New 40'HC shipping container without side walls External dimensions: length 12.2 m, width 2.44 m, height 2.89 m. The top cube has the following dimensions. Internal dimensions: length 12.04 m, width 2.35 m, height 2.69 m. Capacity: up to 76.4 m³. Load capacity: up to 28,560 kg. Weight: 3,940 kg (empty).

categories:Other

341 impressions

28 views

BLUE HELIO C2 18.5 " QUALITY HIGH END WHEEL CHAIR FOR SALE. VERY LIGHT WEIGHT CARBON FIBER CONSTRUCTION. SEAT MEASURES 18.5 " WIDE X 20" DEEP X 17"- 20" HIGH WITHOUT CUSHION . ADJUSTABLE SEAT HEIGHT . FEATURES INCLUDE: SEAT BELT , CUSTOM JAY SHELL BACK CUSHION ,ANTI TIP OVER RODS , REMOVABLE REAR WHEEL AXLES (BY PUSHING CENTER HUB BUTTON) , SWING BACK REMOVABLE CHAIR SIDES , ADJUSTABLE CASTERS AND FRAME WHEEL LENGTH , SWING AWAY REMOVABLE FOOT RESTS WITH FOOT STRAPS , HEIGHT ADJUSTABLE ARMS , AND SUPRA CORE STIMULITE SEAT CUSHION. COSTS APPROX. $3,000 NEW.

categories:Medical Equipment

82 impressions

14 views

DOUBLE SANITARY CONTAINER WITH 2 CABINS – TOILET AND SHOWER External dimensions: 246 x 197 x 245 cm Area: 4.85 m² Condition: New Doors: Standard doors The container is made of 6 cm thick panels. It is fully equipped for plumbing, wastewater drainage (external connections: 110V for wastewater and 19 mm for water) and electrical supply (230V). An instantaneous water heater is installed near the tap. The door is 75 cm wide. Gravity ventilation is provided. The other side is equipped with a shower cubicle. The container is ready for loading/unloading using a forklift.

categories:Tools and Equipment

97 impressions

25 views

Special Event or fancy dress event to attend? These beautiful dresses were our Mom’s. They deserve to be seen and worn. Open to offers 1. Light blue print sleeveless dress, with sheer jacket. Tiered hem. Fully lined. Size 14 2. Gorgeous cream and black floor-length dress. Liz Claiborne. Short sleeves. Fabulous button and flower detail with short zipper at back. Inverted pleat at back for fullness. Fully lined. Straight hem would make it easy to alter to knee-length. Size 14 3.Sparkly black jacket and long skirt set. NEVER WORN. Tag still attached. Zipper front of jacket. Lovely cuff detail. Skirt has back zipper, with rhinestones the full length of one side. Short zip at bottom for a small kick. Fully lined. Size XL, but would be similar to the others, about 12-14 4. Purple 2-piece top and long skirt set. Actually a little darker than shown in the pictures. Draped neckline. Sparkly beaded detail on top. Skirt is flared at bottom. Unlined. Size 14 Mill Woods Location. Smoke and pet-free home

categories:Household ItemsClothing and Apparel

6249 impressions

1118 views

Sewn to Military Specification, 2-piece double-reinforced elbows, Felled side seams and sleeves and, Adjustable sleeve buttons, made in the usa, some snirts may nave name tapes and patces,m condition, used surplus item $20 Buyer pays shipping

categories:Sporting GoodsCamping and Survival Gear

136 impressions

26 views

n-Restricted rifle Lee Enfield (Long Branch) NO 4 MK I* on-Restricted rifle Lee Enfield (Long Branch) model NO 4 MK |* .303 British Ten shot bolt action w/ bbl length 25" Blued barrel and receiver. Fixed front and adjustable flip up rear sight. Includes one detachable box magazine and sling. Full wood stock with metal butt plate. Matching serial number on receiver and bolt. Left side of receiver marked 1945. Fitted with less common two groove barrel. Mechanically appears to function reasonably well. Bluing worn in use and handling areas plus other use, handling and storage marks. serial # 88L7578 PAL required

