I’d like to share a few important details about the gun so you can buy with confidence: 1. Condition & history I purchased this shotgun used about a year ago from a well-known gun store in Vancouver. It was fully inspected by their gunsmith at the time of purchase and confirmed to be in excellent condition. I have personally put fewer than 350 rounds through it. The gun has always been carefully cleaned, oiled, and properly stored. ------------------------------------------------------------------------ 2. Updated ejector design (important) This is the latest upgraded version of the 690. Please note that not all 690 Black Edition models have this upgrade, but this one does. You may have heard about ejector issues on earlier 690/692 models. I had the same concern before buying, so I did extensive research. The original 690 and 692 shared the same problematic ejector design. Beretta resolved this issue with the 694, and my updated 690 Black Edition uses the improved ejector system as well. You can look up images of the ejectors used in the 694 and 692 models and compare them with the one on this gun. The 692 never received this fix, which is why it no longer appears on Beretta’s website, while both the 690 Black Edition is still listed. In practical terms, you don’t need to spend extra on a 694 to get a similar shooting experience This 690 delivers excellent quality and performance, clearly above the 686, while saving you money. --------------------------------------------------------------------------- 3. Professional Trap configuration This is the Professional Trap model with fixed chokes, so there’s no risk of loose tubes or thread damage. It’s also very easy to clean and maintain. The gun fires the first shot from the lower barrel, and the trap configuration is optimized for rising clay targets. You’ll naturally aim slightly lower than the clay, and once you’re used to it, it becomes extremely consistent and forgiving. It also features the B-FAST balance system, allowing fine tuning to your shooting style. -------------------------------------------------------------------------------------- PAL must be verified. We can split the shipping cost. Please send message to: kyle69025@gmail.com

categories:Sporting GoodsGuns

70 impressions

25 views

Used Browning Silver Feild max- 7 camo FDE, 3.5" chamber 28" barrel Comes with 3 chokes( F, IC, M), magazine plug(waterfowl), choke tool, lock, and manuals Used many days in the blinds, Shoot and operates, just cleaned. **Had some gunsmithing done to correct gas valve(see picture) cycles much better. Looking sell or trade locally. Would consider trades on small centerfire caliber rifles(223, 243), lever actions, 20 gauge semi autos, sxs or U/O. Would also add cash for right trade. Cash purchase $1250 obo One of the cheaper semi autos New retail price $1600-1800 Always heard "if you want a reliable semi-auto shotgun, stick with the 3 B's(Browning, Benelli, or Beretta)" Browning Silver Field Auric FDE 12ga 3.5" 28" inv+ - Silver Willow Sporting Club https://share.google/3HZNZeu0LDSip7JOS

categories:Sporting GoodsGuns

7628 impressions

341 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44 Double Action "First Model", .44 Russian, SCARCE 4-Inch Barrel making it suitable for self defense and concealed carry. This one is in very good condition. With the original finish remains, the markings are sharp and crisp. The action is strong and crisp, and the cylinder indexes and locks properly. The bore of the 4-inch barrel is very good with sharp rifling all the way trough. Matching numbers on the barrel, latch, cylinder and frame. The black plastic grips are very good and undamaged. SN 17122.​ History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favor of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

