Photo of Optic mount for factory (non optic cut) pistol slides
$89.95
Optic mount for factory (non optic cut) pistol slides
Introducing an innovative solution for mounting optics to your pistol slide: The Versa Tactical SIGHTSECURE dovetail mount. Available for Beretta and for Glock. To purchase, head to this link: https://partsonly.ca/product/glock-dovetail-optic-mounting-kit/ This system allows the user to install an optic on a slide that does not have an optic cut. Made of a solid piece of 4340 steel, this mount will not bend or break. Has been extensively field tested with thousands of rounds fired. There are no moving parts, latches or other components to wear/break. Simply slide the Versa Tactical mount in the slot where your factory rear sight goes, and install the 2 expander screws. Then your optic is ready to go on! This mount allows for mounting of any industry standard RMR footprint optic. We recommend using a small amount of blue loctite for installation of all the hardware. Ensure the expander screws are inserted until flush and snug, but do not over-tighten! We recommend tightening of the optic mounting screws to either 14in-lbs or to your optic manufacturer's specification, whichever is lower. The Glock mount is compatible with the following models: 9mm – G17,G19,G26,G34,G45 10mm Auto – G20,G29 .357 – G31,G32,G33 .40 SW – G22,G23,G24,G27,G35 .45 G.A.P. – G37,G38, G39 .45 Auto – G21,G30,G36,G41 This Glock dovetail optic mounting kit will not fit and is not suitable for the Glock MOS models! The Beretta mount is compatible with the following models: M9 M9 Exclusive M9A1 M9A3 M9A3 Black M9 22lr 92 Fusion Black 92 Fusion Blue 92 A1 92 Compact 92 Compact w/ Rail 92 Compact with Rail Inox 92 Vertec Inox 92FS 92FS Fusion 92FS Inox 92FS Brigadier 92FS Brigadier Inox 92G 92G-SD 92G Elite 92X Centurion 92X Compact 92X Compact w/ Rail 92X Full Size 98A1 98FS 98FS Inox 90 Series Inox This mounting kit will not fit and is not suitable for the following Beretta models (including but not limited to): ANY Beretta Optics Ready Models 92FS Centennial 92 Performance 92 Performance Defensive 92 RDO Compact M9A4 Centurion Taurus 92 Color: Black Material: 4340 Steel Kit includes: 1x Versa Tactical SightSecure™ optic mounting plate for rear sight dovetail 2x Expander screws 2x Optic retention screws 1x HEX driver
categories:Sporting GoodsGuns
21102 impressions
997 views
Onoway, AB13 hours ago
Photo of Savage Mark II FVT Bolt Action 22LR, 21” Heavy Barrel, Accutrigger, Peep Sights
$629
Savage Mark II FVT Bolt Action 22LR, 21” Heavy Barrel, Accutrigger, Peep Sights
**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a new Savage Mark II FVT bolt action 22LR, the 21” heavy carbon steel barrel is button rifled and weighs 6lbs. It has a Peep Sight with changeable front sight inserts (see pic), user adjustable accutrigger, and a 5rd detachable magazine. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** First Paid, First Served.
 Holds only with deposit. Delivery Negotiable. 
 Buyer pays for shipping costs and makes arrangements for payment. MANUFACTURER DESCRIPTION Raising the bar in 22 LR performance, the Savage Arms Mark II FVT offers user-adjustable AccuTrigger technology for crisp, customized trigger pulls. The 21-inch, heavy carbon steel barrel is button rifled and paired with a rugged, matte black synthetic stock. Weighing 6 pounds, the rifle has a 5-round detachable box magazine and peep sights. FEATURES * Button-rifled, 21-inch heavy carbon steel barrel * Rugged, black matte synthetic stock; peep sights * 22 LR chambering; 5-round detachable box magazine SPECIFICATIONS SKU - 28800 Purpose - Small Game, Target Shooting Barrel Contour - Varmint Barrel Finish - Matte Barrel Length - 21" (53.34 cm) Barrel Material - Carbon Steel Rate of Twist - 1:16" Barrel Threaded - No Pistol Grip - No Interchangeable Grip Panel - No Magazine Capacity - 5 Magazine Release - Ambidextrous Receiver Material - Carbon Steel Feed Type - Detachable Box Magazine Sights - Front Metal Sights - Rear Metal AccuStock - No Stock Pull Length - Min. 13.9" (35.31 cm) Stock Pull Length - Max. 13.9" (35.31 cm) Stock Material - Synthetic Stock Type - Varmint AccuTrigger - Yes Trigger Adjustable - Yes Trigger Pull Force - Min. 2.5 lbs (40 ounces) Trigger Pull Force - Max. 6 lbs (96 ounces) Length - 39.75" (100.97 cm) Weight - 6.12 lbs (2.78 kg)
