Krg Bravo for tikka t3/t3x short action Right Hand. I would prefer to sell mags with chassis as they have matching paint pattern. Rifle, scope and bipod not included in sale No original packaging but have all screws and spacers.  Custom sponge paint by me.  Add 2x matching  223 10 round polymer aics mags for 75$ (will need pal) Add arca spigot 150$ All in 700$ shipped Chassis only 500$ shipped Chassis and 2 mags 575$ shipped. (Need pal)

categories:Sporting GoodsGuns

2025 impressions

250 views

For sale is a Churchill 512 Silver double-barrel, side-by-side 'shorty'. It is a 12 gauge model, with 3" chamber, and 12.5" barrels (w/ fixed cylinder chokes). It has a full length turkish walnut stock. It is one of the shortest non-restricted shotguns on the market (with an OAL over 26"). This model has a barrel selector, and manual safety. This shotgun has less than a box of ammo through it, and is not even fully broken-in (the action is still very tight!). There are a few handling marks. It is a great shotgun for backcounty backpacking!

categories:Sporting GoodsGuns

15831 impressions

641 views

NOT for SALE - LILJA Warranty reference only. MAY 7, 2024 - Fifth anniversary. News Update; By acquiring a quality bore scope, I was able to see the problem with barrel. The rifling lands in front of the chamber had separated from barrel for about 1.25" and 1 land was protruding into bore. Cut off 2" of barrel chamber end. Machined new barrel end to fit receiver tighter by .002" and rechambered for 22 short only. At range gun shot 1/4" - 5 shot group at 50 yds. shooting CCI 22 short - 27 gr. HP. Seems the rifling is not shot out but can not understand rifling land separation. UNIQUE -- NO WARRANTY or REFUND from LILJA. Call phone or e-mail only. No messages. Aug. 27/24: Over the past 3 years I just added 3817 rds. of CCI 22 shorts to round count. Still shooting 1/4" groups at 50 yds.

categories:Sporting GoodsGuns

217561 impressions

17825 views

Baker Gun Batavia Leader made 1939 - 45 Conn.USA 12ga. Side by Side Side Lock ,Barrel 30 inch, Double trigger, Very nice for his Ages, Inside barrel very bright, A small line on shoulder butt fixed many years before I bought it, not very appear Nice collector, 650.00 + shipping Special price for short time.

categories:Sporting GoodsGuns

13233 impressions

1060 views

I have over 30,000 once fired brass cases of many different calibers and head stamps for sale. Prices are as follows, followed by approximate amounts available. I can ship up to 5kg or 11 lbs anywhere in Canada for $20 flat rate. That would be (300 +-) 300 Win Mag cases and more of smaller cases. Check this ad periodically as brass will be added when available or deleted when sold out. 300 Win Mag $1.00 each (3,000 +- available) 7mm Rem Mag $1.00 each (2,200 +- available) 300 Win Short Mag $1.00 each (350 +- available) 7mm Win Short Mag $1.00 each (174 +- available) 270 Win Short Mag $1.00 each (SOLD OUT) 30-06 Springfield $.50 each (2,600 +- available) 308 Win $.50 each (1850 +- available) 270-Win $.50 each (1,650 +- available) 7mm-08 $.50 each (SOLD OUT) 243 Win $.50 each (800 +- available) 303 British $.75 each (350 +- available) 22-250 $.75 each (200 +- available) 30-30 Win $.75 each (500 +- available) 6.5 Creedmoor $.75 each (SOLD OUT) 350 Legend $.50 each (75 +- available) 223/556 $.25 each (5,000 +- available) 9mm Luger $.06 each (1,000 +- available) Some other smaller lots available. Text or email is best. Text: 780-876-5050 or email: jdwill1951@gmail.com