8152 impressions

816 views

Hi there patriotic Canadians, just a brief rundown of what kind of person I am and what I am after; fully understanding our constitutional rights is important as it completely contradicts any or most current thug like bans or officials ways of lying and trying to convince society we have no rights to own firearms responsibly it has been a right under God or a Born unto by every good Canadian who has earned the ability to responsibly use and or own any firearm within reason and certainly if we have paid our dues as those who have spent most of our lives protecting other Canadians where firearms are not used to defuse situations as it is a known fact this almost always makes things worse and more dangerous which is exactly why people like that who are responsible and understand that responsibility don’t need some bureaucrat who has never handled a firearm dictate to me or you if it’s some privilege that mommy and daddy are letting us maybe have sometimes a little; it utter nonsense we are better people and not criminals like the ones who pass these archaic “laws” and criminals making laws clearly don’t make them legal. All of this out of the way I hope I can find and deal with the right people potentially an old timer who has an older collection of my favorites like the antique 6 shooters single & double action, I have been searching for a good condition grandfathered type short barrel 38/22/44/ namely but not strictly I simply require or would like to meet or find a like minded person who is willing to part with a nice potentially original out of their collection to hand down ideally I am after makes and models like the Smith & Wesson/colt single army/Ruger and Taurus model types if we are speaking strictly collectors deep history antiques, Wanting ideally, a good .38 short revolver action that is either already no longer reg. traced or an updated 1930s-1960s model whether it a detective issue snub or a regular issue short barrel 6 shooter that still has a speed loader option or preferably a modified reconstruction and has a side gate loader for single rounds as these are the most utilitarian and essential esthetics. Good or some worn condition I’d expect in fact I prefer a good harms arm to have some wear showing it has reliability and is still fully calibrated and comes as is no need for bells and whistles just a feel good reliable piece that will out last another generation to come. If anyone is a serious owner and collector discreetness is also a right and key in this or any trade and I would hope to keep any dealings private as possible as is our God given rights as RPAL lifetime holders, my offers for a good piece and especially with its holster/belt and any extras I am open to trading some rare estate solid gold signet and precious gem men’s rings which from recent informal appraisals were multiple times the gold values even though the contents and purity are already above any nonsense from a sissy jewelry store chain. My items and rarities are very old well kept and made for a man who wants something of value for example one is a full set Blue Boulder Opal from a small family owned mine in the Australian Outback it’s one of a kind in the world and I am auctioning this one for sure again as last time it had a fins of traction I just did not get enough eyes on it and the auction slot paid for was too short otherwise I was very close to getting an extremely generous offer, but was unable to locate the bidder before it finalized such as are all silent “A”s I also have Solid gold bullion cuff that exceeds 2 ounces of 999.9 of the purest gold which can be shaped, clipped for divided uses even turned into other pieces with its content. I also have constitutional USA silver 90% dimes, and more bullion silver and some very old antique pieces going back hundreds of years. of course Cash talks and I am willing to do a straight cash deal split or show what other great items I have and own including prepper gear wonderful older leather 1800s style jackets and other small priceless artifacts such as meteor fragments and the likes. I’m sure based on my listing of potential items to trade for a decent .38 antique form revolver or something of similar greatness we can come to a more than fair even mutually beneficial trade again I respect peoples privacy and in any deals as long as it’s within our constitutional rights as the Law Abiding Canadians we are and shall always be allowed to do business at our hearts content going far back into our own heritage when trades like these were common place and no jackboot ever had a place nor legal grounds to meddle in our affairs: Remember nothing has changed we have just been told to forget. I’m not going to forget my God given rights and I hope you don’t either we all deserve them as freeborn People’s of Canada and Beyond. Please contact me as soon as you feel like throwing fisticuffs lol or just making some offers

categories:Sporting GoodsGuns

1027 impressions

76 views

Selling- custom built rifle with zero rounds fired through the barrel. All gunsmithing was done by Dennis Sorenson of Brentwood Bay, BC. Selling for a fraction of what it cost to build this rifle.* Reduced, now $4995.00 , plus shipping. * Sorry, no trades or CODs. E-transfer preferred. The build-- Defiance Deviant Tactical , long action, .532" bolt face, right bolt, right eject, heavy tang, 20 MOA stainless rail , tactical bolt knob, deep flutes, 071" firing pin, faceted bolt shroud. McMillan Game Warden Ultralight, olive green in color , with an adjustable cheek piece. H.S.Precision bottom metal with one H.S. Precision Generation 2 detachable magazine. Bartlein 5R target crowned stainless heavy barrel, new and unfired, 11.25" twist, 25.5" in length. Remington 40X trigger, (no safety) set at 16 ounces. The following accessories are available for this rifle at additional cost. Let me make you a package deal. Timney #510 trigger with safety, a second H.S. Precision generation 2 magazine, 50 rounds of new Atlas Development Group ( ADG ) brass , a full box of 100 Berger VLD 210 grain bullets, and a set of RCBS full length sizing dies with shell holder.

