Photo of Smith & Wesson New Model No. 3 in .44 Special / Russian Open top. Antique $4800
$4800
Smith & Wesson New Model No. 3 in .44 Special / Russian Open top. Antique $4800
Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 New Model No. 3 Top Break, .44 Special / Russian Revolver. This one is in very good condition with longer 1 9/16 cylinder and can shoot both .44 Special and 44 Russian ammo. The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 5 inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid. Extractor works as it should. SN 10682, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favor of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.
categories:Sporting GoodsGuns
5679 impressions
613 views
Mississauga, ON3 days ago
Photo of Thread Protector with High Temperature Viton Rubber O-Ring - 1/2"x28" *Free Shipping*
$20
Thread Protector with High Temperature Viton Rubber O-Ring - 1/2"x28" *Free Shipping*
Description - Thread Protector with high temperature retaining O-Ring (up to 400°F) - Friction and Compression of the O-Ring retains the Thread Protector and prevents it from loosening off *Extreme rapid discharge will result in temperature exceeding 400°F and loosen the Thread Protector Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Tracked shipping (for an additional cost) available upon request. Brand: Created by Cay (Yes it's my original design) ___________________________________ What's Included - 1x Thread Protector 1/2"x28" - 1x Viton O-Ring Thread Protector Specifications - Material: AISI 4140 Steel - Finish: Knurled Matte Black Oxide (Blued) - Weight: 0.5oz (14g) - Dimensions: OD: 0.728" (18.5mm) / Length: 0.492" (12.5mm) - Weight: 0.5oz (14g) O-Ring Specifications - Material: Viton® Fluoroelastomer Rubber - Finish: Black - Max Temperature: 400°F (204°C) - Hardness: Durometer 75A (Medium) - Dimensions: OD: 0.591" (15mm) / ID: 0.472" (12mm) / Width: 0.060" (1.5mm) - Finish: Black *5/8"x24 coming soon Instructions 1. Check and make sure the firearm is unloaded. 2. Loosen off the stock thread protector or muzzle device in the counter clockwise direction. 3. Clean the thread (if necessary). 4. Install the High Temperature O-Ring over the threaded barrel. Do not overstretch the O-Ring, light pressure is sufficient the slide the O-Ring over the threads. 5. Install the Thread Protector in the clockwise direction. 6. Note that the Thread Protector can be installed in either directions. The smooth direction facing the O-Ring for more compression/friction or the cutout direction facing the O-Ring for a flush/clean connection. ***Video Instructions Coming Soon***
categories:Sporting GoodsGuns
17580 impressions
613 views
Edmonton, AB4 days ago
Photo of Thompson Center Arms .50 caliber Thunder Hawk In-line rifle
$395
Thompson Center Arms .50 caliber Thunder Hawk In-line rifle
Thompson Center Arms .50 caliber Thunder Hawk In-line rifle has a tapered round 1" to 7/8" x 21" stainless steel barrel with light handling marks to the finish. The bore is shiny and the rifling overall is good and sharp. It has a 1:38 twist and a mounted weaver rail. Bullet loads up to 150grn There are factory mount holes to install a ring-type set up. The Rynite stock has a checkered wrist and forend. The stock has a rubber recoil reducing pad and sling swivel studs. The firing mechanism is set up for the #11 percussion cap or 209 primer and has an outside manual bolt position safety. Length of pull is 14", the overall length is 39", weight is 5.4 lbs. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code. Valid PAL required. Will ship on your dime. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!
categories:Sporting GoodsGuns
104166 impressions
8990 views
Saskatoon, SK5 days ago
Photo of Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon Stock Internal 5+1
$1750
Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon Stock Internal 5+1
Howa 1500 .223 Rem Heavy Barrel Blackhawk Talon stock Internal 5*1 with adjustable grip inserts. manual, picatinny rail. Very low round count. Excellent condition. Howa 1500 barreled action Tool-less Firing Pin Removal Machined Receiver and Forged Bolt Large Internal Bolt handle and pressure vent holes One of the safest actions on the market Reliable M-16 Style Extractor/Ejector Stringent and Exacting Headspace specs Bolt Faces are True and Square to Chamber Two Stage Match Trigger 3 Position Safety SUB MOA – 3 Shot Group @ 100 yds with premium factory ammo The Synthetic BlackHawk Talon Rifle Stock comes with a durable, rubber recoil pad and sling swivel studs already mounted. The Talon Thumbhole Stock is the engineered fusion of the patented Knoxx recoil-reducing technology, ergonomic control of a pistol grip and time-tested elements of a traditional thumbhole stock. Reliable and built to last, this stock will help improve accuracy, target re-acquisition times and firearm control. Strategically placed texture and grooves on the pistol type grip and for-end ensures a positive grip when handling your rifle. The stock has aluminium pillars for increased stability when tightening down your actions screws giving you a solid point and preventing compression of the fiberglass reinforced polymer skeleton. The BlackHawk Talon stock has a dual recoil-compensation system to reduce the harsh recoil of bigger calibers. The stock is also completely ambidextrous benefiting both right and left handed shooters. Guaranteed to look great, feel great, and shoot straight! The tactical looking yet attractive durable finish on the stock together with the rubber recoil pad make for a comfortable shooting experience. The Howa Blackhawk Talon rifle stock represents excellent value and combines Howa’s famous prowess in manufacturing with a sleek high quality finish to compliment any rifle that will outlast the adventures that lie ahead. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code
categories:Sporting GoodsGuns
46448 impressions
1638 views
Saskatoon, SK5 days ago
Showing 21 of 239 records
Location
Search within
of
Categories

Other2
Medical Equipment1

Transportation options

Local Pickup214Can Deliver24Can Ship87