categories:Sporting GoodsGuns

148612 impressions

3953 views

Brand new The Mini-Clip 2.0 was better than the original but the opportunity presented itself to go further using new highly efficient mold/manufacturing partners right here in Texas. The Mini-Clip 2.0 Flex has the flexibility to accommodate a wider range of short shell lengths, should Aguila ever want to make an even shorter (or longer) Minishell. Re-loaders were very interested in this accommodation as are buyers of Exotic Products Shorty shells in varying lengths. The 2.0 Flex will feed all but the longest in their line, the 3 Buck. Allows use of 12ga 1.75” Birdshot, Buckshot, and Slug shells                  Fits: 12ga Mossberg 500, 590, 590A1, and Maverick 88 models Use with Aguila Birdshot, Buckshot and Slug offerings in Mossberg 12ga 500, 590 and Maverick 88 models Easily installs and uninstalls in seconds to allow use of 1.75", 2.75" or 3" shells as desired by user Practice with less expensive Aguila birdshot as the recoil response vs. Aguila buckshot is slight Low recoil of buckshot allows for safe, easy and comfortable aiming and discharge with pistol grip configurations (with proper grip/face clearance, of course). Not confined to hip and laser shooting Mini-Clip stays in well, but may want to tape in with electrical or Gorilla tape for close contact or heavy foliage environment applications

categories:Sporting GoodsGuns

7935 impressions

493 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Browning X-Bolt Target McMillan A3-5 Ambush Rifle in 6.5 Creedmoor for sale. It’s a precision bolt-action target rifle in a Carbon Fiber McMillan A3-5 stock w/adjustable comb and with a stainless steel 26" fluted bull barrel with muzzle brake. Featured in Urban Carbon Ambush camouflage it’s got an 60 degrees bolt throw with an extended bolt handle, an adjustable feather trigger, 4 rd detachable clip, Pachmayr Decelerator recoil pad, 20 MOA Picatinny optics rail and bipod rail. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. 
Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Browning X-Bolt Target McMillan A3-5 Ambush Rifle, 6.5 Creedmoor. Made to the high standards you expect from Browning, this quality X-Bolt Target McMillan A3-5 Ambush Rifle is chambered in 6.5 Creedmoor and comes equiped with numerous features. These features include the Carbon Fiber McMillan A3-5 stock with an ajustable comb, a free-floating fluted barrel with a muzzle brake on 5/8-24 suppressor threads, picatinny rail for bipod mounting, a gray stainless steel 26" bull barrel, an adjustable feather trigger, detachable rotary magazine, a urban carbon ambush finish and more. Included with this bolt action rifle is two quick detach swivel cups, a 20 MOA picatinny rail, and a glass bedded receiver with a matte blued finish. The McMillan A3-5 stocks are US Marine proven tough, and are proudly featured on these X-Bolt models. PRODUCT FEATURES - Carbon Fiber McMillan A3-5 Stock Marine proven tough, this premium Carbon Fiber stock comes with an installed adjustable comb, textured gripping surfaces, palm swell, a Pachmayr Decelerator recoil pad, and finished in an Urban Carbon Ambush. This stock is a variation of McMillan's famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock comes with a thumbwheel elevator system which allows for precise vertical adjustments. With the adjustable comb you can adjust and align your sight plane to match the scope - Decked out 26" Long Bull Barrel Manufactured from gray stainless steel, this free-floating fluted barrel includes a muzzle brake on 5/8-24 suppressor threads, a thread protector, and an embedded target crown - Extended Bolt Handle, Feather Trigger, and 20 MOA Picatinny Rail This ambush rifle includes a steel constructed, glass bedded receiver that features a matte blued finish, a 60 degrees bolt lift with an extended bolt handle, an adjustable feather trigger, detachable rotary magazine, top tang safety, and bolt unlock button. The X-Bolt's three-lever gold plated Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. Attaching the ideal scope or accessory is easy with the aluminum manufactured 20 MOA Picatinny rail as well attaching a bipod or light to the included bottom rail SPECIFICATIONS Model Code - 035451282 Action Length - Short Action Barrel Length - 26" Overall Length - 46" Length of Pull - 13 5/8" Weight - 10 lbs 0 oz Magazine Capacity - 4 Twist Rate - 7" Barrel Finish - Satin Gray Stock Finish - Urban Carbon Ambush Receiver Finish - Matte Blued Chamber Finish - Polished Barrel Material - Stainless Barrel Contour - Bull Stock Material - Carbon Fiber Recoil Pad - Pachmayr Decelerator Checkering - Textured Grip Panels Sling Swivel Studs - 2 QD Cups Receiver Material - Steel Trigger Finish - Gold Plated Bolt Slide Finish - High Gloss Magazine Type - Detachable Trigger Material - Alloy

