Photo of Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
$4750
Antique Swedish Husqvarna Model 1887 Nagant 7.5mm Revolver, Shoots SMOKELESS .32 S&W Ammo!!!
Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.
categories:Sporting GoodsGuns
11641 impressions
520 views
Calgary, AB4 days ago
Photo of AK-47, New Production, 5/10 Croatian "Shorties"
$40
AK-47, New Production, 5/10 Croatian "Shorties"
Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.
categories:Sporting GoodsGuns
47307 impressions
1221 views
Calgary, AB4 days ago
Photo of 2020 Thor Motor Coach Four Winds 28Z
$89,999
2020 Thor Motor Coach Four Winds 28Z
Experience comfort, reliability, and adventure in this well-equipped 2020 Thor Motor Coach Four Winds 28Z. Built on the dependable Ford E-Series chassis with the powerful Triton V10 engine, this Class C motorhome offers an ideal balance of performance and luxury for every journey. Key Features: Length: 29 ft Chassis: Ford E-450 Engine: 6.8L Triton V10 Transmission: Automatic Sleeping Capacity: Up to 6 people Interior Highlights: The spacious full-wall slide-out creates an open, comfortable living area perfect for families or couples on the go. The kitchen features a three-burner range, oven, microwave, refrigerator, and plenty of counter and cabinet space. The booth dinette and sofa offer comfortable seating and easily convert to sleeping areas when needed. In the rear, you’ll find a private bedroom with a walk-around queen bed, wardrobe storage, and a TV mount. The bathroom includes a shower, toilet, and sink with a medicine cabinet for added convenience. Additional Features: Overhead cab bunk with ladder Touchscreen dash radio with backup camera Onan generator Power awning with LED lighting Ample exterior storage Ducted air conditioning and furnace This Four Winds 28Z is in excellent condition and ready for your next road trip or getaway. It’s a great opportunity to own a quality Class C motorhome from one of the most trusted names in the RV industry. Offered by: Leigh-Anne Mancini Fraserway RV – Edmonton Stock #81287A 📞 604-866-9536 Contact Leigh-Anne today for more details or to schedule a viewing.
categories:Auto and TrailersMotorhomes
1287 impressions
148 views
Edmonton, AB19 hours ago
Photo of Skid shack - Atco Trailer
18,900 OBO
Skid shack - Atco Trailer
-2 private offices or bedrooms, one on each end, each has an automatic closing door and one window — one desk and office chair included -12’ x 55’ on 3 skids -Has furnace on propane—shown in closet in one pic -air conditioner works great. -large central open section with 2 windows, 2 operating doors -two boarded up doors ( as it was a walk-through unit) In good condition. It’s a 1997 Two purchase options: 1st option: - is as described above $19,500 OBO (includes the gst) 2nd option: Includes -36” shower stall -$2000 of plank flooring -fridge -narrow counter with small sink and upper cabinets for mini-kitchen -window to install on the windowless side (in a boarded up door space) -2 steel lockers for secure storage indoors or outdoors All above included $22,500 or best offer Reason for selling. Bought to renovate, however our craftsman/renovator, our son, has developed severe pain and is doing what he is able — mostly caring for some of our livestock. If you read this far, here’s a special offer. Have this on a low-interest loan until November, and will accept 3 or 4 instalments towards full purchase price. Can provide references that we are trustworthy. ______________ If you are setting up home on bare land, owning a unit like this has several advantages over purchasing an older mobile house trailer. It is cheaper to move ( 1/2 or 1/4 the cost. Easier to set up. Most likely in better condition. Keeps a better resale value—in addition to private interest, businesses will be interested in a unit like this for a bunkhouse or office space or for use at a project site. Can also be repurposed into a shop or storage space. Or a guest house — after you move into your new permanent home. ____________ How do I know all this? I have bought an older mobile which cost $3000 and $3000 to move. Took 1000s more to repair and it still needs more. Bought another one for $1.00. Yes one dollar. It was double-wide and took $10,000+ to move and 1000s to set it up and make it a comfortable space. One final point, counties aren’t happy with older mobiles, and insurance companies won’t insure them. And…. well that’s enough sharing for one ad…
categories:Auto and Trailers
1394 impressions
282 views
Alberta3 months ago
Showing 21 of 72 records
Location
Search within
of
Categories

Other1
Medical Equipment

Transportation options

Local Pickup62Can Deliver10Can Ship5