As title. Let me know what you have and $$$

categories:Sporting GoodsGuns

231 impressions

20 views

Reliable Protection for Your Firearm – Perfect for Canadian Hunters Looking for top-tier protection for your rifle or shotgun? The Weather Shield Rifle or Shotgun Slicker Gun Case delivers the ultimate defence against the elements. Crafted for dedicated hunters and shooters, this case is built with a robust waterproof barrier to keep your firearm safe from rain, snow, and outdoor hazards. Its sleek camouflage design lets you stay discreet while ensuring your gear is always protected. The single, secure compartment accommodates most rifles and shotguns, preventing dings, scratches, and impact damage. Lightweight and easy to carry, this gun case is an essential companion for your next hunting trip or shooting adventure. Enjoy peace of mind knowing your firearm is shielded and always within reach. Special Deal: Pick any 5 slickers for just $125—shipping included across Canada! If you have any questions, please feel free to send me a message. Be sure to check out my other listings on Gunpost. I'm always happy to combine orders for your convenience!

categories:Sporting GoodsGuns

91115 impressions

4773 views

40 boxes of 5rnds each. Total of 200 rounds. Federal Law Enforcement low Recoil 1oz rifled slugs 1300 fps. Very accurate in most guns I've tried. In mine I can consistently get 5 rounds onto a 4x4 sticker at 75 yards. Sorry no shipping. Price is for all. Not parting out.

categories:Sporting GoodsGuns

583 impressions

41 views

Non-Restricted rifle Remington model P17, .30-06 bolt action, w/ bbl length 24" [Blued barrel and receiver. Fixed front, no rear sight. Fitted with Universal 4X32 scope. Sporterized wooden Monte Carlo stock with aluminum butt plate. Fitted with sling mounts. Marked NOT ENGLISH MAKE, logo with crown and BM on left side of receiver. Other markings include .30/06 NITRO PROOF etc. on barrel, BM logo on bolt but no serial number seen. Parts gun as receiver has a crack by the nitro proof marks. Bluing worn in use and handling areas. Two drilled and tapped holes on right side of receiver with corresponding notch removed on stock, presumably from once attached rear peep sight. Handling and storage marks on wood and metal. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code

categories:Sporting GoodsGuns

37881 impressions

2657 views

Siderlock Safety Trigger Kit. Designed to fit Glock Gen 1-4 Models: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48. Does Not Fit: Gen 5 Models. Siderlock Safety Trigger's Help Prevent Accidental Discharge!! The Glock pistol has a combination of three automatic safety features (trigger safety, firing pin safety and drop safety), which are sequentially disengaged when the trigger is pulled. The central pivot of the trigger is the first safety mechanism to disengage when the trigger is pulled and therefore the most important. The safety pin of the Siderlock trigger is a precise positioning system and when engaged blocks the movement of the central pivot avoiding an accidental discharge of the weapon. The Siderlock trigger offers the option of keeping the pistol in its original firing configuration simply by not engaging the lock. The Siderlock concept is simple: With a push on the safety pin a sliding pin acts to block or release the movement of the central pivot of the trigger, where by avoiding an accidental discharge when the slide is in the block position, and behaves exactly as the original Glock trigger when in the release position, all the while maintaining the original manufacture specifications. Once the Siderlock trigger is installed on the pistol, firing is accomplished by sliding the safety pin to the left prior to pulling the trigger. Preventing firing is obtained by simply sliding the safety pin to the right (Right hand Shooter assumed). For left-handed shooters, simply remove and invert the safety pin using the tools and instructions provided with the Siderlock trigger. No matter which position the slide is in it never extends beyond the trigger guard, avoiding any accidental contact with the holster ether inserted or withdrawn. Siderlock adheres to the same high manufacturing standards as Glock, using only high quality materials, a simple design and construction process, and therefore is guaranteed for life. Features: Replaces factory trigger. Adds an extra measure of safety. Avoids an accidental discharge. Maintains Glock original specifications, and fits all Glock Gen 1-4 models. Easy installation, includes detailed instructions and images. Ambidextrous and dismantled. High quality materials. Does NOT fit Gen 5 Models. See our complete line of Glock Products here Note: NDZ always recommends any part be installed by a qualified and trained gunsmith. NDZ promotes the use of safety practices and gear when working on any firearm. DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. Proposition 65: Click for Proposition 65 Warning Product Features Manufacturer: Siderlock Type: Trigger Safety Accessory Model: Safety Trigger Country/Region Of Manufacture: Made in USA Color: Black For Gun Make: Glock For Gun Generation: Gen 1-4 For Gun Model: G17, G17L, G18, G19, G29, G29SF, G20, G20SF, G21, G21SF, G22, G23, G24, G25, G26, G27, G28, G30, G30S, G30SF, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G42, G43X, G47, G48 Does Not Fit: Gen 5 Models

