Churchill 206 Over Under 12 Gauge Shotgun, 28 inch Barrel, 3.5 inch Chamber, Max-5 Camo A16151 Reduced from 999.99$ to 899.99$ Condition : new Tax rates shipping into your province NB, PEI, NS, NL, all pay 15% Ont, pays 13% Everybody else pays 5% GST only contact john at Doctor Deals 506-855-5377 e-transfer only Shipping through Canada Post, 18+ Signature Warranty available Specification & Features Model : Churchill 206 Max-5 Camo Item code : A16151 Gauge : 12ga 3.5″ (89mm) Stocks : R.Tree Max-5® Camo Receiver : Steel, black finish Barrel finish : R.Tree Max-5® Camo Trigger : Single selective Ejection : Auto ejectors Safety : Auto Chokes : 5 mobile chokes Sights : 7mm vent rib, fiber optic sight Barrel lenght : 71 cm (28″) Barrel options : 66-71-76 Length of pull : 365 mm Drop at heel : 55 mm Drop at comb : 35 mm Overall length : 121 cm Weight : 3.20 kg About Akkar It was the year 1985 when Akkar was first founded as a small manufacturing facility in Istanbul that focused entirely on producing parts for the shotgun and automobile industries. Doors to the international gun industry became wide open shortly after it started producing and distributing the first pump-action and gas-operated semi-automatic shotguns, Altay, in 1992. This unarguably paved the path for other Turkish gun manufacturers to establish business deals with American Colleagues and elsewhere around the world. Along the way, Akkar partnered with other names and began producing break open shotguns under its own Churchill brand. When its lightweight 206 series launched in 2005, with its classical look and ergonomic features, the Akkar brand was propelled into the mainstream of gun manufacturers. Its reputation was assured with the arrival of the Mammut 300 series, the much-talked-about threebarreled shotguns. And in 2012, Akkar introduced the 800 series, which furthered their momentum in the international gun market. Today Akkar’s shotgun collection includes a well-balanced offering of sporting, hunting and tactical designs that are produced in different gauges and calibers under 14 registered trademarks including Mammut®, Churchill®, Altay®, Karatay®, Maxi-Mag®, M-2000®, Armstrong®, Apache®, Komanchi®, Poseidon® and Polaris®. Akkar’s production ethic proudly follows The Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) standards and also tested and recognized by CIP (International Proof Commission) standards for being compatible with steel shots as environmental awareness is rapidly rising against lead pellets polluting the nature.

categories:Sporting GoodsGuns

14703 impressions

821 views

BLUE HELIO C2 18.5 " QUALITY HIGH END WHEEL CHAIR FOR SALE. VERY LIGHT WEIGHT CARBON FIBER CONSTRUCTION. SEAT MEASURES 18.5 " WIDE X 20" DEEP X 17"- 20" HIGH WITHOUT CUSHION . ADJUSTABLE SEAT HEIGHT . FEATURES INCLUDE: SEAT BELT , CUSTOM JAY SHELL BACK CUSHION ,ANTI TIP OVER RODS , REMOVABLE REAR WHEEL AXLES (BY PUSHING CENTER HUB BUTTON) , SWING BACK REMOVABLE CHAIR SIDES , ADJUSTABLE CASTERS AND FRAME WHEEL LENGTH , SWING AWAY REMOVABLE FOOT RESTS WITH FOOT STRAPS , HEIGHT ADJUSTABLE ARMS , AND SUPRA CORE STIMULITE SEAT CUSHION. COSTS APPROX. $3,000 NEW.

categories:Medical Equipment

68 impressions

11 views

42"X60" expandable oak table with 6 chairs. Comes with 2-18" leaf's which store under the table. Great when family and friend come over. Can remove the top for easer transportation.

categories:Household ItemsFurnitureTable and Chairs

356 impressions

30 views

Basic and Intermediate guitar lessons available with Vince Myers. Guitar player for over 40 years. Many musical influences such as traditional country, classic country and classic rock. One hour sessions to be held at Stettler Rec Centre. Date and times to be determined according to response to this ad. Discount will be given on multiple session purchases. You must bring your own acoustic or electric guitar. If interested, please call or text Vince at 403-741-6042