categories:Sporting GoodsGuns

21548 impressions

827 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19818 impressions

730 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:Sporting GoodsGuns

53838 impressions

1309 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

14027 impressions

682 views

PCI Ammo - 450 ADAMS REVOLVER Black Powder - 50 rounds AKA 450 Boxer Mk I, .450 Revolver, .450 Colt, .450 Short, .450 Corto, and .450 Mark III, and in USA as the .45 Webley These loaded to duplicate the original rounds of black powder loaded with 225gr RN Cast Lead Bullets loaded in custom modified cases

categories:Sporting GoodsGuns

10237 impressions

710 views

I have for sale some rare and very collectable Winchester dummy ammunition. Group includes 308, 38 special, 22WMR, 22 LR and 22 short. These are original Winchester factory, dummy cartridges not Commemorative or Centennial ammunition. $40 for the group.

categories:Sporting GoodsGuns

2073 impressions

225 views

Only taken out of box for photos. 16 inch barrel. NO TRADES, price is firm and shipping on buyer. I have more than one of this model and could sell 2 for $4650. Any questions text 250 713 9149. Please check out my other posts for new Ruger Marlin guns Thanks for viewing

categories:Sporting GoodsGuns

2913 impressions

172 views

Howdy there Townpost! I have another custom 12 Gauge delight for you to take a gander at! This is a custom-made one of a kind Ithaca M37 Featherlite put together by my gunsmith for me. As pictured, the overall length is 30 inches long and has a barrel length of 18.5 inches. It weighs 5 lbs, 7oz unloaded, so Featherlight is definitely even more apt than this when this thing was full length. Some fairly extensive work was done. Most notably the barrel and stock were cut down and reshaped the muzzle crown was nicely dressed with file work and reblued and it's nice, smooth and square to the barrel. The original red Ithaca fibreoptic front bead site was reinstalled at the new muzzle. The stock bolt with shortened and a nice decorative cast pewter medallion was added to the butt of the stock to cover up the bolt hole and add very nice piece of decorative flair. And sling swivels were added so this can carried around on sling. The action is very smooth the action release locks up properly, and the spring on it is in good condition. And it slam fires without a problem. What is slam fire you may ask? It means you can hold down the trigger and work the action and every time you close the action with the trigger held down the gun will fire. The gun will fire as fast as you can work the action. So needless to say it's pretty fun to shoot.  This would make an excellent hiking, camping or backpacking shotgun for predator defense in my opinion. Or if she just want a sawed-off shotgun that you can slam fire this is the gun for you. Ithaca started making short versions of the M37 for law enforcement called the Stakeout I believe those were mostly in 20 gauge and they came out sometime in the 70s or '80s. Inland Manufacturing to this day makes something similar to this called the Stakeout II for the US market with an MSRP of $750US. Short versions of the M37 have appeared in a lot of media, probably most notably is the shotgun in the movie Aliens where it's used for "close encounters". There's a well documented cut down Ithaca Featherweight by a Navy SEAL who put a duckbill spreader on it, put a magazine tube extension so that it held 8 and cut the stock off in much the fashion that this one is. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's very short when broken down, and light so it should be cheap to ship. PAL is a must!

