1) Winchester Post 64 M94 - Rear Sporting Leaf Sight w/ Elevator - $170.00 2) Winchester Post 64 M94 - Elevator for Rear Sight - $50.00 3) Winchester Post 64 M94 - Front Sight Silver Beaded Insert - 80.00 4) Winchester Post 64 M94 - Front Sight Hood - $40.00 5) 6) Winchester Post 64 M94 - Finger Lever Pin Stop Screw - $40.00 7) Winchester Post 64 M94 - Link Pin Stop screw - $35.00 10) Winchester Post 64 M94 SRC Front Band Screw - 40.00 11) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 12) 6-48 Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

73481 impressions

2781 views

4 only like new Barska 30mm tube , 2 only in 10-40x-50mm, 2 only in 8-32x-50mm I have found this brand and model to be reliable as I personally have 4 in the 6-24x. I do not use or sell or recommend the cheaper models. Barska seems to be a midline scope manufacturer well above Tasco and Simmons and slightly below the best Bushnell and Nikons. Scopes come from my Dads estate, time to sell. They all have Mil Dot with rheostat illuminated cross hairs, 1/8 moa clicks, parrallax adjustment on mid turret location with exposed turrets , nitrogen purged, 1lb 12oz wieght, at least 4'' eye relief (have 1 of mine on a 300 WM). They where all mounted on rifles with only slight marks on a couple of them. I do not normally use scopes over 24x unless fixed power so i am selling these off for that reason. Will guarantee all sales with money back if scope is defective within 30 days of purchase.

categories:Sporting GoodsGuns

24274 impressions

1400 views

HAD A STROKE AND MOVING CLOSE TO KIDS. 1980 BOXFORD MODEL 330 IS 13X40, 1/12 BORE, 3PHASE 220VOLT (PHASE CONVERTER INCLUDED) 2.5/1.75HP 2SP MOTOR,30-3000 RPM, ELECTROMAGNETIC BRAKE, CHANGE GEARS FOR 31/2-128 TPI (.2-7MM),TAPER ATTACHMENT, COOLANT PUMP, 4-JAW PRATT BURNERD CHUCK, 3 JAW PRATT BURNERD,6 TOOL HOLDERS DREHBLITZ 7.5 DEGREES ADJUSTMENT, 10'' FACEPLATE, STEADY REST,MISC TOOL ACCS. $50,000.00 #1 MILLING MACHINE,R8 SPINDLE, USED FOR MOSTLY FLUTEING BARRELS, 220-3400RPM, PULLEYS, 1''X 8"X 36'' ALUMINUM TABLE EXT., 20'' TABLE TRAVEL,SERVO POWER FEED,TILT HEAD 45 DEG., SWIVEL HEAD, $15,000. LARGE TOOL BOX WITH INSERTS, DRILL BITS & MISC.MEASURING INSTRUTMENTS. $3000.00. RIFLE BARREL CART WITH MISC TAKE OFFS, $1000.00 #2 MILL IS A CRAFTEX 601, 33 X 81/2 TABLE, CUSTOM STAND FOR COOLANT,DC VARIABLE SPEED, 50-2300RPM, 110VOLT- 12AMP, 4"HOLME VISE, 6'' DIVIDING HEAD, R8 SPINDLE, $8000.00. GUN RACK FOR STANDING GUNS, 2- 6'' GRINDERS'. WORK BENCH WITH VICE & BBL VICE, $3000.00. MISC. JIGS AND FIXTURES, DRILL PRESS WITH HEAVY STAND MADE WITH VICE AND 2 TON ARBOUR PRESS, $1000.00 BALDOR 10" BUFFER WITH STAND, POLISHING GRIT, WHEELS, $2000.00-4 BLUING TANKS WITH STAND AND SOME RUST BLUE, $1000.00 8"BANDSAW LIKE NEW, $750.00. BLASTING CABINET IS SILICONE SEALED FOR INDOOR USE, ALO GRIT, NEEDS A VACUM, $1000.00 3 MONTHS OF TRAINING WITH MACHINES(I HAVE LOTS OF WORK)$10.000 MONTH IF NEEDED.

categories:Sporting GoodsGuns

3704 impressions

295 views

1) Remington No. 701 Rear Sight w/ Elevator $75.00 6) Remington Dovetailed Front Sights $75 - $85 7) 6-48 Filler Screws (4) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 9) 6-48 Filler Screws (4) - Stainless - $20.00 10) 8-40 Pan Head Filler Screws (2) - $20.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

