Photo of 12GA to 45ACP RIFLED Shotgun Adapter - Chamber Reducer - Stainless  NEW $110
$110
12GA to 45ACP RIFLED Shotgun Adapter - Chamber Reducer - Stainless NEW $110
Please text anytime 6476871484. Brand new 12GA to 45ACP - RIFLED Shotgun Adapter Designed for break-open style shotguns Precision machined from stainless steel This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 45ACP bullet (standard 45 Auto). This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 45ACP ammunition. After firing simply remove the adapter and tip upside down to remove the spent 45 ACP shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The 45ACP bullet side is precision CNC machined to the exact chamber dimensions to accept 45ACP ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Made in the USA on American machines Will fit any break open gun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 45ACP ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style shotguns only. The risk is that the bullet could fall out of the adapter causing a dangerous result. Also, it could damage the adapter upon ejection.
categories:Sporting GoodsGuns
25069 impressions
1904 views
Ontario10 hours ago
Photo of 12GA to 40S&W RIFLED Shotgun Adapter NEW $110
$110
12GA to 40S&W RIFLED Shotgun Adapter NEW $110
Please text anytime 6476871484. Brand new. 12GA to 357 Magnum & 38 Special - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 40S&W ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 357 Magnum or 38 Special ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 40S&W ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.
categories:Sporting GoodsGuns
22641 impressions
1478 views
Ontario10 hours ago
Photo of Swiss M1882 Service Antique Revolver, 7.5mm/32 S&W  Swiss Ordnance $43500
$4350
Swiss M1882 Service Antique Revolver, 7.5mm/32 S&W Swiss Ordnance $43500
Please text anytime 6476871484. Fully functional double action revolver in ready to shoot perfect like new condition. No PAL required. Ammo is available but sold separately. (original ammo also can be bought in stores) Comes with FRT paperwork. Tested with smokeless powder and modern ammo. Swiss M1882 Service Revolver, 7.5mm Swiss Ordnance This is a very well made revolver, based on the Chamelot & Devigne and Nagant designs, modified by Swiss firearms designer Rudolf Schmidt. The gun utilized George Abatis' unique safety which disconnects the hammer from the trigger when the loading gate is open. This allows the shooter to advance the cylinder using the trigger to quickly load or unload the chambers. The gun is in excellent condition, with 99% of the blue intact. The straw colors on the hammer and trigger are still well visible. The action is crisp and accurate, and the cylinder indexes and locks properly with zero play. The bore of the 4 1/2inch barrel is good with sharp rifling. The barrel was replaced by arsenal with newer one dated 1902 but it doesn't affect antique status of the gun. Matching serial numbers and assembly numbers. The gun is chambered for the 7.5mm Swiss Ordnance cartridge, but shooters in Switzerland frequently use the .32 S&W Long cartridge instead. Excellent overall. History & Background Swiss M1882 military revolvers are fairly scarce on the Canadian antique market. Although the arsenal at Bern produced over 37,000 pieces between 1883 and 1937, only those with a serial number below 7508 are considered antique in Canada. The M1882 was produced by both the SIG Neuhausen and the Bern factories for military use and private sale. Specimens with a serial number below approximately 20,000 were fitted with plastic grips bearing the Swiss cross. Later models would be fitted with plain wooden grips. The M1882 saw a slight re-design in the 1920’s and was re-named the model 82/29. The M1882 was in service from 1883 until the 1970’s and was carried by military, police, border patrol and home guard forces. These Swiss revolvers are usually in extremely fine condition when sold on the antique market. This can be attributed to the following two facts: firstly, Switzerland has not been involved in a war since 1847, its last armed conflict, a short-lived civil war. The second reason for the fine condition is the Swiss government’s policy to allow soldiers leaving the service to keep their side arms. Given this opportunity, most soldiers were careful to maintain and protect their guns more diligently than if it had been just an issued piece to be returned to the arsenal. The Swiss Ordonanzrevolver of 1882 is chambered for the 7.5 Swiss Ordnance cartridge, but in Switzerland the .32 S&W Long is commonly used, as it is more readily available. ​
categories:Sporting GoodsGuns
15407 impressions
1313 views
Mississauga, ON10 hours ago
Photo of 12GA to 45LC  RIFLED Shotgun Adapter NEW $110
$110
12GA to 45LC RIFLED Shotgun Adapter NEW $110
Please text anytime 6476871484. Brand new. 12GA to 45LC - RIFLED Shotgun Adapter Designed for break-open style guns Precision machined from stainless steel made in USA This is a 3 inch long RIFLED adapter This adapter gives your 12 Gauge single or double shot break open shotgun the ability to fire a 45LC ammunition. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2 3/4 12GA shell plus and extra half inch in front to make this adapter three inches long in total. It will easily fit into your break open shotgun barrel and accept any 45LC ammunition. After firing simply remove the adapter and tip upside down to remove the spent shell. This adapter has a rifled bore to increase accuracy, this in NOT a smooth bore adapter, again this adapter has a rifled bore. The cartridge side is precision CNC machined to the exact chamber dimensions to accept 45LC ammunition (SAAMI chamber specifications). Adapter orientation is not important and the adapter will work in any position. Will fit any break open shotgun with 2 3/4" or 3" chambers Perfect for 'Preppers' or your Bug Out Bags. Carry one gun and have the ability to shoot not only 12GA shells but also 45LC ammunition. Surprisingly accurate! DO NOT use in pump action or semi-auto shotguns. Designed for use with break-open style guns only. The risk is that the cartridge could fall out of the adapter causing a dangerous situation. Also, it could damage the adapter upon ejection.
categories:Sporting GoodsGuns
18832 impressions
1338 views
Ontario10 hours ago
Photo of Frank Wesson Deringer compact Pocket Pistol, .32 RF  RARE $1800
$1800
Frank Wesson Deringer compact Pocket Pistol, .32 RF RARE $1800
Please text anytime 6476871484. Fully functional antique pistol no PAL required. Frank Wesson Single-Shot Pistol, .32 RF Short/Long RARE Frank Wesson, elder brother to Daniel Baird Wesson of S&W fame was an accomplished gunmaker when Daniel was still a boy. The two younger Wessons would apprentice with their oldest brother Edwin, and learn much of their expertise from this talented and versatile master. Frank would move to California in the 1850's, probably lured by the opportunities presented by the gold rush, making and repairing guns for the local needs. By 1859 he had moved back to Worceater where he set up shop in his own name. Frank is best known for his fine rifles, "bicycle rifles", deringers and single-shot pistols. Frank Wesson never ventured into the revolver market until he had partnered with his nephew Gilbert Harrington to form Wesson & Harrington. The revolver making business continued to evolve as Wesson & Harrington first, and then Harrington & Richardson.​ This is Frank Wesson's "medium frame" single-shot pistol, chambered in .32 rim fire. It is in excellent condition, with original blue. The little lever on the bottom of the frame releases the barrel lock when the hammer is in the safety position, and the barrel snaps open as it should. It will not open if the hammer is down, or fully cocked. The bore of the3 5/8 inch barrel is excellent and bright, with sharp rifling. The rosewood grips are very fine. This is an early model of the first variant, of which only about 1000 were ever made. SN 54, excellent overall.
categories:Sporting GoodsGuns
66387 impressions
3306 views
Ontario10 hours ago
Showing 21 of 2287 records
Location
Search within
of
Categories

Other12

Medical Equipment1

Transportation options

Local Pickup2043Can Deliver291Can Ship818