categories:Sporting GoodsGuns

1466 impressions

90 views

We have twelve lab cross puppies available today! Located in Camrose County, AB. Pups are 8 weeks old and ready for their new homes as of Jan 17th. All are on hard food and have had their first set of shots. Mom is a very sweet tempered, 1 year old black lab who was already pregnant when we adopted her; this is her first (and only) litter. She is on the larger side at roughly 80 pounds. Based off the information we have from her previous family, the father is a brindle bully from a neighboring farm, although we are not sure the specific size or breed. Due to the circumstances he is not available for viewing. Pups will most likely be in the medium to large size range when fully grown. They are currently displaying a nice range of physical traits (most favoring one breed or the other) depending on what you're looking for! Asking $250 to cover the cost of supplies and shots. Text (780) 781-6371

categories:Pets and AnimalsDogs

123 impressions

36 views

Hey there, Selling a JP Sauer (As in Sig Sauer) Side by side in 12 gauge. 2 3/4' Chamber. 28" barrels, both choked "Full". Refinished to a glossy burgundy. Euro 1" Sling mounts, so sling included. Great shape overall. Bores are great. No rust or missing parts. No cracks on the side in the wood, in the tang, or on the wrist. Only discloser is some retaining screws on the boxlock got re-tapped. Price is plus shipping, not interested in trades, thx.

categories:Sporting GoodsGuns

975 impressions

74 views

Unused Made in Israel by IMI Defense Enhanced Bipod Foregrip With side rail for tactical attachments. Pickup GTA Ship on buyer

categories:Sporting GoodsGuns

1756 impressions

355 views

VERY NICE WINCHESTER 94 , CHAMBERED IN 30-30. MANUFACTURED IN 1971. PREVIOUS OWNER BOUGHT IT NEW, USED IT VERY LITTLE, BROKE THE STOCK AND JUST STORED IT AFTERWARDS. I REPLACED THE ORIGINAL BIRCH STOCK WITH A REPLACEMENT WALNUT STOCK SO ITS ACTUALLY AN IMPROVEMENT. FINISH HAS SOME LIGHT FRECKLES ON THE RECEIVER SIDES  BUT THE REST OF THE BLUE IS LIKE NEW ON ALL THE OTHER METAL PARTS. CLEAN SHINY BORE. SMOOTH ACTION. SHIPPING IS $75 ANYWHERE IN CANADA. CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

571 impressions

72 views

Voere-Titan 2 Caliber 7mm STW, Rifle with new barrel stainless only few shoothing for scope adjust, Strong action ,smooth trigger Bolt ultra slippery, Action Glass bedding , nice wood only one small crack on left side was fix with acra-glass, Strong Rings, Leupold scope VX-3L 4.5 x 14 x 56 Ultra clear with Len cover magnetizing, Worth more than 1300, ( level not includ ) For Rifle only $1500.00 + shipping without scope and assbl. $2600 for all + ship Préfet sell togetther, For Scope only $1100 + shipping, reticle mode FIN, ( For picture Open this file) file:///C:/Users/Utilisateur/Downloads/leupold%204.5x14%20x56%20vx3L.webp

categories:Sporting Goods

27639 impressions

2699 views

KELOWNA. QUALITY INVACARE TRACER SX5 INSTITUTION GRADE WHEEL CHAIR FOR SALE. SEAT MEASURES: 16" WIDE X 18" DEEP X 17"- 19" HIGH. FEATURES: SEAT BELT , SWING AWAY REMOVABLE FOOT RESTS , SWING BACK CHAIR SIDES WITH PADDED FULL LENGTH HEIGHT ADJUSTABLE ARM RESTS , FOLDING FRAME , RATED TO 250 POUND CAPACITY , ADJUSTABLE SEAT HEIGHT ,SOFT PADDED UPHOLSTERY ,AND REAR WHEEL LOCKING BRAKES. SELLS NEW FOR OVER $1,200.