categories:Sporting GoodsGuns

3470 impressions

220 views

Selling- Sako 85 Finnlight chambered in 300 Winchester Short Magnum. This one owner gun has fired less than 200 rounds since purchased new, Features include a 26.5 inch stainless fluted sporter weight barrel with a 1 in 11 " twist , a gunsmith installed radial muzzle brake, a set of Sako one inch medium height scope rings, one Sako four round magazine, a Sako bolt disassembly tool, and the original owner's manual. Reduced, now $2095.00 , plus shipping. Sorry, no trades or CODs. E-transfer preferred. The following accessories are available at extra cost-- Redding Competition seating die, resizing dies, a second brand new Sako stainless magazine , and 50 pieces of Norma brass.

categories:Sporting GoodsGuns

4959 impressions

237 views

PLEASE READ CAREFULLY: You must obtain a letter of exemption from the CFO of your province in order to buy a handgun in Canada as of October 21, 2022. - SMITH & WESSON Model 2206 /22 lr caliber has a solid stainless steel frame, ss slide and barrel - MINT CONDITION /like new in original box / A TRULY SUPERB TARGET PISTOL! - 6 inch /152mm long barrel with Target-Crowned Muzzle - The barrel is milled into the bottom of the pistol's frame, giving it an EXTREMELY low bore axis, thus, creating virtually no muzzle-rise with each shot fired - Very light, short and crisp trigger pull with adjustable over-travel set-screw behind the trigger - Barrel and front sight do not move when the slide reciprocates, making it very accurate with fast follow-up shots - Fully adjustable rear sight for windage and elevation with LONG sight radius, for better accuracy - 4 (10 rnd) steel, extremely reliable S&W magazines - Takedown tool, Rear sight adjustment S&W screwdriver - Spare extractor, springs and retainer pin (included) from the factory - Instruction Manual - Weight 39 oz /1106 g unloaded UPGRADES: 1- Trigger Job by Gunsmith to lighten the trigger pull 2- Professionally dehorned edges by Gunsmith (all sharp edges have been slightly rounded) 3- Modified 1/8 inch grip inserts (installed) to improve the overall grip and feel 4- Stainless steel allen head GRIP screws (lengthened & installed) 5- Grip tape (installed) Note: Serial Number has been blacked out in all photos

categories:Guns

34591 impressions

3495 views

Little Badger Rifle Parts — Receiver with screws Many other little badger parts available All parts are sold as is and should be installed by A licensed gunsmith Includes : Receiver & 2 assembly screws Condition : New Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature

categories:Sporting GoodsGuns

2351 impressions

352 views

For sale is a Marlin Model 336W lever-action rifle in .30-30 Win. It has an XS Lever Scout picatinny rail for mounting optics. It also comes with a hammer extention installed. It has a hooded front sight. There are a few minor marks on the stock from normal use. It has recently been serviced and tuned by a professional gunsmith. The action is super slick!

