This ORIGINAL 1895 Marlin rifle was shipped from the New Haven, Connecticut factory on Apr. 29, 1903. Solidly built for the larger calibers, this one in 38-56 cal. and is in NRA fine condition. The receiver now appears as silver although its original case hardening pattern can still be made out. The rest of the metal has taken on a brownish patina. All numbers and lettering are sharp and legible. The barrel a 26 inch long smokeless steel SPECIAL order half round, half octagon version, with a 1/2 magazine. The bore is good with intact rifling and a bit of shine. The wood is a SPECIAL order walnut with a beautiful grain pattern on both the forearm as well as the butt stock. While no longer factory available the 38-56 caliber is equivalent to the 35 Rem. Reloading components are available from various sources. Marlin only produced only 18,000 Model 1895's, in contrast to Winchester producing 160,000 model 1886's which was the Marlin's counterpart and competition. This alone makes the Marlin a comparatively rare firearm. Factory Letter is included. All components that are numbered have been determined to be Matching! This includes the extra fancy stocks which do not show up in the letter. The purchaser will assume all shipping costs as well as any desired insurance. Please respond via email. Serious enquires only. Will ship Canada wide.

categories:Sporting GoodsGuns

16460 impressions

1619 views

Price is for the first one shown. The other is sold now. Never hunted, just tested.  No issues.   More photos available if serious.   A great Christmas Present .... Please use cell phone text messaging." Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:Sporting GoodsBows

1615 impressions

155 views

Selling- choice of two Plano Protector single rifle or shotgun cases. Your choice, reduced, now $45.00 each. Local pick up in Greater Victoria, not economical to mail. Sorry, no trades. Cash and carry or e-transfer.

categories:Sporting Goods

976 impressions

307 views

Hello, I have a like new Swarovski sts 20-60x80 hd with a stay on case and original boxes.  Also have a outdoorsman med alumium  gen 1 tripod and pan head.   Looking for $6000 for the spotter and stay on case Or $7500 for spotter and tripod with pan head, a window clamp mount for the spotter and a nanuk hard case that its all sitting in right now Can take more or diff pics if needed Located in Calgary 

categories:Sporting GoodsGuns

1425 impressions

73 views

REDUCED..SELL FOR LESS THAN HALF PRICE...$35...Brand new, payed $79.99 from Cabelas.fits short action rifles like 243, 6.5 creedmoor etc.it is a 4x4 mag. Sold gun and guy never wanted to purchase the extra mag. Selling at half price , when out hunting it is wise to have two mags just in case you lose one in the field, NO SHIPPING and cash only, to many scams out there now, serious people only..Text only please . THE MESSAGE SYSTEM ON HERE IS VERY UNRELIABLE

categories:Sporting GoodsGuns

52192 impressions

1190 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

11543 impressions

661 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19814 impressions

729 views

I have an original 1925 Winchester model 55 canvas and leather gun case for sale. Case is an excellent condition. This 100 year-old case was made specifically for the model 55 however will fit other lever actions as well. $100 now $50 gotta go.

categories:Sporting GoodsGuns

3102 impressions

213 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

13399 impressions

1172 views

24" Starret Digital Caliper, like new , comes in a nice hard case. I rarely used it and now retired from machining that big stuff, I am Gunsmithing only now. New price $1400, crazy ! Will possiably trade for firearm or yard equipment.

categories:Tools and Equipment

5708 impressions

646 views

Mark7 Revolution International fully automated reloaded for sale. This is the Evolution reloader fully automated with automatic primer feed, case feeder, bullet feeder, laser powder measure, laser bullet sensor, primer orientation sensor. Fully loaded machine. The regular Revolution is not available for export from the USA, so this is the machine for the rest of the world. Used for two seasons of IPSC competition but has not been used for two years now. Comes set up for 9mm but can reload rifle calibres as well. Approximately 100,000 rounds loaded with it. Many spare parts and cover included. Replacement cost is approximately $20k USD before shipping and any tariffs that now apply.

