith and Wesson No. 2 "Old Model Army", Mid frame antique Revolver $2100
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very smooth action. No PAL needed. Can shoot 32rf long and short. Comes with FRT RCMP paperwork. Smith and Wesson No. 2 "Old Model Army", .32 RF Revolver This one is in very good condition. With original blue. The action is strong and accurate, and the cylinder indexes and locks properly without play. The bore of the 5-inch barrel is very good, with sharp rifling and mirror bright. The rosewood grips are very good and undamaged. They look like they may have been re-varnished once. SN 59474, very good overall. History & Background Horace Smith and Daniel Baird Wesson acquired Rollin White’s patent (1855) for the bored-through cylinder to manufacture what they originally called the No. 1 revolver in .22 rim fire. It proved to be a rather ineffective little pocket revolver but was nonetheless very popular with civilians as a personal protective weapon. In 1861, just as the civil war gained momentum, S&W decided that they needed a larger caliber revolver in order to be able to convince the buying public (many of them enlisted in the war) that their gun was a viable protective option and as a back-up gun in battle. The scaled-up design was duly named the No. 2 and was nicknamed the “Army”, as it was widely used by military personnel as a personal side arm. Smith & Wesson retained and defended the Rollin White patent aggressively throughout the civil war period, and until its expiry in 1870, and therefore the No. 2 “Army” would be the only American made cartridge revolver used during this conflict (although several “unlicensed” makers added their wares into the fray, such as Uhlinger, Pond and Moore). The model is called “Old Model” due to its frame shape – the square butt and octagonal barrel of the model 1 ½ First Issue, as compared to the bird’s head grip and round barrel of the Second Issue. There is no “New Model” Army. The "No. 2 Old Model" was a popular personal side arm of many officers in the Union forces during the American Civil War, and is also known as the "Army" model. It was first introduced in 1861, and made until about 1874. The "No. 2" refers to the frame size, "No. 1" having been the first, .22 caliber pocket revolver and the "No. 3"'s being the large-frame revolvers. The 1 1/2 was introduced after the number 2, and since it fits in between the no. 1 and no. 2, it was named the no. 1 1/2. The no. 2 was owned by such famous Americans as General George Armstrong Custer and "Wild Bill" Hickok, the marshal of Deadwood...
categories:Sporting GoodsGuns
8004 impressions
322 views
Mississauga, ON1 week ago
Photo of MAS Mle 1873 French Service Revolver,French Ordnance 45ACP/.455 Webley $2900
$2900
MAS Mle 1873 French Service Revolver,French Ordnance 45ACP/.455 Webley $2900
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with RCMP FRT paperwork. This is conversion to 45ACP /45 Auto also compatible with .455 Webley As well as original 11mm ammo. This one is in excellent original condition. it is "in the white", meaning it has never been blued or plated. It is not pitted, and all the markings are sharp and complete. The serial numbers - or parts rof - are repeated on all components: the barrel, cylinder, frame, grips, internal mechanism parts and even the screw heads and escutcheons. Everything matches. The bore of the 4 1/2 inch barrel is as perfect and it is mirror bright and the rifling is sharp. The barrel is newer replacement dated 1917. The action is excellent and accurate, and the cylinder indexes and locks without any play. The walnut grips are excellent and show no wear or damage this one looks like new. SN G38552, manufactured in 1883, rated excellent overall. MAS Mle 1873 French Service Revolver, 11mm French Ordnance The Mle 1873 was France's first double action cartridge revolver. After the disastrous loss to Prussia in the war of 1870, the French military closely examined its armaments and small arms, and they came to the conclusion that a new, more rugged and powerful side arm for their infantry was required. The result was the Mle 1873, designed by the famous partners of Chamelot & Delvigne, whose genius ideas would dominate much of the European military (and commercial) small arms market for decades to come. Many European countries adopted their designs, including Switzerland, Italy, Sweden, Russia and Belgium. Only the Brits and Germans would continue to develop their own side arms.