categories:Sporting GoodsGuns

2308 impressions

214 views

Please read entire ad! Prices below are not negotiable!  No trades or offers! Prices and quantities are as follows for parts: Bolt, Chinese Type 56, complete w/floating firing pin, extractor, etc - SOLD Bolt, Chinese Type 56, stripped - $35 Dust cover, Chinese unmarked - $40 (1 available) Long Recoil spring, complete - SOLD OUT Short spring - SOLD OUT Take down latch, Russian - $10 Magazine, internal 10rd pinned to 5, Chinese - $50 (2 available) Spike Bayonet, complete - $65 (3 available with spike, bolt, spring & handle – new condition). Ammo bandolero pouch, Chinese - $25 Cleaning rod, Russian - $25 Cleaning rod, Chinese/NcStar - $15 Front sight base w/bayonet lug (with sight pin & block, no mounting pins included for front sight) - $60 Gas tube handguard, black molded plastic (Tapco perhaps?) - $25 Gas port reamer (carbon) cleaner, gas chamber - $15 (3 available) Oil bottle, square green plastic - $3 Oil bottle, steel (round) - $6 (2 available) Oil bottle(steel), pouch - $4 Ammo pouch, Russian - $10 (2 available) 10rd stripper clips, Czech made - $3 ea (6 available) These are the only parts I have... I have no trigger groups, gas tubes, stocks, other springs, slings, barreled actions, recoil lug bolts, spring loaded bolts, rear sights or parts, muzzle brakes or bladed bayonets available. No parting out pieces of the magazines, bayonet units or receiver bolts...you purchase the whole unit. If it’s not listed above then it’s not available.  All of you know how hard it is to find SKS parts nowadays... this is it! Items and pictures will be removed once parts have been sold...items will not be “saved/on hold/held ” unless paid for in full, no exceptions! Items are sold on a first come basis w/ payment in full.  Please don’t ask about the certain serial numbers on the mags...they are either Chinese or Russian only. Shipping available – Items combined to ship / I ship within Canada only. Ship costs starts at $20 Payment by EMT (shipped) or cash (F2F pickup)

categories:Sporting GoodsGuns

34515 impressions

1176 views

Howdy Townpost. I am selling this Remington 3.5inch Super-Mag that I picked up from BassPro in Calgary. I never got around to shooting it but I got a deal on it so I'm willing to let it go for cheaper than usual. This was a store demo gun, which essentially means it was dry cyled and shown to customers a few times. It's more or less a brand new shotgun. There's hardly any wear on it with the exception of some cosmetic blemishes from some small patches of surface rust that formed on the parkerized receiver. I suspect they never oiled it and peoples hands or just some moisture caused it. I cleaned it off and oiled the whole gun. It's pretty smooth even though it's a new gun and hasn't been broken in. The rubber recoil pad is still nice and soft The date code looks like AJ so it's a 2015 production. It was kicking around BassPro for almost 11 years! These regularly retail for $750+tax but occasionally go on sale for $650+tax. So I think $630 with no tax is not a bad deal for an essentially brand new shotgun. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

2611 impressions

149 views

I'm back to printing and selling my 3d printed ammo cases! Each case holds 100rds. The standard cases are for 22lr / short and are unmarked (unless added on), and the .17HMR and .22 WMR cases have sunken in labeling on the side. Colours can be mixed and matched to make them as custom as you’d like, nothing beats an ammo case that matches the rifle! Each case consists of 1 box, 2 inserts and 1 lid. ————pricing———— 50rd .22LR cases - 8$ each (minimum of 2 required). +1$ each for ammo type or brand printed on lid. .22lr /.17Mach2 case - 12$ each. +2$ each for ammo type or brand printed on lid. +2 for Labels on sides or ends. 200rd .22LR cases - 24$ each. Comes with 4 inserts. +3$ each for ammo type or brand printed on lid. +2$ each to fill labeling with black or white epoxy. .17HMR / .22WMR - 14$ each. +2$ each to fill labeling with black or white epoxy. +2$ each for ammo type or brand printed on lid. Custom Designs, Filament types and other add-ons can be discussed as well! The more custom, the better! Bulk rates available on larger orders. Most orders will be printed on demand so please allow a few days to get everything printed and shipped out. Bigger orders take more time and custom requests of ammo brand or type on lid take extra time to design and print. Shipping is on buyer. I generally use Canada post flat rate boxes but I can do up a quote based on postal code to get the best price. If you have any questions please reach out or if you’d like some photos of something not pictured. Check my ads in the near future for more 3d printed firearm items as I aim to have an inventory of handy shooting items or fun and useful projects!

