1500.00 - Browning Medallion 7mm Rem. Mag; 26'' barrel with Boss. With Boss you can adjust to shoot any bullet accurately and reduces recoil. Some minor scoff marks on stock. Shoots the HSM 168gr. at 3140 f/s and about 2'' group at 300 yds. Also have drop chart to 800 yds. Second magazine and reloading RCBS dies. 1200.00 - Bushnell tactical 4.5 x 30 x 50mm with side focus. Scope set for 250 yds. and tactical dial up to 800yds. 810.00 - 119 rds. - HSM 168gr. Berger bullets. 50.00 - 20 rds. - Federal Premium 150gr. boat tail soft point. 40.00 - 19 rds. - Federal Power Shok 145gr. Speer Grand Slam No message. Emails only!

categories:Sporting GoodsGuns

73928 impressions

2168 views

2 Boxes of 50 per box of 243 Winchester Nosler Brass ready for reloading. Still in sealed box.

categories:Sporting GoodsGuns

53523 impressions

998 views

Hi big hole reloader, excellent bullet for 45-70, sizing .459, weight 415gr triple lube + Gas check, box of 100 for 60$. Shipping on your dime. Up to 175 bullets for 22$ shipped.

categories:Sporting GoodsGuns

28816 impressions

1533 views

I am selling some 1 lb cans of powder each can is $95 each 2 cans 1 lb each h4831sc SOLD 5 cans 1 lb each varget 1 cans 1 lb each imr 4350 2 cans 1 lb each imr 4831SOLD 3 cans 1 lb each H 4350 5 cans 1 lb each H 4831 1 jug 8 pounds Imr 4350 for $780 At this price they will not last long fcfs Thanks text 587-337-7340

categories:Sporting GoodsGuns

1417 impressions

206 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

11641 impressions

520 views

Offering 7 various shell holders for $ 7.50 each or $50.00 for all of them. These are for calibers which I no longer reload and some of them were rarely used.....I have listed them by make and number and the caliber for which " I used them " , but most will also be usable and  are listed in the charts for dozens of other calibers:  RCBS # 22 for .43 MAUSER  ,  LYMAN # 3 for 7.62x39  ,  LYMAN # 13 for 300 WEATHERBY MAG  ,  LYMAN # 19 for .30 CARBINE  ,  LYMAN # 15 for 8MM MAUSER  ,  RCBS # 17 for .32 ACP  ,  Unmarked ( LEE ? )# 9 which was for 44-40 WIN. & .44 MAG. Please consult an online, or your own,  Shell Holder Cross Reference Chart to satisfy yourself and verify, what cartridge they will fit.  I am willing to ship at buyer’s expense, or offer local pick up --- I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.        ***   Please note that I will be attending the Edmonton Gun Show in Stoney Plain on Dec. 6th & 7th and would be able to deliver any completed purchases at the gun show ,  during show hours.   *** 

categories:Sporting GoodsGuns

3981 impressions

126 views

• Large and small primer tubes • Powder container dump • Shell holder & dies(not included) Demonstration only. Fully functional! Reloaded 38/357, 41mag, 44mag, 45 ACP, 30-06 Any DILLON RELOADER is 2 - 3X more expensive in US dollars! Payment by cash at pickup. No other means accepted! Please, no telemarketing!!

categories:Sporting Goods

2997 impressions

328 views

Warrior Assault Systems Polymer 5.56 Mag Pouch x 2 ===== $38 each TAKE BOTH for $75~!! MOLLE/PALS Compatible Rotates 360° to desired orientation Locks out to 12 different positions Strong, durable construction with adjustable tension Pull to release Mags, No catches or clips Allows faster reload times Pick up around GTA Ship on buyer

categories:Sporting GoodsGuns

3147 impressions

353 views

Alliant 17 powder 1 lbs. $150 IMR 4350 powder 1 lbs. $90 Win. 748 powder 1 lbs. $110 Alliant 23 powder. SOLD IMR 7828 SSC 8 lbs. SOLD Hod. H335 1 lbs. $110. Hod. Varget 1 lbs $110. IMR 4320 1 lbs SOLD Win. 6.5 Staball 1 lbs $100 H380 1 lbs $110 IMR 4895 1 lbs. $110 BLC 2 1 lbs. $110 IMR 4064 1 lbs. $110 Primers: Remington 9 1/2 Mag. 1000 $200.

categories:Sporting GoodsGuns

11607 impressions

656 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Forehand & Wadsworth " number 32 Double Action", .32 RF Pocket Revolver This one is in excellent condition. The nickel plating is intact. Factory Engraved. The action is crisp and strong, and the cylinder indexes and locks properly and tightly. The bore of the 2 1/2 inch barrel is very good and bright with sharp rifling. The grips are very fine and undamaged. SN 13745, excellent overall. ​ History & Background Sullivan Forehand was an employee of Ethan Allen, the famous New England gunmaker. In 1860 he worked in an administrative capacity when he met his future wife - Allen's daughter - at work, and after marrying into the family became a partner in the business. Henry Wadsworth, an officer in the union army, met another of Allen's daughters while still in service during the war, and married into the family as well. Upon his discharge from the army, Wadsworth joined the company which was renamed "Ethan Allen & Co." After Allen's death in 1871, the two sons-in-law took over the firm and renamed it "Forehand & Wadsworth. They would become well known especially for their bulldogs, but also their many fine pocket and large-frame revolvers, single-shot deringers and pistols. Forehand & Wadsworth remained in business until 1890 when Henry Wadsworth retired and Sullivan renamed the company "Forehand Arms". After Sullivan's death in 1898 the company foundered and was taken over by Hopkins & Allen in 1902.