categories:Sporting GoodsGuns
12607 impressions
1015 views
Mississauga, ON1 week ago
Photo of Colt M1877 "Thunderer" .41 Long Colt Revolver Double Action "Bulldog" Model   $3900
$3900
Colt M1877 "Thunderer" .41 Long Colt Revolver Double Action "Bulldog" Model $3900
Please text anytime 6476871484. Antique revolver in ready to shoot like new excellent condition ,very smooth action. No PAL needed. Comes with FRT RCMP paperwork. Ammo is available but sold separately. This one is compact concealed carry version of famous Colt M1877 "Thunderer" was made for self defense and fast action. With "bulldog" type short barre and no regular extractor on the side this revolver made for concealed carry and optimised for fast action. The action is strong and crisp, and the cylinder indexes and locks properly, without any play in the cylinder. The bore of the 2 1/2-inch barrel is excellent mirror bright with strong rifling. The black hard rubber grips are very good and undamaged. SN 82458. ​ History & Background The M1877 was Colt's first double action revolver. Colt insisted on inventing their own double action mechanism, partly because there were numerous patents for DA revolvers in effect, which Colt did not want to infringe upon, but also because they trusted their chief engineers William Mason and C.B. Richards to come up with an original design. For this reason, the M1877's action is like a Swiss clock: it is somewhat convoluted and complicated, and it has earned the nickname "the gunsmith's favorite" over time. The gun did enjoy tremendous popularity however, and was manufactured for 32 years, even after Colt had improved the mechanism and simplified it considerably in later years. The M1877 was available in three calibers - .32, .38 and .41, and was originally called "Lightning". Later collectors coined the name "Rainmaker" for the .32 and "Thunderer" for the .41. In Canada, only the .41 caliber gun with serial numbers below 107,000 is considered an antique, as the others are either exempt calibers, or made after January 1, 1898.
categories:Sporting GoodsGuns
11666 impressions
1123 views
Mississauga, ON1 week ago
Photo of Webley Mark1  British Service Navy Revolver .45 ACP/45 Auto/ 455 Webley. $4950
$4950
Webley Mark1 British Service Navy Revolver .45 ACP/45 Auto/ 455 Webley. $4950
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with 2 moon clips for 45ACP, 1 adapter for .455 Webley and FRT RCMP paperwork. Webley MkI* British Service Revolver Navy .45ACP/45 Auto/ 455 Webley. The this one was checked and tested for smokeless powder by gunsmith and has NP proof mark. This one was professionally modified to accept 45auto rim and .45ACP cartridges on a moon clip and also can be used with original .455 Webley ammo. The gun is in like new condition with everything tight and working like a Swiss clock and plenty of the original blue remaining. The action is accurate strong and very smooth. The cylinder indexes and locks properly without any play. The bore of the 4-inch barrel is good and mirror bright, with sharp rifling. The grips are excellent and undamaged. SN 33645, very fine overall. History & Background Philip Webley & Son began making top break, hinged revolvers as early as 1880, with the Charles Pryse patented design they acquired for use on their Webley-Pryse revolvers. Soon thereafter an improved locking mechanism by Michael Kaufmann produced the Webley-Kaufmann design, followed by Webley's own improved "Government" model, or "WG". It was not until 1887, when the British military hoped to replace the Enfield revolver that the first "Mark" revolver model was introduced. The Mk I was soon followed by the MkII (1894), then III (1897), and eventually as many as six variations were made, between 1887 and 1949. The Webley top break "Mark" revolvers were probably the single most widely used side arm in the world, and were still in service as late as the 1970’s.
categories:Sporting GoodsGuns
12172 impressions
2173 views
Mississauga, ON1 week ago
Showing 21 of 162 records
Location
Search within
of
Categories

Other3
Medical Equipment3

Transportation options

Local Pickup149Can Deliver7Can Ship19