categories:Sporting GoodsGuns
8452 impressions
269 views
Spruce Grove, AB14 hours ago
Photo of John Forbes of Liverpool Sawhandle Smoothbore Adjustable Trigger .62 Calibre Percussion Conversion Fine Antique Dueling Pistol
$4950
John Forbes of Liverpool Sawhandle Smoothbore Adjustable Trigger .62 Calibre Percussion Conversion Fine Antique Dueling Pistol
Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.
categories:Sporting GoodsGuns
6747 impressions
251 views
Calgary, AB4 days ago
Photo of Nock .40 Cal. Spring-Loaded Bayoneted Screw-Barrel Percussion Antique Coat Pistol
$2100
Nock .40 Cal. Spring-Loaded Bayoneted Screw-Barrel Percussion Antique Coat Pistol
Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.
categories:Sporting GoodsGuns
5238 impressions
147 views
Calgary, AB4 days ago
Photo of Hoppe's Bore snakes $12 each. Pull throughs
$12.00 Each
Hoppe's Bore snakes $12 each. Pull throughs
Manufacturer NEW Bore snakes by leading manufacturer "Hoppe's" 21 models covering thousands of Calibers all have an embedded bronze brushes. $12 each. Perfect for the Home, Backpack or at the Range. Machine washable air dry. DON'T PAY $29.95 for fancy packaging and the same product. Remember a bore snake has 160 times more cleaning surface area than a patch in a single pull. I Will ship Anywhere in Canada. (4) bore snakes shipped for $5.00 using oversize letter by Canada Post. This does not include the 16 20 12- and 10-gauge shotgun as they are simply too thick and heavy and must go parcel. -For larger orders the most cost-effective Method of shipping is by parcel using Canada post Pre paid boxes. The Extra small size is a flate rate of $20 anywhere in Canada with tracking and $100 insurance and can hold quite a few items. 9 ½ inches x 6 ½ inches x 3 ½ inches. Have a look at my other ads as I certainly will combine orders. Feel free to PM me with any of your questions. Thanks Mike PISTOL MODELS .38 .357 .380 & 9mm as well as .44/.45 and .40/41 all are Suitable for Carbines. NEW .30 cal carbine Model. Total length of 55 inches with 25 inches of cleaning rope $10 .17/.17HMR/.17WSM .22/.223/5.56/.22-250/.222 6mm/.243 .270-.284/7mm/.280 .25/6.5mm/.264/6.5PRC 30/7.62mm/30-30/.308/30-06/300wsm/.300win/.303 .30 Carbine .32/8mm/.325 .35/.350/.357/.358/.375/9.3 .338-.340 .416/.44/45-70/.458/.460 .50-54 .410 gauge 28 gauge 16 gauge 20 gauge 12 gauge 10 gauge
categories:Sporting Goods
245245 impressions
12103 views
Kamloops, BC6 days ago
Photo of SWISS SCHMIDT RUBIN, M1911 CARBINE 7.5mm X 55mm  1931 Manufacture
$1400
SWISS SCHMIDT RUBIN, M1911 CARBINE 7.5mm X 55mm 1931 Manufacture
SWISS SCHMIDT RUBIN MODEL: 1911 CARBINE CALIBER: 7.5 X 55, COMES WITH MAGAZINE, BORE IS VERY GOOD, SHINY. MADE IN 1931, VISIBLE NUMBERS MATCH. BLADE FRONT SIGHT WITH EARS, ADJUSTABLE U NOTCHED REAR SIGHT, BROWN POLYMER BOLT KNOBS, SILVER BOLT. TWO PIECE FULL MILITARY WOOD STOCKS, FINGER GROOVED FOREND, PISTOL GRIP, SMOOTH STEEL BUTT PLATE, SWIVELS WITH METAL HOOK FROM SLING ON ONE OF THEM, STACKING HOOK, BAYONET LUG. METAL FINISH SHOWS SOME NORMAL SCRATCHES, HANDLING MARKS AND WEAR. STOCKS SHOW SOME NORMAL SMALL MARKS, SCRATCHES AND WEAR. ACTION: STRAIGHT PULL RIFLE, BARREL LENGTH: 23.25" CLASS: CANADIAN NON RESTRICTED. Excellent Overall Condition An improvement over the original 1889 version of the Schmidt–Rubin rifle, the Swiss M1911 placed the locking lugs in the middle of the bolt, rather than at the rear, strengthening the action and allowing a more powerful cartridge, the Gewehrpatrone 11 or GP 11 to be used. It is distinguished from the 96/11 rifle by a curved butt plate and by a stock with an integral semi-pistol grip. It uses a graduated tangent sight which begins at 300 meters. The 1911 and 96/11 rifles were made with excellent craftsmanship, and were exceptionally accurate. As Switzerland remained neutral through both world wars, remaining rifles are typically in far better condition than other European rifles of the time. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.
categories:Sporting GoodsGuns
27006 impressions
1088 views
Saskatoon, SK6 days ago
Showing 21 of 56 records
Location
Search within
of
Categories

Other
Medical Equipment

Transportation options

Local Pickup50Can Deliver2Can Ship26