Frankford Arsenal bullet press $300 and stainless steel pin brass cleaner $250 Brand new. Used once

categories:Sporting GoodsGuns

21394 impressions

524 views

New in box Kobra Side Mount For Type 81 Introducing the Legendary Kobra Red Dot Sight for the Type 81. No-drill, Side Mount Installation for Type 81. The side mount installation is completely reversible and does not involve any drilling or permanent alterations to the rifle. Fits rifle and LMG versions. Compatible with Left Hand Shooting. The mount was custom engineered and manufactured specifically for the Type 81 rifle and was extensively tested to ensure reliability, durability and zero-holding properties. The mount consists of replacement hammer and trigger receiver pins with threaded ends on one side and hex indentations on the other. The replacement pins thread into the adapter plate, while the safety is replaced with a right-hand safety. The side mount is quick-detach and fits over the adapter plate. The pins are custom manufacturedthe USA of Grade 8.8 strength steel while the adapter plates are precision machined in Canada of 6061 T6 alloy with Mil 8625 Type 3 Hardcoat. Comes with threaded trigger pin, threaded hammer pin, adapter plate, right hand safety and Kobra EKP-1S-03 Sight.

categories:Sporting GoodsGuns

342 impressions

26 views

Canadian Pacific Coast Militia Rangers (PCMR) fighting knife from World War II. The PCMR was a home guard/militia unit formed in early 1942 specifically to defend British Columbia’s west coast against a potential Japanese invasion after Pearl Harbor. They were part of Canada’s Reserve Army, composed mostly of older men, hunters, outdoorsmen, and locals familiar with the rugged terrain. They patrolled remote areas, watched for enemy activity, and were trained in guerrilla tactics, demolitions, and small arms. PCMR knives were often improvised or field-modified from available surplus parts due to equipment shortages for these volunteer units. A common (and well-documented) type was conversions of old Ross rifle bayonets (Canadian WWI-era .303 Ross bayonets, which were plentiful and obsolete by WWII). These were cut down, reshaped into a broad fighting/utility blade (clip point, single-edged with some curve), fitted with a simple wooden handle (often riveted or pinned), and given a metal guard/crossguard.   A broad, darkened carbon steel blade with patina/wear typical of field use or age. •  Wooden handle secured by pins/rivets. •  Metal bolster/guard with markings but this is likely misread or a coincidental stamp; PCMR examples sometimes have odd or repurposed markings from surplus parts. Can ship anywhere in Canada please see my other answers for very collectable accessories

categories:Sporting Goods

127 impressions

31 views

10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 . 11) Winchester pre 64 Model 94 / 1894 - Saddle Ring Only - $85.00 . Screws . 14) 6-48 Filler Screws (4) - Blue $20.00 . 15) Win 1890-06-62 Tang Screw - 40.00 . 16) Win 1894-1892-1873 PG Tang Screw - 60.00 . 17) Win 1876-1886 Tang Screw - 40.00 . 18) Win 1894-1892-1873-1895 Tang Screw - 40.00 . 19) Win 1894-1892-1873-1895 Upper Tang Plug Screw - 35.00 . 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 . 21) Win 1894 (pre 64) Magazine Plug Screw Long - 35.00 . 22) Win 1894 (pre 64) Finger lever pin stop screw - 45.00 . 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 . 24) Win 1894 (pre 64) Loading gate screw - 40.00 . 26) Win 1892 -1894 Forend Cap Screw (2) - 45.00 . 27) Win 1892 -1894 SRC Front Band Screw - 40.00 . 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 . 29) Win 1885 Low Wall Tang Screw - 35.00 . 30) Win 1885 High Wall Tang Screw - 35.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

77036 impressions

1811 views

Best offers or trades considered. Please text or email only as I live in a bad service area.

categories:Sporting GoodsGuns

42031 impressions

725 views

Toxonics bow sight with fibre optic pin scope.