categories:Business and ServicesSkilled Trades

815 impressions

33 views

**See below for specific box availability** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. Seeking various factory boxed cartridge ammunition trades for my 243 Win Factory Boxed Ammunition or cash prices are below. There’s a variety of brands and projectiles available. Looking for 6.5 Creedmoor, 270 Win and 300 Win Mag, I might consider 30-30 Win. This ammo is just a surplus calibre to me now and so trading off my left over ammunition. See pictures for more info. Available as detailed below: Full Boxes, 20rd count Winchester Super X, Power Point, 100gr, 11 boxes available $42ea *SOLD*Hornady Custom International Interlock SP, 100gr, 4 boxes available $42ea Federal Non Typical Whitetail SP, 100gr, 2 boxes available, $40ea Federal Power Shok SP, 100gr, 3 boxes available, $45ea Federal Power Shok Jacketed SP, 100gr, one box available, $45ea Hornady American Whitetail Interlock,  100gr, 2 boxes, $53ea Federal Power Shok SP, 80gr, 2 boxes available, $42ea Federal Premium ELD-X, 90gr, 2 boxes available, $65ea Winchester Varmit X, Polymer Tip Rapid Expansion, 58gr, 2 boxes available, $45ea Federal Premium V-Shok Nosler Ballistic Tip, 55gr, 2 boxes available, $45ea Partial Boxes *SOLD*Winchester Deer Season XP, 95gr, one box of 10rds, $25 *SOLD*PPU Rifleline Ammunition SP, 100gr, one box of 14rds, $23 Winchester Super X Power Point, 100gr, one box of 18rds, $37 **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Local only, Valid PAL required. First Paid, First Served. Holds only with deposit. Delivery Negotiable. 

categories:Sporting GoodsGuns

21916 impressions

1309 views

Selling Online March 25, 2026 from 9:00am - 10:00am MDT 309 acres selling as 2 Parcels located just over 4 miles east of the edge of Drayton Valley, Alberta. Situated in central Alberta, this community is recognizable for its agricultural focus as well as a commitment to preserving a rural lifestyle, all within a short distance of the amenities of town, and just over an hour from Alberta’s Capital City, all with the added bonus of Surface Lease Revenue.

categories:Real Estate and RentalsFarms and Land For Sale

310 impressions

51 views

This is a new, very nice, compact shot timer for IPSC, USPSA, IDPA. Use it for range practice to hone your timing. Comes with a black silicon case and lanyard. Frequently on back order. I finally got one just before I had to give up shooting. I can ship in Canada for $21. Features from their website: - Compact, ergonomic design - Clear and informative display with largest time digits - Uses any off-shelf batteries (AAA) - Up to 17 days of continuous match use on a single set of regular batteries. Even if they are close to depletion, you still have enough time to comfortably finish your match - Simple, straight forward, intuitive interface with only 3 navigation buttons, one hand operation - Loud beep: 105dB, 1.5kHz for those who have trouble hearing high frequency tones - Adjustable beep volume - Digitally adjustable sensitivity, you can pick up anything, 9mm, .22 cal, AR, Shotgun, PCC, CO2, hammer fall, striker fall, suppressed, you name it, it will hear anything - Instant or Delayed start - Multiple Par times - Presets - Durable design - 3 strings memory - Ability to display 3 strings simultaneously to compare shots - Auto Power off - Up to 10 minutes long string time, so you can time those long 3-gun stages - For over a year every aspect of design was tested extensively in the field by differents shooters, at different ranges, with different guns, different ammo, at types of matches - Made in USA

categories:Sporting GoodsGuns

1419 impressions

69 views

Mossberg patriot 6.5 creedmoor, over size bolt knob, bore snake, two drop box mags, the extra mag cost $79.99 alone at Cabelas, ammo box, manual, trigger lock, 3x9x40 scope,,sling swivels, very accurate, mint cond. Only 40 rounds thru it prefer my 243 cal reason for selling. Have 7 1/2 boxes ammo that can go with it.. for extra cash PAL a must, NO SHIPPING, CASH ONLY, AND PLEASE TEXT 403 971 3468 AS TOWNPOST MESSAGING IS TERRIBLE.....CASH OR TRADE FOR..WILL TAKE A VORTEX DIAMONDBACK 4X12X40 DEAD HOLD BDC AS PART TRADE.. PLUS CASH OR CENTERFIRE>>>>RIMFIRE>>>>> SHOTGUN<<<<<NO SAVAGE OR TACTICAL OR SYNTHETIC STOCKS

categories:Sporting GoodsGuns

1392 impressions

154 views

2 burner Primus camp stove needs a bit of cleaning, over 200 bucks new

categories:Sporting GoodsCamping and Survival Gear

147 impressions

36 views

KELOWNA. QUALITY INVACARE TRACER SX5 INSTITUTION GRADE WHEEL CHAIR FOR SALE. SEAT MEASURES: 16" WIDE X 18" DEEP X 17"- 19" HIGH. FEATURES: SEAT BELT , SWING AWAY REMOVABLE FOOT RESTS , SWING BACK CHAIR SIDES WITH PADDED FULL LENGTH HEIGHT ADJUSTABLE ARM RESTS , FOLDING FRAME , RATED TO 250 POUND CAPACITY , ADJUSTABLE SEAT HEIGHT ,SOFT PADDED UPHOLSTERY ,AND REAR WHEEL LOCKING BRAKES. SELLS NEW FOR OVER $1,200.