21782 impressions

499 views

Up for grabs is a Winchester Ducks Unlimited, commemorative or centennial medallion and model 101 shotgun grip cap with gold Ducks Unlimited insert. $50ea medallion has been sold, now selling model 101 shotgun grip cap $50 shipped

categories:Sporting GoodsGuns

7380 impressions

281 views

Winchester model 101 Diamond Grade Trap with 2 barrels set.30" O/U ported barrel with vent rib, top bbl fixed Mod/bottom barrel has screw in Winchoke. Single 34" barrel with high trap target ventilated rib and screw in Winchoke. Fully engraved nickel receiver, checkered walnut forearm, pistol grip adjustable comb stock, Gun locks up tight and has bright bores, wood still solid, with no cracks, some minor handling marks, as usual. All Barrels market " Winchester Diamond Garde" Trap -"East Alton.IL.USA".Gun still in a very good condition. M/F DG477XXX.Come with four chokes and case. Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

56108 impressions

5494 views

SWISS SCHMIDT RUBIN K11 MODEL: 1911 Action CARBINE CALIBER: 7.5 X 55, COMES WITH MAGAZINE, BORE IS VERY GOOD, SHINY. MADE IN 1931, VISIBLE NUMBERS MATCH. BLADE FRONT SIGHT WITH EARS, ADJUSTABLE U NOTCHED REAR SIGHT, BROWN POLYMER BOLT KNOBS, SILVER BOLT. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SWIVELS WITH METAL HOOK FROM SLING ON ONE OF THEM, STACKING HOOK, BAYONET LUG. METAL FINISH SHOWS SOME NORMAL SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW SOME NORMAL SMALL MARKS, SCRATCHES AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 23.25" CLASS: CANADIAN NON RESTRICTED. Excellent Overall Condition An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

33083 impressions

1399 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:Sporting GoodsGuns

41666 impressions

2845 views

Stevens model 58 12 gauge bolt action with 2 round mag, 26" barrel. 2 3/4” chamber. Fair condition CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

31061 impressions

1360 views

Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

35330 impressions

1336 views

BSA Model P17 30-06 23" barrel internal 5+1 Hinge Plate Mag. Monte Carlo right handed stock, Adjustable rear sight with protected front hooded blade sight. Front and rear swivel mounts. Receiver is drilled and tapped for scope base mounts Made in England. Blueing is solid and the stock is in very good condition. Bore is shinny with good rifling. Canadian Non-restricted The M1917 Enfield, the "American Enfield", formally named "United States Rifle, cal .30, Model of 1917" is an American modification and production of the .303-inch (7.7 mm) Pattern 1914 Enfield (P14) rifle (listed in British Service as Rifle No. 3), which was developed and manufactured during the period 1917–1918. Numerically, it was the main rifle used by the American Expeditionary Forces in Europe during World War I.Thisbmodel was known as the P17 and chambered in 30-06 Springfield . The Danish Sirius Dog Sled Patrol in Greenland still use the M1917, which performs reliably in Arctic conditions, as their service weapon. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

42929 impressions

1985 views

SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55 Very good original condition 1911-1920 conversion date to M191 action.. SWISS SCHMIDT RUBIN, MODEL: 1896/11 INFANTRY RIFLE, CALIBER: 7.5 X 55, COMES WITH MUZZLE COVER, BORE IS VERY GOOD. VISIBLE NUMBERS MATCH. BARLEY CORN FRONT SIGHT WITH RAMP, ADJUSTABLE U NOTCHED REAR SIGHT, SILVER BOLT WITH RED POLYMER BOLT KNOBS. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, MILITARY MODIFIED PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SLING SWIVELS, STACKING HOOK, BAYONET LUG. METAL FINISH TURNING SILVER GREY WITH LIGHT PITTING, SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW DINGS, MARKS AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 30.75", CLASS: CANADIAN NON RESTRICTED. The Schmidt–Rubin rifles were a series of Swiss Army service rifles in use between 1889 and 1958. They are distinguished by the straight-pull bolt action invented by Rudolf Schmidt and use Eduard Rubin's GP90 7.5×53.5 and GP11 7.5×55 Schmidt–Rubin rifle cartridge. The Schmidt–Rubin 1896/11 rifle, or the Model 96/11, was a Swiss upgrade to the 89/96 rifles they had, to use the more powerful cartridge adopted as the GP11. The GP11 cartridge operated at a higher chamber pressure, which the 89/96 action could easily handle. The model 89/96 rifles were modernized by changing the three-groove rifled barrel to a new 4-groove type, adding a pistol grip to the stock, changing the magazine to the 6-round type used in the 1900 short rifle, and modernizing the sights. This also streamlined the appearance of the rifles. Because more rifles were needed than were available, the model 1911 rifle, with slight changes, was put into production. Almost all of the 127,000-plus model 89/96 rifles were converted to the 96/11 specifications. An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

