Photo of ORIGINAL 1880's ANSON MILLS CARTRIDGE BELT & PATENT 1881 MILLS/ORNDORFF " OLD RELIABLE " BUCKLE
$500.00
ORIGINAL 1880's ANSON MILLS CARTRIDGE BELT & PATENT 1881 MILLS/ORNDORFF " OLD RELIABLE " BUCKLE
  I am downsizing my antique gun and militaria collection to move into a much smaller house with a much smaller gunroom.......offering an original 1880's Mills pattern , woven ammo belt with a rare 1881 Patent Mills/Orndorff brass " OLD RELIABLE " buckle and retainer. The loops hold .40 to .45 caliber rounds and included are twenty .44-90 Sharps bottleneck cartridges. Please view the photos closely as the belt has been well used and has some damaged loops and earlier field repairs.....I have always refrained from doing any repairs or "enhancements" to my original antiques as the wear and tear is a natural part of its history and character. The cartridges are not original but are repro brass which was purchased about 45 years ago and which I loaded with black powder and some very old primers which were purchased about 50 years ago ( used for display purposes only ). The belt and attached buckle were purchased by me in 1967 at an Ohio gun show. The brass buckle has that beautiful patina which only time can create and it does have a few dents from honest wear and tear.....contact me if you interested and need more photos, or different angles, as the website only allows 10 photos. This is a rarely encountered ensemble.    I am willing to ship at "BUYER'S EXPENSE" but it will need to be by a trackable and insured method, or I offer local pick up --- OF COURSE I CANNOT SHIP THE BLACK POWDER CARTRIDGES WITHOUT REMOVING THE POWDER AS THEY ARE CLASSED AS EXPLOSIVES.......THIS COULD BE POSSIBLE AS I HAVE NEVER CRIMPED MY SHARPS CARTRIDGE RELOADS WITH PAPER PATCHED BULLETS. I am also in Red Deer one day per week and can arrange to meet there, or enroute, for delivery.            
categories:Sporting GoodsGuns
8227 impressions
368 views
Ponoka, AB5 hours ago
Photo of RCBS Precision Micrometer 300WinMag
$90
RCBS Precision Micrometer 300WinMag
Instead of Calibre specific micrometers I use a different system. So this is simply not used anymore and available to you. Check out what RCBS says on their website about using these: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Note that I will not respond to contact that is not made by a member of this community through the messaging system on this website. Not trying to be difficult just want to avoid scammers. With respect, Cody
categories:Sporting GoodsGuns
4630 impressions
284 views
Calgary, AB2 days ago
Photo of RCBS Precision Micrometer 243win
$90
RCBS Precision Micrometer 243win
I don't have anything in 243win anymore so this is surplus to my needs. As to what this does; check out what RCBS says on their website: The Precision Mic is an invaluable tool for handloaders who want to achieve safe, accurate loads that will extend the life of rifle brass. With just a few twists, the Precision Mic allows reloaders to determine chamber headspace and bullet seating depth to an accuracy of 0.001 inch. Its precise readings and ability to extend the life of rifle brass make it an excellent investment for anyone who takes reloading seriously. The Precision Mic measures from the datum point on the case shoulder to the base, giving reloaders precise readings that are in line with SAAMI tolerances. This level of accuracy is crucial for achieving consistent and safe loads, as it ensures that brass is not only properly sized, but also correctly seated. In addition to helping reloaders ensure that their loads are safe and accurate, the Precision Mic can also help extend the life of rifle brass. By accurately measuring headspace and bullet seating depth, reloaders can adjust their reloading process to ensure that brass is not overworked and that it lasts for as many reloading cycles as possible. Located in Radisson Heights, Calgary  Or ship by Canada Post Flat Rate boxes.   Fill them up as much as possible up to 5kg.: 24.1 x 16.5 x 8.9cm.   $20 35 x 26 x 5cm.              $23 39 x 26 x 12cm.            $26 40 x 30 x 19cm.            $35 Will combine as much as possible to minimize shipping costs, including other classifieds I have posted. Note that I will not respond to contact that is not made by a member of this community through the messaging system on this website. Not trying to be difficult just want to avoid scammers. With respect, Cody
categories:Sporting GoodsGuns
5470 impressions
275 views
Calgary, AB2 days ago
Photo of Brass Casing Processing and Ammunition Reloading Business
$32000
Brass Casing Processing and Ammunition Reloading Business
For Sale $32,000 obo Willing to Part Out Brass Casing Processing and Ammunition Reloading Business I have for sale my brass casing processing and ammunition reloading business venture. Due to sudden health changes, I can no longer do this and have to sell quickly. Make me an offer. I have acquired all the equipment and raw materials to get the business up and running. There is enough brass casings to provide a return of approximately 25% to 40% of capital investment, at new prices. I have purchased all this equipment new, most of it imported from the USA, from Dillion Precision and Mark 7 to name a few, paying for all shipping and import duties. Due to these sudden health changes, I am no longer able to proceed with my home based business, and I have to sell it all immediately. My plan was to do this as a hobby, and take the processed brass to gun shows, farmers markets and other local and provincial events that I could attend. Processed brass does not require a PAL to possess and/or sell/purchase. Process brass that is unloaded does require a PAL to possess and/or sell/purchase. I am an avid hunter, sport shooter, and into long range accuracy as well. I was also going to reload my own ammunition with the same equipment, so I purchased the best possible for the most accurate and reliable brass and ammunition possible. I am not selling any gun powder, primers, bullets or completed ammunition. I would like to sell this as a package to an interested party. Breaking it up may make it less enticing to an interested party, but I may sell equipment individually if there is no interest in the whole package. Most of the equipment is unused, so it is in new condition. The rest of the equipment has limited use, to verify setup parameters and test end product for SAMMI specs and accuracy, so it is in near new condition. The brass is government issued, once fired, purchased through GCSurplus auction site. If you are skilled at brass processing and ammunition reloading, and are looking to expand your hobby into a small home based business that can turn a profit quickly, with reliable top quality equipment, this is what you are looking for. I have taken most of the guess work out of sourcing the proper equipment, providing all the operating and maintenance manuals to go along with equipment, with some resource books to help perfect your product. If you are part of a gun club that likes to process brass and reload their own ammunition, this is ideal for you. Please call me to view equipment, and I can answer any questions you may have. Please be aware, this is all high end processing and reloading equipment and it is not cheap to buy new. Yes, I am looking to sell, and yes I am will to negotiate, but be aware my price is still high, but not near the price you would pay to buy new today. I am asking $32,000 or best offer. Delivery and loading assistance can be arranged. Mike Logan 587-984-5851 mikelogan33833@yahoo.ca Edmonton, Alberta area
categories:Sporting GoodsGuns
6984 impressions
1056 views
Stony Plain, AB3 weeks ago
Showing 21 of 61 records
Location
Search within
of
Categories

Other
Medical Equipment

Transportation options

Local Pickup54Can Deliver5Can Ship23