categories:Sporting GoodsGuns

11818 impressions

510 views

Howdy there Townpost! I have another custom 12 Gauge delight for you to take a gander at! This is a custom-made one of a kind Ithaca M37 Featherlite put together by my gunsmith for me. As pictured, the overall length is 30 inches long and has a barrel length of 18.5 inches. It weighs 5 lbs, 7oz unloaded, so Featherlight is definitely even more apt than this when this thing was full length. Some fairly extensive work was done. Most notably the barrel and stock were cut down and reshaped the muzzle crown was nicely dressed with file work and reblued and it's nice, smooth and square to the barrel. The original red Ithaca fibreoptic front bead site was reinstalled at the new muzzle. The stock bolt with shortened and a nice decorative cast pewter medallion was added to the butt of the stock to cover up the bolt hole and add very nice piece of decorative flair. And sling swivels were added so this can carried around on sling. The action is very smooth the action release locks up properly, and the spring on it is in good condition. And it slam fires without a problem. What is slam fire you may ask? It means you can hold down the trigger and work the action and every time you close the action with the trigger held down the gun will fire. The gun will fire as fast as you can work the action. So needless to say it's pretty fun to shoot.  This would make an excellent hiking, camping or backpacking shotgun for predator defense in my opinion. Or if she just want a sawed-off shotgun that you can slam fire this is the gun for you. Ithaca started making short versions of the M37 for law enforcement called the Stakeout I believe those were mostly in 20 gauge and they came out sometime in the 70s or '80s. Inland Manufacturing to this day makes something similar to this called the Stakeout II for the US market with an MSRP of $750US. Short versions of the M37 have appeared in a lot of media, probably most notably is the shotgun in the movie Aliens where it's used for "close encounters". There's a well documented cut down Ithaca Featherweight by a Navy SEAL who put a duckbill spreader on it, put a magazine tube extension so that it held 8 and cut the stock off in much the fashion that this one is. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's very short when broken down, and light so it should be cheap to ship. PAL is a must!

categories:Sporting GoodsGuns

4480 impressions

358 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

23221 impressions

820 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

13864 impressions

778 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

14319 impressions

485 views

Red Dot mount for Win 94 lever gun. This is the cleanest and easiest way to add a red dot to your rifle. If you have the AE version use two bolts to secure via the front scope mount holes. If not, any competent gunsmith can drill/ tap two  holes easily.  fits RMR footprint,  (2) available,  $100 shipped.  *please see my other ads*  

categories:Sporting GoodsGuns

9481 impressions

225 views

Winchester 9422M XTR 22 Magnum,20 inch barrel with little bulge on a end, excellent wood, Winchester butt plate, bore bright and shiny. Some minor marks. Very good condition. Recommended Repair Options: 1.Barrel Relining: A common and often affordable fix for .22 LR rifles is to have the barrel relined, which involves installing a new, smaller-diameter rifled tube inside the existing barrel. 2.Barrel Replacement: In some cases, the barrel may need to be entirely replaced. 3.Counterboring: If the bulge is very close to the muzzle end, a gunsmith might be able to counterbore the barrel (ream out the bulged section from the muzzle) and re-crown it, provided the resulting barrel length is legal and safe. No trades and not taking offers. Local is preferred, but will ship at buyers expense. Further Lost insurance can be purchased by the buyer. Valid Pal a Must and will be verified for reference number. Please send message to: medal1958@gmail.com

categories:Sporting GoodsGuns

9565 impressions

1367 views

Attention Anschutz shooters- here's a rare find. Selling a rear micrometer diopter sight for Anschutz .22 target rifles. This sight slides onto the existing dovetail, no gunsmithing required. - Reduced, now $175.00, plus twenty dollar shipping anywhere in Canada.* Sorry, no trades or CODs. E-transfer preferred.