30565 impressions

1320 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 6) Older Original 1A - 1B - 1C Elevators - $60.00 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 12) Winchester 1873 - 1892 Saddle Ring Staple (only) - $65.00 Screws 14) 6-48 Filler Screws (4) - Blue   $20.00 15) Win 1890-06-62 Tang Screw  - 40.00 16) Win 1894-1892-1873 PG Tang Screw - 60.00 17) Win 1876-1886 Tang Screw  -  40.00 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 24) Win 1894 (pre 64) Loading gate screw - 40.00 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 29) Win 1885 Low Wall Tang Screw - 40.00 30) Win 1885 High Wall Tang Screw - 40.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

129064 impressions

7776 views

1) Winchester M88 + M100 Folding Rear Sight   -  $100.00 2) Winchester M88 + M100  - Front Sight Insert  -  $75.00 3) Winchester M88 + M100  - Front Sight Hood  -  $40.00 4) Winchester M88 Original Sling Swivels  -  SOLD 5) Winchester Post 64 M88 Plastic Butt Plate - 5 x 1 5/8 - 3 3/8 C-C  -  $75.00 7) Winchester Pistol Grip Cap "W" Insert Only -  0.735" x 1.16"  - $65 8) Winchester Pistol Grip Cap Scroll Insert Only -   $30 9) 6-48 Filler Screws (4) - Blue   $20 10) 3/8" DT Filler - Curved Top - $45 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

83718 impressions

4540 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - SMITH & WESSON Model 2206 /22 lr caliber has a solid stainless steel frame, ss slide and barrel - MINT CONDITION /like new in original box / A TRULY SUPERB TARGET PISTOL! - 6 inch /152mm long barrel with Target-Crowned Muzzle - The barrel is milled into the bottom of the pistol's frame, giving it an EXTREMELY low bore axis, thus, creating virtually no muzzle-rise with each shot fired - Very light, short and crisp trigger pull with adjustable over-travel set-screw behind the trigger - Barrel and front sight do not move when the slide reciprocates, making it very accurate with fast follow-up shots - Fully adjustable rear sight for windage and elevation with LONG sight radius, for better accuracy - 4 (10 rnd) steel, extremely reliable S&W magazines - Takedown tool, Rear sight adjustment S&W screwdriver - Spare extractor, springs and retainer pin (included) from the factory - Instruction Manual - Weight 39 oz /1106 g unloaded UPGRADES: 1- Trigger Job by Gunsmith to lighten the trigger pull 2- Professionally dehorned edges by Gunsmith (all sharp edges have been slightly rounded) 3- Modified 1/8 inch grip inserts (installed) to improve the overall grip and feel 4- Stainless steel allen head GRIP screws (lengthened & installed) 5- Grip tape (installed) Note: Serial Number has been blacked out in all photos

categories:Guns

34802 impressions

3521 views

Savage Elite Precision 300 win mag All accessories are not included No trade Description The 110 Elite Precision is the pinnacle of the Savage’s 110 designs. They’ve begun with the time tested Model 110 action and then rethought every aspect of the rifle. The overhaul includes all of the upgrades demanding shooters make to their long range tack drivers. The 110 Elite Precision has an Adjustable Core Competition chassis from Modular Driven Technologies (MDT). From its full length ARCA rail to its titanium nitride coatings, this is a rifle built for a lifetime of Elite Precision. FEATURES * Savage factory blueprinted action * MDT ACC aluminum chassis with fully adjustable stock * ARCA Rail along the entire length of the chassis * Stainless steel, flash nitride target receiver * Titanium Nitride bolt body * 1.5 – 4 lb user adjustable AccuTrigger * Self timing taper aligned muzzlebrake (Short Action Calibers Only) * MDT Vertical Grip and AICS magazine * Modified Palma contour barrel * 1-Piece 20MOA Rail Action: Bolt Ejection Port: Right Barrel Color: Natural Barrel Finish: Matte Barrel Length (in)/(cm): 30 / 76.200 Barrel Material: Stainless Steel Caliber: 300 WIN MAG Magazine Quantity: 1 Magazine Capacity: 5 Hand: Right Length of Pull (in)/(cm): 14-15.5 / 35.560 Magazine: Detachable Box Magazine Overall Length (in)/(cm): 49.75-50.7 / 126.365 Rate of Twist (in): 1 in 10 Receiver Color: Black Receiver Finish: Matte Receiver Material: Stainless Steel Type: Centerfire Stock Color: Grey Stock Finish: CeraKote Stock Type: Chassis Weight (lb)/(kg): 14.95 / 6.78