categories:Sporting GoodsGuns

849 impressions

128 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Remington-Smoot New Model No. 4, .38 Rim Fire Pocket Revolver. The design of the "New Model" Line of Remington revolvers is based on a patent issued to William S. Smoot in 1873. The four types, No. 1 through 4, are all similar in their use of a two-part frame which is joined just above the grip. This one is the No. 4, which resembles the popular "Bulldogs" of the day. It is in excellent condition with original nickel . The action is strong and accurate, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2 inch barrel is excellent and bright, with sharp rifling. The black hard-rubber grips are very fine and undamaged. SN 21108, excellent overall.​​ History & Background Like Colt, Remington had to get into the cartridge pocket revolver market by sheer public pressure. They, too, like Colt, experienced difficulties trying to compete with the cheap "suicide specials" which were available at that same time. Although sales were brisk at first, and the guns enjoyed great popularity due to their excellent quality, in the long run the public opted for cheap over quality, and by the mid 1880's production of the smaller models was halted. The Smoot patent refers to the spring-loaded cylinder pin / extractor found on the New Model No. 1, 2 and 3. Remington was well known to acquire the patents of other designers and incorporating them into their own line of products, and into the name of the models. Inventors such as Beals, Elliot, Rider and Smoot all contributed to the success of Remington handguns.

categories:Sporting GoodsGuns

27140 impressions

2343 views

Please text anytime 6476871484. Brand new. .38 RF Long Reloadable Ammo loaded $10 each Comes in 2 power levels : regular and P+ for larger frame guns in good condition.

categories:Sporting GoodsGuns

24964 impressions

2235 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:Sporting GoodsGuns

3945 impressions

367 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:Sporting GoodsGuns

4974 impressions

290 views

For Sale - Lee Precision BNIB .303 British Lee Classic Loader Full Length Sizing Die set $80 1 set available Brand new in box - only opened to take pictures, Contains: -full length body sizing die -de-capping chamber & decapper -bullet seater -powder scoop -priming rod -data, load chart, and instructions -handy red box EMT or cash - pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only. Small package/tracked, all provinces - $22 No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

20918 impressions

1046 views

Looking to sell new reloading halls and wad. 280 Fiocchi New Primed 12 gauge 2 3/4 #0641210 180 Fiocchi New Primed 12 gauge 2 3/4 #064122x 100 Multi Hull New Primed 12 gauge 2 3/4 #139127028 250 Fiber wads 260 Fiocchi New Not Primed 12 gauge 2 3/4 Orange 600 Fiocchi New Primed 12 gauge 2 3/4 Clear

categories:Sporting GoodsGuns

651 impressions

84 views

Looking to sell my Winchester XPR in .270 Winchester Short Mag (WSM). Comes with the the Leupold VX-Freedom 3-9x40 optic and rings and 2 magazines. Can also include some brass, hand loaded ammo and reloading dies if interested as I'll have no use for them. The gun runs great and shoots fantastic and is in good condition. I've mostly had it to the range but took it out hunting for 1 day a few years ago and cleaned up all my tags that day with it. It's spent the rest of its time in my gun case. Selling as I've got other rifles that do the same job and have no real use for it anymore. Asking $1000 for it. Valid PAL and matching drivers license required. Cash or E-transfer ONLY. Willing to deliver between Taber and Coalhurst.

categories:Sporting GoodsGuns

2072 impressions

175 views

For Sale - one Lee Precision 38-55 Win. full length steel reloading dies, BNIB - complete set (no crimp die included) $85 - firm! No trades or offers Brand new in box - new manufacture -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant If you want a crimp die also, contact me as one is available for sale...a must have for blackpowder reloaders and for rifles with tube magazines. EMT (shipped) or cash(pickup) - pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 (small box) Text or email only / unable to answer calls in remote areas

categories:Sporting GoodsGuns

19312 impressions

861 views

For Sale - one Lee Precision 300 Savage full length steel sizing dies - complete set (crimp die included) $85 - firm! No trades or offers 1 set available Brand new in box - new manufacture -full length sizing die -bullet seating die -crimp die -powder scoop -shell holder -data, load chart, and instructions -handy red box EMT or cash - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 Text, email or leave message / unable to answer calls in remote areas. If this ad is up then item is still available

categories:Sporting GoodsGuns

15485 impressions

736 views

For Sale - Lee Precision 45 ACP Auto Full Length Carbide Sizing 3 Die - no crimp die included $85 - firm! No trades or offers Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box The resizing die is carbide and is self lubricating, there is no need for resizing lube when resizing your casings with this die set. Payment by EMT(shipped) or cash(pick up) - Remote pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only. Small package/tracked, all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas. If this ad is up then item is still available.

categories:Sporting GoodsGuns

12178 impressions

775 views

For Sale - Lee Precision 7.62 Tokarev steel full length sizing 3 die set $85 - firm! 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant The resizing die is steel and is not self lubricating. Crimp die is extra & can be purchased separately but usually not req. / 7.62 Tok brass and projectiles are also available for extra, just inquire. Payment by EMT or cash - Pick up available by appointment only (cash), house drop box or shipped at buyers expense (emt) within Canada only by Canada Post. Small package/tracked, all provinces - $22 or $25-$28 if combined with other components. Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

14497 impressions

599 views