categories:Sporting GoodsBows

17040 impressions

1264 views

Mathews Riva Pro RH camo bow 30" draw, 50-70 draw weight, Platinum Premier rest, PSE mongoose sight - 8 pin / level and 10" Super-Stix stabilizer. 16 - Easton ACC 3-49/390 arrows with 4 feathers and 68gr. tips. 1 wrist release, arm guard, arrow puller, 3D target score pictures and spare bow string. Hard bow case

categories:Sporting GoodsBows

23370 impressions

1674 views

Mathews MQ1 RH camo bow 29.5" draw, 50-70 lbs. draw weight, Kyber shock stabilizer, 3D rover Rest, PSE fibre optic sight- 7 pin. 12 Easton ACC 3-60/340 arrows with 4" feathers. 6 - 100 gr. Spitfire broad heads with practice weights. 1 - 6 arrow quiver 3 - deer calls 1 - arm and chest guard Shot my 6 point whitetail buck from tree stand and 1 week later shot my 2by3 point mule deer.

categories:Sporting GoodsBows

22120 impressions

1795 views

Toxonics bow sight with single pin. Used.

categories:Sporting GoodsBows

15911 impressions

926 views

1980's 20 MB hard-drive. For Atari ST. 19 pin connector. Not tested. As Is.

categories:Household ItemsElectronicsComputers and Tablets

565 impressions

88 views

SQUIRES BINGHAM M14, 22LR BOLT ACTION , EXCELLENT RIFLING , DETACHABLE MAG, SLING SWIVEL PINS,  DOVETAIL ON RECEIVER FOR SCOPE INSTALLATION. NORMAL USE DINGS ON STOCK BUT NO CRACKS.  NO RUST.  TEST FIRED, LOADS, FIRES AND EJECTS AS IT SHOULD. SHIPPING IS $50 ANYWHERE IN CANADA. CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

6061 impressions

896 views

WINCHESTER MODEL 37A,410 GA 26 IN CLEAN BORE BARREL CHAMBERED 3.0 IN. PREVIOUS OWNER REPLACED FRONT BEAD WITH WELDED ON HOME MADE BEAD AND ALSO INSTALLED SLING SWIVEL ON FOREND, THAT DOES NOT WORK AS WHEN YOU PULL ON SLING, THE GUN COMES APART , TO SOLVE THIS HE INSTALLED A PIN FROM RIGHT TO LEFT ON THE SIDE OF THE FOREND TO LOCK IT IN PLACE, THAT MEANT THAT YOU COULD NT TAKE IT APART ANYMORE, SO I REMOVED THE PIN, THE FRONT SWIVEL AND INSTALLED ONE THE BARREL AS IT SHOUL HAVE BEEN DONE BUT YOU HAVE 3 HOLES IN THE FOREND TO FIX. OTHER THAN THAT , ITS FINE. SHIPPING IS $50 ANYWHERE IN CANADA, CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

6073 impressions

313 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:Sporting GoodsGuns

3168 impressions

520 views

1) Winchester pre 64 M94 - Carbine Blade Gold Beaded Insert - $95.00 . 2) Winchester pre 64 Model 94 - Front Sight Hood - $40.00 . 3) Winchester pre 64 Model 94 - Front Sight Beaded Insert - $75.00 . 4) Winchester pre 64 Model 94 - 22B Rear Sight - $350.00 . 6) Older Original 1A - 1B - 1C Elevators - $60.00 . 7) Winchester pre 64 Model 94 - 22G Rear Sight - $250.00 . 8) Winchester Model 94 - Rear Sight 3C - 6 Step Elevator - $50.00 . 9) DT-1 Marble's  3/8" Dovetail - Curved Top  -  $45.00 . 10) Winchester pre 64 Model 94 / 1894 - Saddle Ring Stud & Ring - $95.00 . Screws . 14) 6-48 Filler Screws (4) - Blue   $20.00 . 15) Win 1890-06-62 Tang Screw  - 40.00 . 16) Win 1894-1892-1873 PG Tang Screw - 60.00 . 17) Win 1876-1886 Tang Screw  -  40.00 . 20) Win 1894 (pre 64) Magazine Plug Screw Short - 35.00 . 21) Win 1894 (pre 64) Magazine Plug Screw Long -   35.00 . 22) Win 1894 (pre 64) Finger lever pin stop screw - 40.00 . 23) Win 1894 (pre 64) Link Pin Stop Screw - 40.00 . 24) Win 1894 (pre 64) Loading gate screw - 40.00 . 26) Win 1892 -1894 Forend Cap Screw (2) -  45.00 . 27) Win 1892 -1894 SRC Front Band Screw  - 40.00 . 28) Win 1892 -1894 SRC Rear Band Screw - 40.00 . 29) Win 1885 Low Wall Tang Screw - 40.00 . 30) Win 1885 High Wall Tang Screw - 40.00 . --- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