categories:Medical Equipment

118 impressions

21 views

This deer or decoy cart works when vehicle access is not possible. Can be used in gardens and big yard jobs as well. Sells at Bass Pro for just over 200 bucks. Come and pick it up in Red Deer for only 100 dollars firm.

categories:Sporting Goods

148 impressions

43 views

Howdy Townpost. I've got a number of these brand new Allen slings for sale. The slings I have here are an improvement over the regular Allen Endura. This batch of slings has cam buckles (sometimes called toggle clips) instead of tri-glides. They're easier to use and make attaching the webbing loops to sling swivels really quick and easy. The sling loop sections are longer and could even be used as a carry strap for small logs or something heavy in a pinch. The slings can be adjusted from 28" to 52" so they're quite versatile. The slings are $10 each. I'm currently offering a buy 3 get 1 free deal. The slings are located in SW Calgary and can be picked up almost anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping these as regular or expedited parcels should be fairly cheap since I can roll up the sling into a little roll and put it into a very small box or mailer. I may be able to ship this as an oversized lettermail if I fold one or two slings flat and get them into a large envelope too. So I expect shipping to be $5-19 depending on what option you go with, where the is the package destination and how many slings you want.

categories:Sporting GoodsGuns

18599 impressions

479 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

16209 impressions

478 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25603 impressions

891 views

This is a WWII-era British military wrist compass (officially designated “Compass, Survival, Wrist Type,” Air Ministry Ref. No. 6B/2593), issued primarily to RAF aircrew (pilots and navigators) as part of escape and evasion/survival kits, but also widely used by British airborne forces, paratroopers, SAS, SOE, and commandos. Key Features •  Blackened metal case (brass or steel) with a hinged hunter-style lid containing a mirror (for signaling). •  Dry-card design (non-liquid/air-damped compass card – no fluid visible, with a floating card that settles more slowly than liquid-filled types). The central thumb screw rotates the bezel for sighting/bearings. •  Luminous markings (originally radium paint for night visibility). •  Long khaki herringbone twill webbing strap (designed to wear over flying suits, sleeves, thigh, or ankle). •  Back markings: REF No. 6B/2593 (or similar worn variant like N968/2593), SER No. in “B/” format (B often denoting manufacturer Francis Barker & Son). Close-up photo clearly shows the dry floating card (white/silver with black markings, no damping fluid or bubbles), distinguishing it from the more common liquid-filled variants of the same model. These were produced from the early 1940s through the post-war period (your serial/year code suggests 1950s–1960s production). Dry versions are authentic but less frequently encountered intact, as many liquid ones leaked over time. Can can ship anywhere, Please see my other ads for rare and collectable military items

categories:Sporting GoodsCamping and Survival Gear

1632 impressions

163 views

Here is an excellent condition Bruno factory made German VZ 24. This is a non- matching rifle however is an excellent condition stock and boar. Comes complete with cleaning rod and site hood cover as well as  2 sling option positions with  winter trigger guard.  The Germans occupied Czechoslovakia in 1938, and their control over factories in Brno, like the Zorojovka arms factory and textile mills (like the one where Schindler's list connection is), began then, with production continuing under German direction, especially for arms like the vz. 24 rifles and ZK-383 submachine guns, until the end of World War Il in 1945. Can ship anywhere is Canada Please my other ads for rare and collectable firearms and accessories,

