FISHING EQUIPMENTS 1. 23 FISHING RODS 2. 5 FISHING ROD CASE 3. 3 WATERPROOF OVERALLS,JACKETS AND BOOTS. 4. 10-Fishing Lures Kit Fishing Tackle Box with Tackle Included. 5. 2 Float Tubes for Fishing and Angling. 6. Ice Fishing Mora Hand Auger. 7. 2 Rubber Fishing Nets. And more, some items pictures I can not uploaded because 10 only limit, if you interested you can come and check everything. Asking price for everything 1100$. Everything is in good conditions. Must sell everything together, not separately.

categories:Sporting GoodsFishing Tackle

279 impressions

30 views

For Sale - Lee Precision 6.5x55 Swedish Mauser full length 2 die set w/ crimp die included $80 - firm! Brand new in box - Contains: -full length sizing die -crimp die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box EMT(shipped) or cash (pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense via Canada Post within Canada only. Small package/tracked to all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is still up then item is available.

categories:Sporting GoodsGuns

20002 impressions

693 views

For Sale - Lee Precision 218 Bee steel full length sizing 2 die set + crimp die $80 - firm No trades or offers 1 set available Brand new in box - Contains: -full length sizing die -bullet seating die -crimp die -powder scoop -shell holder -data, load chart, and instructions -handy red box Payment by EMT(shipped) or cash(pick up) - Pick up available by appointment only (cash), house drop box or shipped at buyers expense within Canada only. Small package/tracked, all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas. If this ad is up then item is still available

categories:Sporting GoodsGuns

12888 impressions

567 views

Selling - Weatherby MK.V deluxe chambered in .300 Weatherby Magnum. This rifle was manufactured at the South Gate, California plant in 1969 and includes the original factory three shot test target. Serial number P39277. The Weatherby features an FN Mauser action , rare left hand bolt action , a 24 inch German made Weatherby barrel , a custom bedded stock, a hinged magazine, and much more. This rifle sells with a leather hunting sling and a set of Weaver mounts. Judging from the condition of the barrel and the internals I would say that not a lot of rounds have been fired through this rifle since new. Reduced, now $1650.00 , plus shipping. Sorry, no trades or CODs. E-transfer preferred. try and find a nicer Mk. V for the money--

categories:Sporting GoodsGuns

4098 impressions

289 views

This is a new, very nice, compact shot timer for IPSC, USPSA, IDPA. Use it for range practice to hone your timing. Comes with a black silicon case and lanyard. Frequently on back order. I finally got one just before I had to give up shooting. I can ship in Canada for $21. Features from their website: - Compact, ergonomic design - Clear and informative display with largest time digits - Uses any off-shelf batteries (AAA) - Up to 17 days of continuous match use on a single set of regular batteries. Even if they are close to depletion, you still have enough time to comfortably finish your match - Simple, straight forward, intuitive interface with only 3 navigation buttons, one hand operation - Loud beep: 105dB, 1.5kHz for those who have trouble hearing high frequency tones - Adjustable beep volume - Digitally adjustable sensitivity, you can pick up anything, 9mm, .22 cal, AR, Shotgun, PCC, CO2, hammer fall, striker fall, suppressed, you name it, it will hear anything - Instant or Delayed start - Multiple Par times - Presets - Durable design - 3 strings memory - Ability to display 3 strings simultaneously to compare shots - Auto Power off - Up to 10 minutes long string time, so you can time those long 3-gun stages - For over a year every aspect of design was tested extensively in the field by differents shooters, at different ranges, with different guns, different ammo, at types of matches - Made in USA