categories:Sporting GoodsGuns

15044 impressions

410 views

I have a long range setup for sale that comes with everything you will need to get into the sport, or to upgrade your existing rig. Rifle is a Savage 110BA, chambered in .300WinMag. This gun is an absolute BEAST, well built, heavy as f*ck, and in like new condition. It is has a great selection of adjustable parts, from the trigger pull, cheek rest height, butt stock pad length and base on the grip for a custom tuned shooting experience. This kit includes the rifle, scope, bipod, a supreme quality 60" drag bag, and several more additions to help your shoot go smoothly. Specs are as follows: 26" fluted barrel, 1:10" RH twist rate, threaded barrel with factory installed muzzle brake, (1) 6 rd detachable box mag, 51" o/a length, about 16 lb dry weight (rifle alone), 18" Picatinny rail system, and Savage AccuTrigger with 1.5-6 lb adjustable pull. Scope is a Barska 6-24x50mm with a sun shade, illuminated reticle and measures at 21" long. It sure does look at home mounted on top of this gun! The case is a 60" drag bag from Voodoo Tactical with backpack straps, carrying handles, many outer and inner pockets, divider for carrying 2 rifles, and almost deserves its own ad. I am selling the entire package for $2300, or I am willing to sell just the bare rifle for $1800. This gun retails for close to 3k, as shown in pics. There has been less than 50 rounds down the pipe, contributing to the like new condition it is in. Any further questions, let me know...

categories:Sporting GoodsGuns

1445 impressions

290 views

Gun stock duplicator is new custom made it is complete unit and ready to use to dupliced stock ,carving parts or more On 110 volts For sale trade consider for quality gun ,mill lathe ,honda gen or ?

categories:Sporting Goods

1675 impressions

195 views

01.Baikal MP 153 12 GA. receiver with magazine tube-SOLD 02.Browning Gold magazine tube-$80.00 03.Stoeger 2000 receiver,bolt,magazine tube,full assembly, no cocking lever-$200.000 04.Valmet over under 12 GA. receiver assembly-$250.00 05.Breda 12 GA. bolt assembly with ejector, no firing pin.-$80.00 06.Baikal MP 153 12 GA. bolt assembly top with firing pin and ejector-Sold 07.Browning Gold 12 GA. bolt assembly-$200.00 08.Remington 740/742 trigger group assembly with no safety pin.-$100.00 09.Remington 870 Wingmaster trigger group assembly-SOLD 10.Baikal MP 153 trigger group assembly-$150.00 11.Beretta AL391 Xtrema used gas piston-SOLD 12.Browning Universal Piston Assembly Browning Gold, Silver, Winchester SX2, SX3, FNH SLP 12 Gauge-$120.00 13.Browning Gold Action Spring Tube assembly-$80.00 14.Browning Gold Sleeve Bar Assembly, 12 Ga. -$40.00 15.Remington 870 Wingmaster Breech Bolt Assembly, 12 Ga-SOLD 16.Remington 870 Wingmaster Forend Tube Assembly, 12 Ga.-SOLD 17.Remington 870 Wingmaster Shell Latch Left/Right-$40.00 Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

