Modified SKS, action is beaded,  see trough scope base, with bushnell scope, stock extended plus recoil pad added. Leather custom made Cheek erase  added. Early production,  see low serial number.  Only magazine not matched,  like all skses. No any stamp or mark on reciver cover, can not tell is a tula or izzy made. Spring loaded firepin,  rifling very sharp. Way better then late production. Test fire by self 60 rds, no any issue.  Cleaned completely.   Don't need remove a scope base for  take a part completely.  Shipping available for extra cost.  Pal verification required. 

categories:Sporting GoodsGuns

8 impressions

5 views

Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. Tasted with modern smokeless powder ammo shown on the last picture. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Nagant M1887 Swedish Service Revolver, 7.5mm Nagant or .32 S&W long/short It is in excellent like new condition. This is an early, pre-1893, Belgian-made Swedish model, before Nagant transferred production to Husqvarna. It is in excellent condition throughout, with the original blue intact. The nitre-blue colors on the loading gate spring, hammer and trigger are excellent. The action is crisp and strong, and the cylinder indexes and locks properly, without play. The bore of the 4 1/2 inch barrel is excellent and mirror bright, with sharp rifling and no signs of pitting or wear. The walnut grips are excellent and undamaged, and show only a little wear on the right side. Pre-1893 Belgian proofs, SN 1827, rated excellent overall.

categories:Sporting GoodsGuns

5048 impressions

267 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

13840 impressions

349 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25091 impressions

878 views

Howdy Townpost. I have a really interesting piece for you here. This is a conversion of a conversion rifle. This is a German made Ludwig Loewe Gew 88 that was later converted by the Germans into a Gew 88/05 and most likely given to the Ottomans in WWI as war aid. Many of these were retained and later converted in the 1930's to a Mauser 1935 pattern type rifle. They converted a large portion of their arsenal to this pattern including SMLE's a plethora of their different Mausers, and Gew 88's they had in inventory. This rifle was rebarreled to shoot the modern 8mm Mauser cartridge and re-stocked into a more Mauser-esq stock. This stock features Mauser bolt disassembly disks despite them not being required for the Gew 88 action. The stock on this particular example had a fairly large wood defect that the Turks neglected to address has been fixed. It was cleaned out and filled with Brownells Acraglas epoxy so it's rock solid now. The overall condition is good. The stock was professionally refinished. The bore is excellent, very sharp and clean rifling. The rifle is located in Calgary AB for pickup or I can ship it nationwide on the buyer's dime. PAL will be verified as per C-71

categories:Sporting GoodsGuns

8494 impressions

616 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

15952 impressions

475 views

Old collectors piece. Razor sharp but definitely had some years of hard use.

categories:Sporting GoodsCamping and Survival Gear

730 impressions

149 views

Used good condition with gut hook and Sharp

categories:Sporting GoodsCamping and Survival Gear

713 impressions

138 views

Good condition, sharp.

categories:Sporting GoodsCamping and Survival Gear

442 impressions

123 views

Good condition razor sharp, not used much.

categories:Sporting GoodsCamping and Survival Gear

677 impressions

110 views

Savage 24-P 22LR/410. Mechanically this gun functions excellent,bores are excellent being bright and shiny and sharp pronounced rifling in the .22LR barrel. Finish and condition are as pictured.There are some marks on the stock & forestock.Good condition.Local is preferred, but will ship at buyers expense.Further Lost insurance can be purchased by the buyer. Valid Pal a Must. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

12884 impressions

1183 views

Mauser 98 Sporter 7×57mm bolt action rifle.24 inch free floating barrel with Iron sights,bore are excellent being bright and shiny with sharp pronounced rifling,double set triggers,QD Claw Mounts Scope rings and mounts.Schmidt & Bender Wetzlar 6x42/49 Rifle Scope,WW2 German era sniper scope,T-post sniper reticle, numbered 17872. Walnut Stock. Wood has some handling and storage marks,metal is excellent.Please send message to: medal1958@gmail.com

categories:Guns

48369 impressions

4541 views

early 1848-1884 sharps ammo -various as in pic $1500 have a lot of other early ammo as well

categories:Sporting GoodsGuns

248 impressions

55 views

Tikka 512S Combo 12ga/222 rem.Left hand. 24 1/2” barrel 12GA with screw in MOD. choke and 2 3/4 inch chamber,23 inch 222 Rem. barrel with Flash, select single trigger. Rear sight flip down. Receiver factory grooved 11MM for scope rings.Bores are excellent being bright and shiny and sharp pronounced rifling in the .222 rem. barrel.There are some dings & bruises on the stock & forestock. Local is preferred, but will ship at buyers expense. Valid Pal a Must.Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

37778 impressions

3176 views

Musashi Samurai Sword-Katana Super sharp and unique Musashi Samurai Sword-Katana. Includes a whole kit with stand, cleaning kit and accessories in a Silk Brocade box. Handmade replica.