categories:Sporting Goods

3600 impressions

283 views

Excellent gifts for birthday's,Christmas stocking stuffers, for the gun,rifle,shotgun, owner . Description The BEST AND EASIEST WAY TO CLEAN ANY BORE. Clean your barrel or bore of any rifle or Shotgun! I have put a few pictures of the way to use a bore snake to clean the inside of your shotgun or rifle barrels. You can take this handy barrel cleaner with you in your pocket, to the range, on your next hunting trip, to clean your barrel as needed. Any rifle barrel cleaner we sell will fit in your pocket. There is no need anymore carrying your bulky (in a case) cleaning kit to the range, now just role up your bore snake and stick it in your pocket. What is a bore snake ? World' s Fastest Gun Bore Cleaner ; Cleans gun bores in 10 seconds ; Has 160 times more fabric cleaning the bore than a cleaning rod with 2 cleaning patches on it,bore snakes also has a copper or brass brush built into the rope of the bore snake! We have 11 different bore snakes that cover 23 + different calibers and will clean the following calibers. G01 : 12 GA Gauge, G02 : .22 Cal .223 Cal & 5.56mm, G04 : .30 Cal .308 30-06 .300 .303 & 7.62mm, including Sks, Mosin Nagant, SVT -40 M305, M14, M1A G05 : .17 Cal 17HMR .177, G07 20 gauge G08 : .270 Cal .280 .284 & 7mm, G10-243cal.6mm G12 : 410 GA Gauge, 41cal. G14 45-70cal G16-16 GAUGE G19- 10 GAUGE IS $15.00 My price is $10.00 each for all calibers. Can send any 4- bore snakes for $7.00 shipping, except 410, 45-70, 20 ga.16 ga.12 gauge AND 10 GAUGE as they are to thick to slide through the over size letter slot at the Post Office, Oversized bore snakes must go by parcel with tracking # shipping starts at $19.99 for tracked package , so buy all your bore snakes at one time and get them from $20.00 -$24.00shipped. Depending on amount and size. Each bore snake is now Only $10.00 ea. EXCEPT 10 GAUGE are $15.00 ea. Minimum order is 4 bore snakes per order. Text or call, 306-221-9599 all orders done by. E-Transfer Price and compare : Cabela's price is $28.00 ea. plus tax.for each bore snake. 12 GA. ARE CLOSER TO $30.00 AT Cabela's HAVE A LOOK AT ALL MY ADDS. dakotahunter on town post. How to use a bore snake ? Drop brass weighted cord through the bore. Pull slowly,being careful not to snag on edges or gun parts. Repeat as needed until gun bore is clean. The Bore Snake can be washed easily by Hand. Attention : Be sure firearm is uploaded before cleanup ; Verify your gun bore is free of obstructions after use of this product ; and before firing.Keep this product out of reach of children ; barrel cleaner, cleaning rod, barrel snake , barrel cleaner, fast barrel cleaner, rifle, shotgun, combination? Single shot, double barrel,drilling, break action, falling block, bolt action, semi auto, pump, Use the Bore Snake only on recommended calibers. Call or text 306-221-9599

categories:Guns

105580 impressions

6029 views

Looking to sell my Weatherby Vanguard in .243 Winchester. Comes with the Bushnell Engage 3-9x40 optic. Can also throw in 3 boxes of brass, 18 rounds of loaded ammo and a set of reloading dies as I'll have no use for them. The gun runs great and shoots fantastic out to 400 yards. Only had it out to the range once or twice to run a few boxes of ammo through it. Just don't have a use case for now with some of the other rifle I have in my collection. Asking $1000 for it. Valid PAL and matching drivers license required. Cash or E-transfer ONLY. Willing to deliver between Taber and Coalhurst.