138184 impressions

8018 views

The aluminum grips I have are machined from billet. Here is what I have left. All chassis, rails, mag releases and quick pins sold. 3-Stinger 556 1/2”x28tpi Muzzle brake $125 1-Stinger 308 5/8x24tpi Muzzle brake $125 1- Fury billet alum grip $125 Rare item, don’t see these anywhere, and all items are new in box.

categories:Sporting GoodsGuns

31654 impressions

1771 views

This bolt action single shot shotgun was made in the 1870's and probably converted to a shotgun in Belgium in the 1890's. the gun is in working condition, has a crack that has been repaired by pins shown in pictures. also has some scratches shown in pictures. open to trades Located by evansburg, but make frequent trips to spruce grove.

categories:Sporting GoodsGuns

87734 impressions

5844 views

1) Browning Belgian SA-22 Dove Tail Flip Down Rear Sight  -  $165.00 . 2) Browning Belgium T-Bolt Firing Pin  -  $100   . 3) Browning Belgian Original Gold Bead Front Sight   -  $85.00 . 10) 6-48 Filler Screws (4) - Blue   $20.00 . 11) 3/8" DT Filler - Curved Top - $45.00 . --- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads.

categories:Sporting GoodsGuns

78899 impressions

2758 views

1) Win post 64 M70 Rear Sight w/ 2 screws - $135.00 . 2) Win post 64 M70 Front Sight w/ Insert, Hood & Screws - $175.00 . 7) Winchester Pistol Grip Cap Scroll Insert Only - $25.00 . --- . 21) Win pre 64 M70 - 22G Rear Sight w/o Elevator - $275 . 22) Win 3C - 6 Step Elevator - $50 . 23) Win pre 64 M70 Folding Rear Sight - .47" H - $100 . 24) Win pre 64 M70 - Front Sight Insert - $75 . 25) Win pre 64 M70 - Front Sight Hood - $40 . 26) Winchester Marksman - Target Stock - Sling Swivels - $150.00 . 27) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (without Pins) - $155 . 28) Win pre 64 M70 - Trigger, Bolt Stop & Sear Assembly - (with Pins) - $175 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

62894 impressions

1177 views

For sale are: Five Magpul AK-47 magazines Individual magazines are $32 These work well in the wk181c and m10x These magazines are pinned by rivet (not crimped or welded) to reduce their capacity to 5 rounds (from the original 30) to comply with Canadian law. Shipping available at actual cost or pick up in SE Edmonton. Please click on my user name to learn more about my business, see my other ads, trades or shipping policies. The section of C-21 that requires a PAL to purchase magazines has come into force. I don't need to run your PAL through the government website (like a firearms purchase) but I need to at least see it. This is the last import of this magazine type WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

15357 impressions

1586 views

SAVAGE MODEL 99, CHAMBERED IN 300 SAVAGE, MANUFACTURED IN 1954, EXCELLENT CLEAN SHINY RIFLING, OIL FINISH ON WOOD, NORMAL WEAR ON BLUE, NO RUST OR PITTING. ROUND COUNTER ON SIDE. SLING SWIVEL PINS. FACTORY DRILLED FOR SCOPE. SHIPPING IS $75 ANYWHERE IN CANADA.   CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

2276 impressions

193 views

peep site 65.00 pin for long rail 12.00

categories:Sporting GoodsGuns

98855 impressions

5581 views