categories:Medical Equipment

122 impressions

21 views

****Pls check other ads of mine for more accessories and guns**** Brand new MDT CZ 457 scope base / rail Side screws version (the better one) Can be shipped in envelop through regular mail. Pickup GTA Ship on buyer

categories:Sporting GoodsGuns

4350 impressions

225 views

RCMP medallion from 1974 for the 100 year anniversary of the RCMP in Alberta, still in package, never worn, south side pick up, no holds with out e transfer, and if it is posted it is available.

categories:Household ItemsCollectibles

9544 impressions

1183 views

Please text anytime 6476871484. Fully functional double action revolver in perfect like new condition. Tasted with modern smokeless powder ammo shown on the last picture. No PAL required. Ammo is available but sold separately. Comes with FRT paperwork. Nagant M1887 Swedish Service Revolver, 7.5mm Nagant or .32 S&W long/short It is in excellent like new condition. This is an early, pre-1893, Belgian-made Swedish model, before Nagant transferred production to Husqvarna. It is in excellent condition throughout, with the original blue intact. The nitre-blue colors on the loading gate spring, hammer and trigger are excellent. The action is crisp and strong, and the cylinder indexes and locks properly, without play. The bore of the 4 1/2 inch barrel is excellent and mirror bright, with sharp rifling and no signs of pitting or wear. The walnut grips are excellent and undamaged, and show only a little wear on the right side. Pre-1893 Belgian proofs, SN 1827, rated excellent overall.

categories:Sporting GoodsGuns

5284 impressions

286 views

Brand new Non-restricted Caliber: 45-70 Gov Capacity: 4 Rounds Action: Lever Action Safety: Transfer Bar Finish: Blued w/ hardened brass receiver Barrel: 20" Round Blued Steel Front Sight: Ramp w/ .062" Ivory Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Brass Length of Pull: 14" Rate of Twist: 1:20 Overall Length: 38.3" Weight: 7.5 lbs. Made in USA

categories:Sporting GoodsGuns

10621 impressions

744 views

Tacstar slim line 870 side saddle + 870 rear sling mount Looking for 60$ + shipping

categories:Sporting GoodsGuns

1054 impressions

60 views

Brand new Non-restricted Caliber: 30-30 Winchester Capacity: 5+1 Action: Lever Action Safety: Transfer Bar Finish: Blued w/ hardened brass receiver Barrel: 20" Round Blued Steel Front Sight: Ramp w/ .062" Ivory Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scope ability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Brass Length of Pull: 14" Rate of Twist: 1:12 Overall Length: 38.3" Weight: 7.5 lbs. Made in USA

categories:Sporting GoodsGuns

5127 impressions

253 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

16218 impressions

478 views

Howdy Townpost. This is a fine English pocket or coat pistol made by Hollis and Sheath company which is the precursor to Hollis and Sons or Isaac Hollis and Sons. Wallace and sheath became Hollis and Sons in 1861 when Isaac Brentnall Sheath left the company to immigrate to Canterbury, Australia and raised sheep and owned coal mines in an area that is now a suburb of Melbourne. His gun making days were behind him, he'd become an industrialist down undah. Sheath & Hollis co-founded the company in 1849 and Sheath stayed with the company until as previously stated, 1861. That dates this firearm between 1849 and 1861. This is a single shot side hammer lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. The gun is mechanically excellent. The bore condition is very good, there is some minor shallow pitting but overall the rifling is very sharp and clean and shiny. The overall exterior condition of the metal and wood is in excellent shape the diamond checkering are sharp and defined. The powder chamber has only minor pitting as pictured and was cleaned out internally. For a defensive coat pistol, the sights are excellent and easy to pick up and with a rifled bore in good condition I expect this pistol could be fired very accurately. To shoot this gun I would use 3F powder. Both number 10 and 11 caps fit the nipple reasonably well. A 40 caliber lead ball would be ideal as a projectile but you could definitely use .375 caliber balls with a patch no problem in my opinion. I haven't tried it myself though. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

14116 impressions

354 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25623 impressions

891 views