Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4750
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:Sporting GoodsGuns
11651 impressions
520 views
Calgary, AB4 days ago
Photo of Italian Glisenti Brescia Bodeo Model 1889 10.35mm/.44 Antique Revolver
$2600
Italian Glisenti Brescia Bodeo Model 1889 10.35mm/.44 Antique Revolver
Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:Sporting GoodsGuns
6620 impressions
241 views
Calgary, AB4 days ago
Photo of Webley Mark1  British Service Navy Revolver .45 ACP/45 Auto/ 455 Webley. $4950
$4950
Webley Mark1 British Service Navy Revolver .45 ACP/45 Auto/ 455 Webley. $4950
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with 2 moon clips for 45ACP, 1 adapter for .455 Webley and FRT RCMP paperwork. Webley MkI* British Service Revolver Navy .45ACP/45 Auto/ 455 Webley. The this one was checked and tested for smokeless powder by gunsmith and has NP proof mark. This one was professionally modified to accept 45auto rim and .45ACP cartridges on a moon clip and also can be used with original .455 Webley ammo. The gun is in like new condition with everything tight and working like a Swiss clock and plenty of the original blue remaining. The action is accurate strong and very smooth. The cylinder indexes and locks properly without any play. The bore of the 4-inch barrel is good and mirror bright, with sharp rifling. The grips are excellent and undamaged. SN 33645, very fine overall. History & Background Philip Webley & Son began making top break, hinged revolvers as early as 1880, with the Charles Pryse patented design they acquired for use on their Webley-Pryse revolvers. Soon thereafter an improved locking mechanism by Michael Kaufmann produced the Webley-Kaufmann design, followed by Webley's own improved "Government" model, or "WG". It was not until 1887, when the British military hoped to replace the Enfield revolver that the first "Mark" revolver model was introduced. The Mk I was soon followed by the MkII (1894), then III (1897), and eventually as many as six variations were made, between 1887 and 1949. The Webley top break "Mark" revolvers were probably the single most widely used side arm in the world, and were still in service as late as the 1970’s.
categories:Sporting GoodsGuns
12172 impressions
2173 views
Mississauga, ON1 week ago
Photo of Reduced - Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897.
$1600
Reduced - Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897.
Winchester Model 1894 Ref #1041. Early five digit serial number. Dated 1897. This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1897 Stock is excellent, appears original. A few marks. Original metal recoil pad fits well. Barrel is 26” long with sights intact. The read sights are intact and appear original. Bore is very nice, no obvious corrosion, does not appear to have ever seen black powder. Rifling throughout. Bluing is 40-50%. There are bumps and scratches on metal expected on a plus 125-year-old firearm. The drivers side receiver has a few light scratches and bangs. Screws have been used but are still usable. There is one on the loading port side that may have been a replacement. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly.  Overall, I grade this firearm as good and should be fully functional. I don’t see many from this time frame with bores looking this good. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations
categories:Sporting GoodsGuns
12717 impressions
901 views
Medicine Hat, AB6 months ago
Location
Search within
of
Categories

Other
Medical Equipment

Transportation options

Local Pickup7Can Deliver3Can Ship6