categories:Sporting GoodsGuns

4620 impressions

279 views

As the title suggests I’m an ex Senior Investigator for some of the top richest individuals and organizations globally, based out of Vancouver currently. I was forced to take leave from my main career several years back, then due to a serious accident & injury I resigned my main role after almost a decade there.(the listing photo is a partial crop from my updated resume to provide more context. I can provide more details once a potential offer is on the table if necessary). After healing and a few years of odd roles including, personal matters of an employer to other larger training/teaching & volunteer/Not for profit jobs though mostly temporary assignments thus far, some other confidential jobs protected under NDA etc. due to the sensitive work material, I also promised not to speak of or mention any specific details relating to some cases… I am now ready to get my life back and am looking for some more serious opportunities & potentially permanence in a role. I am not looking for any one job or thing in particular, but open to start with potential side gigs, trial basis or “odd jobs” of basically any kind otherwise, that align to my skillsets & would be of use to my employer(s). And I have a long career with a high level, high experienced background so knowledge and skill transfer is absolutely reasonable. No tasks are below me as I’ve done everything from working in dish-pits to helping 3rd/2nd party clients like Netflix, Amazon and Apple along with various global LE Agencies catch mass fraud & stop trafficking rings to external financial attacks all while helping my own CEO sell their company and I always strive to be the best and do the best in the tasks given. There is to much in my background to really keep providing examples of so I hope that the gist will suffice for now, but I am definitely always open to answer additional questions of events I was involved in or case tasks I directly managed to completion. I’m a straightforward man and know to show good manner in ethics such as with relations to say; respect as one example, is something earned through trust & proof of worth, not in itself easily given and I take my own honor & my commitments seriously, I tell the truth to a fault as I believe lying is a form of betrayal in most all situation; whether it’s during a business deal for tech in multimillion dollar amounts between senior executives, security advisors, or when sighing up for a phone subscription. Point being, in my experience, profession and lines of work where I am often confronted with for example in many cases outright liars I feel it is an ethical & moral responsibly to be a straight arrow in my own actions. In these example I also became an expert at spotting lies by simply watching, not necessarily talking, sometimes via investigation; though often just uncovering them with patience and behavioral patterns & thus read lies whether on paper, CCTV or in person, it also helps when you expect nothing to be as it is presented at face value from most initial encounters. Which comes with the territory among many other skills and experience I have gained over the years, in my professional and personal life. So it is now time for me to turn over a new leaf and find a fitting role that is offering good work for good value. I will bring my talent and at very least I can make some new professional connections. Thank you for time and any considerations. Best Wealth & Health, -Rye

categories:Business and ServicesJobs

855 impressions

140 views

Bought the benelli super nove used it lightly and now it’s just sitting comes with ammo and case