categories:Sporting Goods

1968 impressions

259 views

Please text anytime 6476871484. Fully functional antique revolver in mechanically perfect and ready to shoot condition ,very good action, no PAL needed. Reloadable ammo is available but sold separately Comes with FRT RCMP paperwork. Smith & Wesson 44New Model No. 3 Top Break, .44 Russian Revolver This one is in very good condition. The the serial numbers match . The action is strong and accurate, and the cylinder indexes and locks properly. The bore of the 6-inch barrel is quite good, with strong rifling. The black hard rubber grips are good and undamaged. Mechanically in excellent condition with proper timing and lockup. The latch is also solid with zero play. Extractor works as it should. SN 5819, very good overall. History & Background Smith and Wesson's first double action design dates back to at least 1872 - years before Colt ever attempted a double action cartridge revolver. It was mentioned in a letter to the Russian envoy General Orlof, and although the sale to Russia never materialized, it served to pave the way for the very popular and successful line of double action top break revolvers. The .44 Russian model was actually the first to be produced as a prototype, and the last to be released for sale to the public. For this reason there exists a degree of confusion over the proper terminology: the first one to be manufactured for sale was the .38 caliber model, followed by the .32. The .44 caliber model was not released until 1881, and is variably known as the No. 3 Double Action, the Double Action "Navy" (a name Daniel Wesson wanted to keep alive to differentiate this model from the No. 3 single action, and still holding out hope to sell it to the Russian navy), and the First Model Double Action. Originally, the .44 Double Action was made with a 1 7/16 inch cylinder, however an optional .44-40 version was available as of 1886. This required a 1 9/16 inch cylinder, and a longer frame. The firm soon realized that it was too expensive and cumbersome to manufacture two different sizes of frames for what was essentially the same gun, and the shorter cylinder and frame were dropped in favour of the longer one in the early 1890's. The No. 3 frame .44 double action top breaks were dropped from the Smith and Wesson catalogue in 1913.

categories:Sporting GoodsGuns

12916 impressions

519 views

Please text anytime 6476871484. Fully functional double action revolver in perfect ready to shoot condition. No PAL required. Test fired with smokeless powder. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Colt M1892 "New Army" Revolver has significant improvements over M1889 with better locking and indexing mechanism. This one is in excellent condition. The nitre blue on the trigger and hammer is well visible and retains 95% of original blued finish. The action is strong and accurate, and the cylinder indexes and locks properly with zero play on trigger pull. The bore of the 4 1/2 inch barrel is excellent and mirror bright with perfect strong rifling. The markings are sharp and defined throughout. Extractor working as it should. The assembly numbers on the cylinder, crane and frame. The original grips are good and undamaged.​​ S/N 13345 History & Background This model is an important milestone in Colt handgun development, as it is the first American revolver with a swing-out cylinder mounted on a crane, a development which would become the standard for modern revolvers to this day. The 1889 cylinder mechanism was already "on the books" as early as 1880, based on designs of Colt engineers William Mason, C.J Ehbets and Horace Lord. It would take almost ten years for Colt executives to give the green light to manufacture this gun, and once it was available, the US government quickly took notice and ordered several thousand for the Navy. Colt adopted the name "New Navy" in honor of this order. The gun has an interesting counter-clockwise cylinder rotation and a locking mechanism which relies entirely on the two-pronged hand.The 1889 model would remain in production for 18 years, with significant improvements in 1892, 94, 95, 96, 1901 and 1903. When it was first introduced in 1889, it met with no competition from the other major makers - Smith & Wesson were still heavily engaged in manufacturing top-break revolvers, and Remington only had their solid frame revolvers with removable cylinders to offer. It would take S&W another ten years before they had a viable alternative to Colt's design.

categories:Sporting GoodsGuns

18489 impressions

1066 views

Please text anytime 6476871484. Fully functional double action revolver in perfect condition. Compact pocket revolver high quality and can fit in the palm of your hand.. No PAL required. Comes with FRT paperwork. Reloadable ammo is available but sold separately. Iver Johnson "American Bull Dog", .38 RF short and long Revolver Iver Johnson was one of the most prolific makers of pocket revolvers in America, from 1871 to nearly the present. One of the earliest makers of bulldog-type, double action revolvers, the Iver Johnson American Bull Dog is well known and in demand. These were made by Johnson's and the relief grip showing the American eagle on a shield is typical of Johnson's ware. ​ This one is in very fine to excellent condition, with 99% original nickel. The action is accurate and strong, and the cylinder indexes and locks properly with no play. The bore of the 2 1/2-inch barrel is good with strong rifling throughout. The black hard-rubber grips are excellent and undamaged. SN 2407, excellent overall. History & Background Iver Johnson (1841-1895) was a Norwegian gunsmith who came from Bergen to America in 1863. He found work immediately at Ethan Allen's factory in Worcester, Mass. where he met Martin Bye. Johnson worked at Allen's through the civil war years, as demand for firearms was high, and work was plentiful. By 1871 Johnson and Bye had decided to venture out on their own and founded Johnson Bye & Co. in Worcester, moving to Fitchburg by 1891. In 1883 Martin Bye left the company, selling his interest to Iver. The company name was changed to its most famous form, "Iver Johnson's Arms & Cycle Works, Fitchburg, Mass.", a name it would retain until the outbreak of the First World War. Iver Johnson did not only produce a large variety of firearms, they were also famous for their excellent quality bicycles and motorcycles. The company would remain in business until 1993. The name was "revived" in 2006 and the brand is still used today.