categories:Sporting GoodsGuns

24875 impressions

703 views

This is a 1940 Ishapore made No 1 MK111 ( not a MK111*) with mag cutoff and period correct RFI stamped bayonet. The hardware and wood set is good to excellent condition ( for an 84 year old rifle) and as far as I can tell, completely original from the factory. Bolt, receiver, Barrel, rear sight and nose cap are all matching numbers. The magazine isn't matching numbers but is RFI stamped. The bayonet is the short 12 inch "Indian Pattern" which I believe is a 1943 made bayonet. There are some visible repairs to the butt stock, maybe field repairs or post military use - I don't know. I can't make out the markings on the underside of the butt stock but it doesn't appear to be English or Latin script, possibly Punjabi, Bengali or Burmese. The barrel is probably nearing the end of it's life but I have taken this rifle to the range numerous times and it shoots fine with pretty good accuracy at 100 yards. I didn't really want to sell this one as it's a great historical piece, but I need to reduce the amount of Rifles and spare parts I have. PAL required etc - let me know if you have any questions or want more photos. Collection from Summerland BC preferred but shipping/post can be arranged at buyers cost.

categories:Sporting GoodsGuns

31332 impressions

1648 views

Bike is in very good condition. Engine is very strong. Original pipes, no rust or rot. Runs very good. Tires are in good shape. Chain and sprockets in good condition. Cons; Typical Honda fuel tank rust where sticker was. Decals are slightly faded. Tach needle broke, but still turns (just short) Has a Crack on left side panel. I still ride this bike on a regular basis. Will always catch people's attention.

categories:Auto and TrailersMotorcycles

18269 impressions

1944 views

For sale is a federation firearms 1867 lever action in 410 bore. This version has a 13" barrel making it ideal for wilderness carry or a truck, tractor or quad gun. 410 is very versatile #6 is good for chickens, #4 for general use, while slugs impart better energy than a 357 magnum for predator defense. The gun is optic ready with a mounting rail right above the barrel. I suggest pairing this with a Vector Optics Frenzy. With the purchase of any gun, you can take 40% off any in-stock optic on the website or here on townpost. Please click my user name to see my other ads. PAL must be verified before any viewing, purchase or shipping. To verify I will need your PAL number, date of birth and the email you have on file with the Canada firearms center. If you become evasive when I try to verify your firearms license, I will discontinue communicating with you; it is the law. Shipping is available at actual cost or pick up in SE Edmonton. WARNING: messages sent through townpost are often not getting through. Please text me directly. I can take cash, emt or credit card payments.

categories:Sporting GoodsGuns

16325 impressions

1159 views

338 Win Mag   ·         16 – Win Power Point 200 grn $60 38 Special   ·         Box of 50 $100   357 Mag   ·         Box of 50, 125 grn, Ruko $ 100   12 gauge, 2 ¾ “ slugs (all boxes have 5 unless otherwise noted)   ·         3 boxes, Hornady SST, 300 grn FTX $10/box ·         2 boxes of Hornady, 300 grn Custom Lite $10/box ·         4 boxes of Rem, 385 grn Accutip Sabot $15/box ·         2 box of Fed 1 oz $10/box ·         1 box of Fed 1 ¼ oz $10/box ·         Challenger, 1 oz Shorties (36) $2 each ·        10, mix of 1 1/8 oz – 4 Fed & 6 Score $15 ·         Score 20 X 1 1/8 oz $25 ·         5 Winchester Platinum Tip Supreme 400 grns $10/box ·         5 Winchester 1 oz rifled $10/box ·         1 Winchester 1 oz HP $10/box ·         1 Winchester Super 1 oz $10/box ·         5 Hornady SST 1 ¼ oz $10/box ·         1 Rem $10/box   12 gauge, 3 “, slugs  5 Fed + 4 Rem, 385 grn $20

categories:Sporting GoodsGuns

2486 impressions

145 views