58328 impressions

4053 views

Will BUY GUNS!!   Will buy singles, parts guns, accessories, or collections. Located in southern Alberta, but will travel if required Will pay fair prices! 403 818-0864

categories:Sporting GoodsGuns

3704 impressions

247 views

****Pls check other ads of mine for more accessories and guns**** (Order 3+ items for special deals!!) End Plates: [Pretty and functional] === $9 each (5 left) [Not pretty but functional] === $5 each (1 left) [Unused] 3 oz CNA Buffers === $19 each (8 left) [Unused] Buffer Springs === $10 each (4 left) Pickup around GTA Ship on buyer

categories:Sporting GoodsGuns

7753 impressions

807 views

SELLING AS A PARTS GUN,PROJECT OR WALL HANGER AS WITH ANY OLD GUN THIS OLD IT HAS TO BE INSPECTED BY A QUALIFIED GUNSMITH BEFORE BEING FIRED, THE RIFLING IS GOOD,THE MECHANISM HAS TO BE INSPECTED IF YOU INTEND ON FIRING IT ONE DAY. SOLD AS IS WITH NO GUARANTEE IN ANY FORM, CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

4528 impressions

339 views

I have a collection of drilling jigs, tools and parts for the building of black powder muzzleloaders: a left hand L & R flintlock lock, L & R single set trigger, tang bolts, lock bolts, eschutceon pins, tang bolts, inlays, slotted wood screws, brass and German silver inlay wire, brass side plates and castings, pistol trigger guard, trade gun buttplate, and other numerous small items. Priced out; everything would cost over $800.00

categories:Sporting GoodsGuns

871 impressions

57 views

Up for sale is a custom build Rossi 92 Stainless in 45 Colt. 16” barrel. I have added a Midwest Industries M Lok hand guard, a Ranger point precision butt stock, 2 Ranger point quivers. Will include a beautiful leather scabbard as well. Also has a leather wrapped lever. Its new never fired. All other parts are new. Also comes with original wood furniture as well. (Can be sold for $100–$150) if you don’t want it. This is the new craze now having tactical Lever guns. This set up costs around $2700 retail with taxes . So a nice discount Cash sale Price is $1800 Local Toronto/GTA (Mississauga) deal for now. Cash is king but will consider trades for… Brand new Benelli M4, Beretta 1301 tactical. Browning BLR 223 new or like new. Henry 223. New only. These are the only trades I will consider Thanks. Check out my other ads.

categories:Sporting GoodsGuns

5710 impressions

196 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19187 impressions

709 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

11913 impressions

362 views

Many Czech produced post-war Mausers were made with mostly late war and some newly produced parts. These were sold to various different militaries and on the commercial market many and of these were sold to the Israelis as well. The rifle features many late war stamped parts including the oversized winter trigger guard but does include a half size cleaning rod unlike the Kriegsmodell K98's produced by the Germans. It does not have a stock disk, as it just has a hole drilled in the butt cap for disassembly of the bolt. This particular example has a low serial number, but the serial number ranges are all over because of different contracts. The whole gun matches with the new forced match serial number. It has a scrubbed receiver, and has a beech wood stock and handguard in a nice brown color. The rifle bore is actually in very good shape, but there is some stubborn fouling stuck in there and I don't have a 32 Caliber cleaning brush to remove it but I'm sure if you use the proper brush it should come out pretty easy since it's not rust. Just shooting the rifle might even remove it. The muzzle crown is an excellent condition as pictured. The rifle does have minor some stock damage. It looks like a vice dent or some sort of hammering pattern, but it's only on the one side (pictured). Overall the gun is in very good original condition and the action is nice and smooth and it is unfired by me. This is a nice unique example of a k98 made by Brno, who is very well known for their quality produced firearms. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

15545 impressions

933 views

Please text anytime 6476871484. Brand new . $490-560 Bosnia military AC Unity BIH (aka H&K P2A1 Clone) Caliber 26.5mm These pistols were built in Sweden and other European Countries. They were built under a licensing agreement between H&K and several manufacturers. They are a 99% clone to the Heckler & Kock Flare Gun Model P2A1. The design is just slightly (cosmetic) differences All parts and components are same and interchangeable. Just like the H&K this flare gun is one of the most modern military surplus flare guns in existence, with it being lighter than most other flare guns. It is also highly desired as it is an official H&K product, which makes it desired by H&K collectors and fans of HK products. The flare gun went into production in the 80’s and is the most modern and sought after in the market today. Although no special licensing is required to purchase one of these flare guns, HK has put a lot of restriction on when and where they will sell the guns and will not even make them regularly available to their dealers.