categories:Sporting GoodsGuns

1173 impressions

272 views

Firstly I barely remember how to even play MTG let alone what the fk World of Warcraft game cards are. What I can say and do know is these were just received by me and I own them now as part of a family estate sale unfortunately so it legally did cost me and notary and having greedy parents and siblings isn’t fun frankly I didn’t even want these things but it was insisted in a will and I know somethings like these need to be properly protected and stored to be of any value and I don’t even trust what little family I left to do that.Digressing before I take these to some sweaty cardshop and either ask the employees at the place what they are worth get lied to and told “10 bux.” Or throw me a booster pack of Pokemans cards then display some random card I have for $3,000 in a 4 bolt locked case like I’m an NPC in TCG Manager or better yet ask the nerds in the store playing in sweaty 90 hour tournaments I figured I would check online first and I was told that FB marketplace is often the hip thing todo these days (what do I know I was 10 years old when Magic the Gathering came out and haven’t played last since I was like 12 which was like 1996: there are (and I’m guessing here) at least 300 to several hundred Magic cards and when I checked about 8 random cards there might be some World of Warcraft cards mixed in though I was told this is limited and I didn’t even know Wizards of the Coast made a WoW card game. These are seemingly in mint or near mint condition as I was also told this and my previous family member owner was OCD about that stuff it seems like a couple also have plastic sleeves with support backings to not bend or so the cards are extra protected. Now while I also have no clue in hell what any of these are worth by looking at them even if I checked all of them I would guess wrong. I know they were apparently from booster packs whatever that means. And they are 100% unsearched unchecked and unappraised aside from the ones I used in the pics and 2 random WoW cards I pulled out last night and apparently have been kept in this 2 foot cardboard shoe box full basically end to end and that seems to me like several hundred cards. I don’t know but I do remember the original graphics on the back of the cards which are there, I don’t know but my family member who is no longer around had more than this but sold them or something and may have kept the most valuable and possibly the original non reprinted versions that came out originally if that’s the case they gotta be worth something so anyone who is looking for a box full of Magic the Gathering and some extras in apparent mint condition/protected that might at least give you a more than good chance of finding a rare and valuable card missing from your collection or this box being worth a few hundred to a few grand. Its your lucky day? Again myself nor anyone else who knew my family remember nor did anyone else search, check, review, research, appraise, truly value these cards aside from the several I pulled out at random just prior to and for the pics for this ad. In addition to this I again have no freaking clue what any Magic Cards are worth these days especially if there are decades old originals in here which I am assuming there are maybe the one that might be in here is the one like the Dragon card I ripped to shreds as a kid that was worth like 20 bucks back then. Hundreds now maybe? For all I know I should be getting these officially sent away to the offical appraisal services that encase them all in clear epoxy and grade them then stamp them and for several hundred dollars mail them back in velvet bags. And there is a card in this converse shoe box worth 5 grand, I really don’t know even if I checked all of them. But ultimately I don’t want to sell them to a card game shop owner who rips me off. I haven’t checked the value of the ones I looked at. I want these to end up with an honest collector legit. I hope an honest collector makes an offer/request so they can valuate until I do auction. equal trade pls in my ads-gold diamond pinky ring, gold/diamond 10-24k chunky bracelet. A dumb tv 55”+ no issues like new condition & base, lightweight coffee table similar to the lifetimes, office desk&good desk chair. Antique firearms collector like grandfathered specifically small 6 shooters old Derringers.Reales/pieces of 8 or Gold Escudos etc real period ones even ones in pendants or set in rings.pre 1964 90% constitutional silver or earlier bags or cans of all kinds of 90% silver coins liberties any pre-1933 American Constitutional gold coins 5 dollars-50 dollar specifically half or double Eagles.EMUs.pure bullion USA Canadian, Valcambi bars any bars or maples silver/gold bullion from 1 gram 1/10, 1/4 to 1 Troy Ounce(ozt) and again if it’s worth close to what I’m offering and you are willing to trade or even partly sell mix options are fine. -13-inch Macbook M4. Again no one + me knows what most of these cards look like let alone their values.Thanks GL!

categories:Household ItemsCollectibles

5198 impressions

941 views

Celestron Regal 100ED Spotting Scope with Bushnell 784030 Advanced Tripod. Paid approx. $1400.00 together. Now over $1700.00. Excellent condition. Original package and carrying case for scope included.