categories:Sporting GoodsGuns

6748 impressions

211 views

Chiappa LA322 TakeDown Lever Action Carbine, 22 lr, 920.383 The lever-action 22LR is an American classic. Chiappa continues this legacy by using modern technology and materials to produce the LA322. This beautiful rimfire is as attractive as it is functional. Accurate, quick handling and rapid shooting, the LA322 embodies all the qualities that Americans want in a lever-action rifle. A 3/8in dovetail is machined into the top of the receiver for optics. Another coveted feature is the take down design for easy transport and storage. SKU: 920.383 EAN: 8053670717282 Type of Gun: Rifle Caliber: 22 Long Rifle Action: Lever-Action Barrel Length: 18.5″ (470 mm) Capacity: 15 Feed In: Magazine Tube Trigger System: Single Stock: English Style Wood Forend: English Style Wood Front Sight: Fixed Tunnel Rear Sight: Adjustable Elevation & Windage Buckhorn Style Safety: Half Cock Hammer Weight: 5.52 lbs Length: 35.5″ (902 mm) Material: Alloy Frame / Steel Barrel Finish: Blued Lever Style: Standard Extraction: Auto Ejection FAMILY OWNED – SINCE 1958 – MADE IN ITALY The History A curious nature, a passion for firearms and a love for challenges have always guided our path at Chiappa Firearms. There will always be another challenge to take on and we’ll not be afraid to play the game. The history of Chiappa Firearms began in 1958, when Ezechiele (Oscar) Chiappa opened his company and called it Armi Sport. Initially an artisanal workshop, the company has grown over the years to become an industrial group, still wholly owned by the Chiappa family. Chiappa includes the companies Chiappa Firearms S.r.l. (defense, sporting and replica firearms), KIMAR (blank and signal guns), ACP (training systems), Costa S.r.l. (surface treatment of metals) and Chiappa Firearms USA, Ltd. (USA’s distribution center). The success story of the Chiappa derives from a combination of factors, among which are a great technical experience matured over 60 years; ability, the courage and entrepreneurial spirit of the President Rino Chiappa, and the total dedication to work of the whole Chiappa family. These capabilities have lead Chiappa to a series of winning choices, focusing on technological advancement, on understanding and meeting the needs of the market while constantly introducing new models, but also offering accuracy and continued support to customers. All stages of production are carried out entirely within the company. The manufacturing process begins with the design of the 3D model, followed by the realization of prototypes and the transfer of data to CNC machines. Through specific CAM software, the machining equipment is able to produce any component in a very short time taking instructions directly from the 3D drawings. Order and organization are common to all factory departments: the workshop with numerical control machines (CNC) for the processing of components machined from solid steel such as receivers and breeches, or for the realization of all types of stocks and other small parts; manufacturing of barrels; die casting and molding of plastic material; ovens and equipment for heat treatment; surface treatment, such as bluing, parkerizing, nickel plating, as well as equipment for grinding and polishing of metal and wood components. The entire manufacturing process is managed and coordinated by a computer system that encompasses all steps of production. This system allows for a thorough control of the execution time, thus keeping production costs tightly monitored. Finally, all firearms are visually inspected and test fired in the shooting range built inside the company before being brought to the packaging area. Thanks to the experience of the personnel, the tradition of artisan craftsmanship cohabits with a modern organization within the same factory, fostering maximum efficiency. Chiappa manufactures a wide range of models. The catalog includes replicas of American historic weapons and muzzleloaders, lever action shotguns and rifles, handguns and rifles in .17 and .22 rimfire, sporting and self defense handguns such as the famous Rhino, signal guns and air guns. As a direct result of the optimization of the manufacturing process, all Chiappa products are an excellent value. Chiappa today is a rapidly developing, constantly evolving corporation. The great capacity to innovate with flexibility and dynamism, the wide range of products and the excellent value for the consumer have allowed Chiappa to spread sales in 60 countries, being fully able to compete with the biggest companies in the world.

categories:Guns

48299 impressions

3821 views

Both are made in Brazil, both are fixed full and mod chokes. Several wood only dings in both but no cracks and very little metal wear showing a very low round count. No issues. Selling both at once. 28" is a Condor 1. by IGA What a nice Christmas Gift .... get your buddy into trap shooting over the winter ...  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

11544 impressions

508 views

Not often seen with all these collectible features, bore is decent, appears all original, all numbers match including floor plate, shipping will be expensive as it will have over length extra charge. Est 75$ most of Canada.   More photos available if serious.   A great Christmas Present .... Please use cell phone text messaging." Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference

categories:Sporting GoodsGuns

7605 impressions

327 views

QUALITY INSTITUTION GRADE INVACARE PATRIOT WHEEL CHAIR FOR SALE IN KELOWNA.Seat Measures: 18" wide X 18" Deep X 16"-18" High. Features Include: Light Weight Aluminum Folding Frame , Anti Tip Over Rods , Full Length Removable Chair Sides With Swing Away Feature And Height Adjustable Arm Pads , Swing Away Removable Foot Rests With Foot Support Straps , And Dual Rear Wheel Brakes With Extension Handles. Costs Over $1,200 When New.

categories:Medical Equipment

11208 impressions

1140 views

RARE 1960's 3 FOOT TALL STUFFED TOY RABBIT FOR SALE. OVER 60 YEARS OLD. MANUFACTURED BY GANZ BROS TOY COMPANY IN ONTARIO ( see tag photo ). Features ; Plush Floppy Ears , Red Long Tail Tux , And Generous Size . A Perfect Addition For Child's Bedroom , Nursery , Or Playroom . A True Vintage Collectible And Enjoyable Toy.

categories:Household ItemsKids and Baby Items

7512 impressions

672 views