categories:Sporting GoodsGuns

48104 impressions

5092 views

Please text anytime 6476871484. Fully functional revolver in perfect ready to shoot condition. No PAL required. Reloadable ammo is available and sold separately. Hopkins & Allen "XL No. 4", .38 RF Pocket Revolver The markings are sharp and the numbers match on the frame, barrel and cylinder. The action is strong and tight, and the cylinder indexes and locks properly. The bore of the 2 1/2 inch barrel is very good, with strong rifling. The rosewood grips are excellent and undamaged, with varnish intact. SN 289, very good overall. History & Background One of the most prolific makers in America was the firm of Hopkins & Allen. Founded in 1868 by the principals Charles Converse, Charles and Samuel Hopkins, and Charles Allen, the firm assumed the assets of the Bacon Manufacturing Company. H&A used Bacon's machinery and inventory of parts, and continued at first to make Bacon's various models before switching to cartridge revolvers and later rifles and shot guns. H&A was in business until 1915, and claimed to be the "largest manufacturers of high-grade, popular priced firearms in the world". Hopkins & Allen were well known for their pocket revolvers and Merwin & Hulbert branded large-frame revolvers. H&A are generally of a better quality and workmanship than other suicide specials.

categories:Sporting GoodsGuns

6276 impressions

435 views

Please text anytime 6476871484. Antique revolver in ready to shoot like new excellent condition ,very smooth action. No PAL needed. Comes with FRT RCMP paperwork. Ammo is available but sold separately. This one is compact concealed carry version of famous Colt M1877 "Thunderer" was made for self defense and fast action. With "bulldog" type short barre and no regular extractor on the side this revolver made for concealed carry and optimised for fast action. The action is strong and crisp, and the cylinder indexes and locks properly, without any play in the cylinder. The bore of the 2 1/2-inch barrel is excellent mirror bright with strong rifling. The black hard rubber grips are very good and undamaged. SN 82458. ​ History & Background The M1877 was Colt's first double action revolver. Colt insisted on inventing their own double action mechanism, partly because there were numerous patents for DA revolvers in effect, which Colt did not want to infringe upon, but also because they trusted their chief engineers William Mason and C.B. Richards to come up with an original design. For this reason, the M1877's action is like a Swiss clock: it is somewhat convoluted and complicated, and it has earned the nickname "the gunsmith's favorite" over time. The gun did enjoy tremendous popularity however, and was manufactured for 32 years, even after Colt had improved the mechanism and simplified it considerably in later years. The M1877 was available in three calibers - .32, .38 and .41, and was originally called "Lightning". Later collectors coined the name "Rainmaker" for the .32 and "Thunderer" for the .41. In Canada, only the .41 caliber gun with serial numbers below 107,000 is considered an antique, as the others are either exempt calibers, or made after January 1, 1898.

categories:Sporting GoodsGuns

13548 impressions

1271 views

TIPTON BEST GUN VICE ONE ONLY AVAILABLE – Consignment from an Estate – VG Condition like new – Tested NO BOX – just the vice and the owners manual ( Missing the center support piece ) Product Description • Adjusts to fit a wide range of rifles, shotguns and handguns • Ideal for cleaning and maintenance • Holds break-open guns open without disassembly • Heavy-duty nylon construction Fully adjustable to fit bolt-action rifles, break-open shotguns, tactical rifles, automatic pistols and revolvers, for cleaning, maintenance and upgrading. Three adjustable, independent supports move the length of the vice on an easy-sliding aluminum track. Holds hinged-receiver rifles and break-open guns for easy inspection without complete disassembly. Constructed of stiff, solvent-resistant nylon for years of dedicated firearm cleaning. Non-marring contact points. Quick-release cams. Innovative patch and spare part storage. Note: Not for use as a shooting rest.

categories:Sporting Goods

2733 impressions

255 views

Hey I am looking for any winchester 1893 shotguns or even just parts thanks

categories:Sporting GoodsGuns

19572 impressions

771 views