categories:Sporting Goods

5956 impressions

485 views

TWO CLASSES IN FEBRUARY !!! 2 day weekend class, DONT WAIT these fill up quickly !! >SPRING CLASS BEGINNING <<<NOW>> (PICS are knives made by students) >REGISTER NOW CLASSES, >HOW TO REGISTER:--PM /EMAIL -"Include your name , contact number and WHEN you are available,WITH your questions! Then, FILL OUT REGISTRATION FORM (read below), for this" LEARNING" experience , Classes are in LETHBRIDGE, AB >Special groups can be arranged! WEEKDAY CLASS AVAILABLE! >DEEMED THE BEST LEARNING EXPERIENCE IN SOUTHERN ALBERTA<<<< THE OBJECTIVE: The course is designed to teach the ADULT student the specifics of knife making using high quality steel, installation of handles, brass and properly fasten to the knife stock. A knife making manual, is supplied for future reference. The class is design as hands on using a verity of power tools to remove stock to a final mirror finish from 440-C. STAINLESS. A “must have introduction” of heat treatment is also included. WHAT IS INCLUDED?: -steel, handle and pinning material. (Leather laser etched case, brass bolsters and special etching are available at an additional costs.) -all shop consumables (includes: glue, sanding materials, heat treatment and shop tools , video) -comprehensive manual for future reference, updated HEAT-TREATMENT manual for common knife materials! WHEN?: Classes are usually weekends:2 days, Saturday 8:30- 4:30pm, Sunday 8:30- 4:30pm. (times are reduced in smaller class) . These are in Lethbridge, AB , MAKE sure YOU MUST attend when classes are offered!! WHAT ARE THE COSTS?: Upon registration a $150.00 pre-paid deposit , EMT only (deposit nonrefundable, or transferable: insures your enrolment) and balance of $250.00 the day of course begins. If you’re interested ,need course dates, more information or registration form , please EMAIL/PM or call. . Thank you!

categories:Sporting GoodsCamping and Survival Gear

21521 impressions

2319 views

**Don't Miss Out! Annual Multi-Family Garage Sale** Join us for the ultimate bargain-hunting experience! Our annual multi-family garage sale is happening again beside Linda's Motor Inn, in the campground with the black steel fence. **Huge Selection of Items** * Household items for every room in the house * Clothing, blankets, dishes, knick-knacks, gadgets, and electronics * Toys, furniture, and tons of sports equipment * Life jackets, boat motors, propellers, and more * Hunting gear, including hunting blinds, gun cases, crossbows, and more * Shop and garage items, such as tools, hardware, and equipment for welding, carpentry, plumbing, and electrical work, all of your DIY requirements are covered. * Home decor and yard decor items **When and Where** * Saturday and Sunday * Campground beside Linda's Motor Inn (look for the black steel fence) **Rent a Table** * Tables available for rent * Contact Chantel at the campground or send a message through here to reserve your table. Come on down and check us out! We can't wait to see you there!{ Looking for anyone who may want to rent a space to join the large multi family yard sale. Book a spot now - weekends for all of September Fri sat and Sunday. Campground in the forte Beside Linda’s motor inn 3 spots left

categories:Household ItemsGarage sale

2643 impressions

470 views

Ad Title: Unknown Maker Made in Italy, Percussion Rifle, Cal. .54 Make : Unknown Maker Made in Italy Model: N/A Serial Number: 59995 Type of action: Percussion Rifle Barrel length: 28 inches Caliber: .54 Percussion. Note: Comes with set trigger and a copper box in the stock. Octogonal barrel with rifling. This rifle is heavy being 6,6 pounds. Condition: Very Good condition. The barrel has most of its blue except where the hands were holding the rifle. The action has a nice case hardening. Seems to be in very nice working condition. At one time there was a scope attached to this rifle. Now we are left with 4 holes where were the screws. Price: $395.00 Ref: 24A147 Shipping: $70 in Canada ($40 if Barrel and action are separated from the stock) Basic Insurance: $100 included with all purchases Full insurance: Add 2% of the value of your purchase to get full coverage Payment: By E Transfer

categories:Sporting GoodsGuns

14011 impressions

982 views

Looking to sell my brand new CZ alpha 600 hunting rifle calibre in 6.5 creedmoor, barrel is 22” and is threaded for muzzle brake already. Rifle scope is viper HST 4-16x44 scope zeroed for 50yard right now as I haven’t had much time to shoot it. 1 box of FMJ through i. Comes with the gun case, box of ammo. Scope is mounted with vortex rings as well Paid $2,400 for the set up without ammo or case looking to sell for $2,100 OBO the gun is brand new never even been out side.

categories:Sporting GoodsGuns

4261 impressions

583 views