categories:Sporting GoodsGuns

11882 impressions

536 views

Please text anytime 6476871484. Antique revolver in ready to shoot like new excellent condition ,very smooth action. No PAL needed. Comes with FRT RCMP paperwork. Ammo is available but sold separately. This one is compact concealed carry version of famous Colt M1877 "Thunderer" was made for self defense and fast action. With "bulldog" type short barre and no regular extractor on the side this revolver made for concealed carry and optimised for fast action. The action is strong and crisp, and the cylinder indexes and locks properly, without any play in the cylinder. The bore of the 2 1/2-inch barrel is excellent mirror bright with strong rifling. The black hard rubber grips are very good and undamaged. SN 82458. ​ History & Background The M1877 was Colt's first double action revolver. Colt insisted on inventing their own double action mechanism, partly because there were numerous patents for DA revolvers in effect, which Colt did not want to infringe upon, but also because they trusted their chief engineers William Mason and C.B. Richards to come up with an original design. For this reason, the M1877's action is like a Swiss clock: it is somewhat convoluted and complicated, and it has earned the nickname "the gunsmith's favorite" over time. The gun did enjoy tremendous popularity however, and was manufactured for 32 years, even after Colt had improved the mechanism and simplified it considerably in later years. The M1877 was available in three calibers - .32, .38 and .41, and was originally called "Lightning". Later collectors coined the name "Rainmaker" for the .32 and "Thunderer" for the .41. In Canada, only the .41 caliber gun with serial numbers below 107,000 is considered an antique, as the others are either exempt calibers, or made after January 1, 1898.

categories:Sporting GoodsGuns

14681 impressions

1351 views

Please text anytime 6476871484. Fully functional antique revolver in ready to shoot like new condition. No PAL required. Comes with 2 moon clips for 45ACP, 1 adapter for .455 Webley and FRT RCMP paperwork. Webley MkI* British Service Revolver Navy .45ACP/45 Auto/ 455 Webley. The this one was checked and tested for smokeless powder by gunsmith and has NP proof mark. This one was professionally modified to accept 45auto rim and .45ACP cartridges on a moon clip and also can be used with original .455 Webley ammo. The gun is in like new condition with everything tight and working like a Swiss clock and plenty of the original blue remaining. The action is accurate strong and very smooth. The cylinder indexes and locks properly without any play. The bore of the 4-inch barrel is good and mirror bright, with sharp rifling. The grips are excellent and undamaged. SN 33645, very fine overall. History & Background Philip Webley & Son began making top break, hinged revolvers as early as 1880, with the Charles Pryse patented design they acquired for use on their Webley-Pryse revolvers. Soon thereafter an improved locking mechanism by Michael Kaufmann produced the Webley-Kaufmann design, followed by Webley's own improved "Government" model, or "WG". It was not until 1887, when the British military hoped to replace the Enfield revolver that the first "Mark" revolver model was introduced. The Mk I was soon followed by the MkII (1894), then III (1897), and eventually as many as six variations were made, between 1887 and 1949. The Webley top break "Mark" revolvers were probably the single most widely used side arm in the world, and were still in service as late as the 1970’s.

categories:Sporting GoodsGuns

15162 impressions

2695 views