categories:Household ItemsCollectibles

969 impressions

73 views

Please text anytime 6476871484. Brand new. $50 each $80 for 2. Tacked Leather Handle: delivers excellent strength, with grip ridges for safe and comfortable handling, provides balance with brass pommel / guard, non-slip grip to use Impact Nylon Sheath: with guard and belt loop for safe and secure carry with easy access Perfect for Outdoor or Collection: suitable for various military, hunting, survival, tactical, industrial and outdoor situations Blade Length: 5-7/8", 4-1/8"; Overall Length: 10-7/16", 7-7/8"; Weight: 0.15 lbs/0.37 lbs Razor Sharp Buck Knife: clip point blade has excellent strength, edge retention and corrosion resistance for lasting durability, good for piercing, detail work, and cutting in tight places

categories:Tools and Equipment

18453 impressions

1863 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with RCMP FRT paperwork. This is conversion to 45ACP /45 Auto also compatible with .455 Webley As well as original 11mm ammo. This one is in excellent original condition. it is "in the white", meaning it has never been blued or plated. It is not pitted, and all the markings are sharp and complete. The serial numbers are repeated on all components: the barrel, cylinder, frame, grips, internal mechanism parts and even the screw heads and escutcheons. Everything matches. The bore of the 4 1/2 inch barrel is as perfect and it is mirror bright and the rifling is sharp. The action is excellent and accurate, and the cylinder indexes and locks properly. The walnut grips are excellent and show no damage this one looks like new. SN G47715, manufactured in 1886, rated excellent overall. MAS Mle 1873 French Service Revolver, 11mm French Ordnance The Mle 1873 was France's first double action cartridge revolver. After the disastrous loss to Prussia in the war of 1870, the French military closely examined its armaments and small arms, and they came to the conclusion that a new, more rugged and powerful side arm for their infantry was required. The result was the Mle 1873, designed by the famous partners of Chamelot & Delvigne, whose genius ideas would dominate much of the European military (and commercial) small arms market for decades to come. Many European countries adopted their designs, including Switzerland, Italy, Sweden, Russia and Belgium. Only the Brits and Germans would continue to develop their own side arms.

categories:Sporting GoodsGuns

20444 impressions

1467 views

Please text anytime 6476871484. Brand new in original box. Please contact for other rare and hard to find knives. Blade Material: Stainless steel Handle Material: Stainless Steel & Plastic Overall Length:14.5cm/6.49" (Approx.) Handle Length: 9cm/3.54" (Approx.) Blade Length: 6.5cm/2.56" (Approx.) Suitable for: Outdoors: Survival, Camping, Sailing, Diving, Fishing and Hunting Color: black

categories:Sporting GoodsCamping and Survival Gear

15228 impressions

1600 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly with zero play on trigger pull. The bore of the 4 1/2 inch barrel is excellent and mirror bright with perfect strong rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 13345 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

19477 impressions

1137 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:Sporting GoodsGuns

8154 impressions

506 views

Please text anytime 6476871484. Fully functional pocket handgun in perfect like new condition. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Sharps & Hankins "No. 3 C" Four-Barrel Pepperbox, .32 Caliber Rim Fire , SCARCE This one is a Sharps & Hankins four-barrel pepperbox classified as a "Model 3C". It is characterized by the button-type barrel release and ejector mounted between the barrels. It is chambered for the .32 rim fire cartridge. The gun is in excellent condition, with original blue intact and the case colors on the frame. The markings are sharp and clear. This is a unique variant with a floating, internal firing pin which rotates a quarter turn with each cocking of the hammer and these are rarely encountered. The 4 bores are good with strong rifling all the way. The black gutta percha grips are excellent and undamaged. SN 5822, excellent overall. Christian Sharps (1811-1874) was one of the best-known firearms designers and manufacturers of the 19th century. Although he never achieved the volumes of Colt, S&W and Remington, Christian Sharps was a major supplier of long arms to the Union during the civil war. His carbines are iconic among civil war collectors. Sharps sporting rifles were extremely popular at the time, and still fetch premium prices to this day. Christian Sharps had a rocky and sometimes acrimonious relationship with his managers and partners, and would leave the Hartford firm in 1853, returning to Philadelphia. There, he formed a new company in 1854, called C. Sharps & Co. He manufactured pepperboxes and single-shot pistols, while the Sharps Rifle Co. continued with long arms. In 1862, Christian Sharps formed "Sharps & Hankins", in partnership with William Hankins, who had sold his own plant to William Uhlinger. Sharps & Hankins would continue until 1866, producing their four-barrel pepperboxes, single shot pistols, and military grade long arms in competition with his former company in Hartford. Soon after the war, the partnership was dissolved, and Sharps would go back to his previous name of C. Sharps & Co. He continued to manufacture the four-barrel pepperboxes until 1874, when the firm was dissolved after his death.

categories:Sporting GoodsGuns

8523 impressions

394 views