categories:Sporting GoodsGuns

1444 impressions

69 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

16218 impressions

478 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

15492 impressions

867 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:Sporting GoodsGuns

57980 impressions

1370 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

17224 impressions

833 views

Howdy Townpost! I've got an Italian jewel for you to take a look at here. This is an Italian Bodeo model 1889. These guns are among my favorite antique revolvers. They are a very simple rugged and easy to maintain and repair Military revolvers with one of the coolest safety/loading systems as part of its design. These revolvers are very well designed, and feature the safety, loading/unloading system called the "Abadie System". This system was designed in Portugal, but many European late 19th century designs incorporated it. This particular example is an 1897 production by Glisenti at Brescia. Glisenti made Bodeos from 1891 to 1906. This is considered a tipo (type) A or an enlisted model. The type A had a folding trigger which was considered safer and was issued to enlisted men and the type B was the officer's model and had a trigger guard. This particular gun is considered a late model because it has an internal hammer block safety, which is dovetailed into the hand (pictured). The early model had a external hammer block safety that was prone to breakage. I've personally seen multiple antique examples with broken external hammer block safeties. So it was a good move from a design standpoint to change. The early models also were finished in the white in a similar manner to the French model 1873 Chamelot-Delvignes were. This example is of course blued like the overwhelming majority of the late models. This revolver is in excellent condition mechanically and has minimal wear overall. The grips are in excellent condition and we're refinished professionally. The chambres and bore are in excellent & minty condition as well. And the bore itself is one of the best I've ever seen on a Bodeo, with clean, sharp and shiny lands and grooves. This revolver chambres the 10.35mm Italian ordinance cartridge. This cartridge is very similar to .44 Russian but has a smaller diameter bullet (.422) and a slightly tapered chambre. I have seen these shot with .44-40 bullets that are .427 in diameter. These revolvers were loaded with smokeless from the get-go in 1890 using ballastite, a smokeless propellant. For an additional fee on top of the price I can have the chambres slightly reamed so that they will accept .44 Russian cartridges. That way you can buy an off-the-shelf ammunition without the need to hand load. However these are quite easy to hand load and source components for. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

16245 impressions

486 views

Howdy Townpost. I am selling this Remington 3.5inch Super-Mag that I picked up from BassPro in Calgary. I never got around to shooting it but I got a deal on it so I'm willing to let it go for cheaper than usual. This was a store demo gun, which essentially means it was dry cyled and shown to customers a few times. It's more or less a brand new shotgun. There's hardly any wear on it with the exception of some cosmetic blemishes from some small patches of surface rust that formed on the parkerized receiver. I suspect they never oiled it and peoples hands or just some moisture caused it. I cleaned it off and oiled the whole gun. It's pretty smooth even though it's a new gun and hasn't been broken in. The rubber recoil pad is still nice and soft The date code looks like AJ so it's a 2015 production. It was kicking around BassPro for almost 11 years! These regularly retail for $750+tax but occasionally go on sale for $650+tax. So I think $630 with no tax is not a bad deal for an essentially brand new shotgun. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

6619 impressions

312 views

*Price reduction fro a quick sale* This is a High Condition 1944 BSA selected to be upgraded into a "T" pattern sniper rifle with correct "TR" marking on the left side of receiver ring. These sniper rifles were based on hand selected No. 4 rifles and saw service with Commonwealth forces during WWII and into the 1960s. In addition to the rifle's standard protected blade front sight and ladder rear, Scope is a No. 32 Mk. II OS. 1650A & mounted on a quick detach base. Scope is dated 1944 and numbered "15803"which is matched to the rifle with the same number force matched on the wrist(see photo). Cast scope base is a high quality reproduction(Roger Payne replica) and was Matched 3522 to same as on the bolt and rifle. Walnut stock with cheek piece, "S51" also stamped behind the grip indicating the rifle is a wartime conversion by famed gunmaker Holland & Holland. CONDITION: Very Good. Metal retains the vast majority of its arsenal applied finishes with some fading. Stocks show small nicks and impressions throughout as is to be expected on military issue arms. Good, strong grooves and bright bore. Scope is original and is still very clear for it age. Also included as an original green metal scope case for securing the scope. However, the numbers on this case are not matching the scope.. Barrel Length: 25 - 1/2" Caliber/Bore: .303 BSA Model: No. 4 MK 1* (T) Serial Number: D3522. Also comes with a Chest S.A. No15 Mk1 - Transit Chest for the Lee Enfield No 4T Sniper Rifle. Overall I would give the condition a 9/10. This world make an excellent addition to any collection. This is truly the Rolex of British sniper rifles!) If you are looking for something very rare only 21,617 rifles were converted by Holland and Holland from 1942-1946. Can ship anywhere in Canada, Please see my other ads for rare and collectable firearms and accessories

categories:Sporting Goods

11774 impressions

977 views

HANDY ROTATING 16 GLASS JAR STORAGE ORGANIZER FOR SALE. FEATURES 16 8 oz. GLASS STORAGE JARS ON A ROTATING STAND. PERFECT FOR SHOP , CRAFTS ROOM ,SEWING ROOM , OR PANTRY.