categories:Sporting GoodsGuns

86326 impressions

4882 views

Winchester 101 Pigeon Grade Trap Model 12 g with matching Winchester Case. Buyer pays shipping and must have a valid lisc (will be verified).

categories:Sporting GoodsGuns

1707 impressions

161 views

Brand new Model Number: EXPS3-4 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1” Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings,10 additional settings for Gen I through III+ night vision devices Power Source: 1 x 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The “E” is for “Extreme.” The EXPS3 offers true 2-eyes-open shooting and a 7 mm raised base that still allows for iron sight access. It features easy-to-adjust side buttons and an adjustable, locking, quick-detach lever for easy attachment and removal. It is also the optic of choice for the technologically advanced modern rifle hunter. Its night vision-compatibility makes it a versatile choice for day or night hunting.

categories:Sporting GoodsGuns

4041 impressions

446 views

Brand new Description: This optic goes on the 320 M17 – 320 LDC – 320 LDC PRO – 320X5 and 320X5 Legion Designed for fast, responsive target acquisition and accuracy, the ROMEO1PRO miniature open-reflex red dot sight was engineered to withstand the punishment of harsh environments. With an upgraded emitter for superior brightness and outstanding battery life, the ROMEO1PRO is capable of mounting to any SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO reflex sight interface and mounting hole spacing using the included M4 mounting screws. – Molded glass aspheric lens with high performance coatings for superior light transmittance and zero distortion – 3 MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions – TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot – New point-source emitter provides exceptional brightness with 12 settings (10 Daytime/2 NV), and 20,000+ hours of runtime – MOTAC (Motion Activated Illumination System) that powers up when it senses motion and powers down when it does not – Aircraft grade CNC Aluminum housing ensures a lifetime of reliable service – Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fogproof performance – Ruggedized protective steel shroud included for extreme durability – SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Features: Color: Black Weather Resistance: Yes Objective Lens Diameter: 30mm Magnification: 1x Lens Material: Glass Fabric/Material: Aircraft Grade Aluminum Attachment/Mount Type: Picatinny Reticle: 3 MOA Dot Gun Model: Sig Sauer Length: 1.8″ Height: 1.1″ Adjustment Type: MOA Battery Type: CR1632 Weight: 0.06 lb Included Accessories: Mounting Screws Brightness Settings: 12 Water Resistance Level: IPX-7 Illumination Color: Red Width: 1.2″ Battery Life: 20000 hours Objective Window Size: 28x18mm

categories:Guns

9127 impressions

890 views

New , wheeler scope base rings for savage 110 long action rifle Description Rugged 1 Piece Bolt Action Scope Mount with Integrated Anti-Cant Indicator Features & details SPECS: This Wheeler 1-piece bolt action scope mount with 34mm rings in extra high height is compatible with Savage 110 long action rifles. Base features 6-40 threads ACCURATE: Finding the right height can help make your rifle more accurate. With 20 MOA, Wheeler 1-piece bolt action scope bases help zero in sights for shooting long distances. CONVENIENT: Installation is easy with a 1-piece scope base. The flip-down anti-cant device can be posted on the front or rear ring to ensure a level mount. DURABLE: A 6061 aluminum matte black base makes for a solid, yet lightweight design. Clamping force is increased with a 6-hole ring design. EXPLORE: Caldwell offers a variety of 1-piece scope bases, including: Remington 700 short action, Remington 700 long action, Savage 10, and Savage 110 models. Get the perfect mount with Wheeler 1 Piece Bolt Action Scope Mounts. Made of 6061 aluminum, the 6 hole ring design features a swing out anti-cant level for a level scope mount every time. Designed to work with the Remington Model 700 LA/SA and Savage 10/110, these 1 piece scope mounts are available in 1”, 30mm, and 34mm ring sizes. Measures at 20 MOA elevation in base.

categories:Sporting GoodsGuns

30930 impressions

1474 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:Sporting GoodsGuns

5567 impressions

512 views