$1050
Brand new EOTECH EXPS2-0 GREEN 68 MOA Ring & 1 MOA Dot with QD Mount $1050Brand new
Model Number: EXPS2-0GRN
Night Vision-Compatibility: None
Water Resistant: Submersible to 10ft. (3m)
Mount: Quick-detach lever fits both 1 Weaver and MIL-STD-1913 rail
Power Source: One 123 lithium battery
Battery Life: 600 continuous hours at nominal setting 12 at room temp.
The EXPS2 offers true 2-eyes-open shooting and provides an unparalleled targeting experience.
The all-purpose EXPS2 features easy-to-adjust side buttons and a quick-detach lever.
It has a transversely-mounted lithium 123 battery.
The increased height of the EXPS provides iron sight co-witness access in the lower third of the viewing window.
Whether you’re using the sight for law enforcement or hunting, the EXPS series sights are the premier optics in the line.
categories:Sporting GoodsGuns
3376 impressions
408 views
Calgary, AB1 day ago
$920
Brand new EOTECH EXPS3-4 AR223 Ballistic Reticle with QD Mount $920Brand new
Model Number: EXPS3-4
Water Resistant: Submersible to 33 ft. (10 m) depth
Mount: 1” Weaver or MIL-STD-1913 rail
Brightness: 20 daylight settings,10 additional settings for Gen I through III+ night vision devices
Power Source: 1 x 123 lithium battery
Battery Life: 600 continuous hours at nominal setting 12 at room temp.
The “E” is for “Extreme.”
The EXPS3 offers true 2-eyes-open shooting and a 7 mm raised base that still allows for iron sight access.
It features easy-to-adjust side buttons and an adjustable, locking, quick-detach lever for easy attachment and removal.
It is also the optic of choice for the technologically advanced modern rifle hunter.
Its night vision-compatibility makes it a versatile choice for day or night hunting.
categories:Sporting GoodsGuns
3774 impressions
429 views
Calgary, AB1 day ago
$200
Brand new Mastermount Rear Biased Optic Mount $200Brand new
Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g.
The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself.
It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA.
Dual-Axis Locking
AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis.
The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis.
These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability.
Low Axis Over Bore
The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed.
The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained.
Built Rugged As the AK Itself
The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics.
Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking.
No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release.
Accessory Side Rail
Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories.
Compatibility
The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder.
Greater Optics Versatility. Superior Finish.
A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base.
The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.
categories:Sporting GoodsGuns
5332 impressions
523 views
Calgary, AB2 days ago
$950
Brand new EOTECH EXPS3-2 68 MOA & 2 MOA Ring – NV Single QD Lever-Black $950Brand new
Model Number: EXPS3-2
The “E” is for “Extreme.”
The EXPS3 offers true 2-eyes-open shooting and a 7 mm raised base that still allows for iron sight access.
It features easy-to-adjust side buttons and an adjustable, locking, quick-detach lever for easy attachment and removal.
It is also the optic of choice for the technologically advanced modern rifle hunter.
Its night vision-compatibility makes it a versatile choice for day or night hunting.
Night vision: Compatible
Length/Width/Height: 3.8” x 2.3” x 2.9” (96.5 x 58.4 x 73.7 mm)
Weight: 11.2 oz (317.5 g)
Water Resistant: Submersible to 33 ft. (10 m) depth
Mount: 1” Weaver or MIL-STD-1913 rail
Brightness: 20 daylight settings,10 additional settings for Gen I through III+ night vision devices
Power Source: One 123 lithium battery
Battery Life: 600 continuous hours at nominal setting 12 at room temp.
categories:Sporting GoodsGuns
3418 impressions
402 views
Calgary, AB2 days ago
$1299
A Pair of 308's THE BLR IS SOLD SOLDTop 1 is a Savage model 99C iron sights and factory drilled for Scope premium Condition $1299 Bottom one is a Browning BLR C/ W 3 X 9 X 44 Tasco world class plus Scope Excellent condition $1399 TEX or Phone
categories:Sporting GoodsGuns
24902 impressions
2545 views
Yorkton, SK2 days ago
Showing 21 of 134 records