categories:Household Items

3985 impressions

391 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:Sporting GoodsGuns

7574 impressions

513 views

Type : Rifle Action : Single    Barrel length : 22 inch  shot perfectly The delivery service made by Canada Post is available for purchase for 50  $ .  The delivery address must absolutely be the same as on the firearm license. A signature and an identity document will be requested at the reception at the post office. Before shipment, this information will be requested: - Name - Address - PAL Number - Date of birth - Telephone number - Email Address - two photos from a government identity card or a conference video that will prove the buyer's identity (RCMP regulations since 2022) The PAL will be checked and an RCMP reference number will be requested.

categories:Sporting GoodsGuns

689 impressions

73 views

For Sale - one Lee Precision 38-55 Win. full length steel reloading dies, BNIB - complete set (no crimp die included) $85 - firm! No trades or offers Brand new in box - new manufacture -full length sizing die -bullet seating die -expanding die -powder scoop -shell holder -data, load chart, and instructions -handy red box & lubricant If you want a crimp die also, contact me as one is available for sale...a must have for blackpowder reloaders and for rifles with tube magazines. EMT (shipped) or cash(pickup) - pick up available by appointment only, house drop box or shipped at buyers expense within Canada only Small package/tracked, all provinces - $22 (small box) Text or email only / unable to answer calls in remote areas

categories:Sporting GoodsGuns

22880 impressions

979 views

For Sale - Lee Precision 44 Russian Full Length Carbide Sizing 3 Die - no crimp die included $90 – firm! Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box The resizing die is carbide and is self lubricating, there is no need for resizing lube when resizing your casings with this die set. EMT or cash - Pick up available by appointment only, house drop box or shipped at buyers expense via CP within Canada only. Small package/tracked to all provinces - $22 (small box) Text or email only. No trades or offers If this ad is still up then item is available.

categories:Sporting GoodsGuns

9591 impressions

949 views

For Sale - Lee Precision 30/40 Krag steel full length sizing 3 die set - crimp die is included $80 - firm 1 set available Brand new in box - Contains: -full length sizing die -expanding die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box The resizing die is steel and is not self lubricating. Payment by EMT(shipped) or cash(pickup) - Pick up available by appointment only (cash), house drop box or shipped at buyers expense within Canada only by Canada Post. Small package/tracked, all provinces - $22 (small box) Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

14854 impressions

648 views

For Sale - Lee Precision 25-35 Win steel full length sizing 2 die set $75 - firm 1 set available Brand new in box - Contains: -full length sizing die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box & Lee lubricant There is no crimp die that I can find for this die set...might be able to use a 25-20 Win crimp which I have. Payment by EMT(shipped) or cash(pick up) - Pick up available by appointment only (cash), house drop box or shipped at buyers expense within Canada only by Canada Post. Small package/tracked, all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is up then item is still available.

categories:Sporting GoodsGuns

15021 impressions

494 views

For Sale - Lee Precision 6mm Remington / .244 Remington full length 2 die set + crimp die included $75 - firm! Brand new in box - Contains: -full length sizing die -crimp die -bullet seating die -powder scoop -shell holder -data, load chart, and instructions -handy red box EMT(shipped) or cash (pickup) - Remote pick up available by appointment only, house drop box or shipped at buyers expense within Canada only via Canada Post. Small package/tracked to all provinces - $22 Text, email, or leave message / unable to answer calls in remote areas. No trades or offers If this ad is still up then item is available.

categories:Sporting GoodsGuns

15866 impressions

556 views

I have for sale 2 handmade Japanese knives that were purchased in Edmonton at Knifeware and have been professionally sharpened only by them. They are in amazing condition. Knives are made by Tojiro by Yoshikane and are as follows 210mm Yanangiba = $275 180mm Deba - $275 Both for $500

categories:Household Items

975 impressions

245 views