Sako AV 30-06 Hunter Sako 30mm Opitlok rings included. Shot 2 boxes of ammo is my backup gun. Scope not included $1500.00. Carl Gustav 30-06 with scope, original barrel, new Sako barrel, trigger lightened, installed by Henry $800.00. I don't need a backup gun; either one will sell, so I will keep the other.

categories:Sporting GoodsGuns

27935 impressions

2283 views

Older Coleman lanterns. Price is for everything. None of these have been tested lately, so selling as-is. $100 takes it all. You Get: - Coleman 5155 dual mantle propane camping lantern w/ case. New, never used. Comes with case, base, handle, and manual. Produced circa 2002. - Coleman dual propane lantern, unknown model number. Comes with red case and black and green bases. - Coleman single mantle propane lantern (model #5419-700). Unit only, no glass globe. Production started in 1976 and into the 80's. - Coleman single mantle propane lantern (model #5151C700C). Big crack on glass globe, comes with bottle base. Produced in the 1990's. - Greatland replacement glass globe for most duel mantel lanterns. - Propane bottle base for 5152D, 5151C, and 5150 lanterns

categories:Sporting GoodsCamping and Survival Gear

271 impressions

19 views

4) Savage 1899 Rear Sight (FT) & Elevator (98%) (Stamped Pat Pend) - $165.00 . 6) Savage 99 Rear Sight (Early FT) & Elevator (95%) - $135.00 . 7) Savage 99 Rear Sight (Later FT) & Elevator (95%) - $145.00 . 8) Savage 99 Rear Sight (Semi- Buckhorn) & Elevator (95%) - $165.00 . 9) Savage Folding Rear Sight & Elevator - $145.00 . 10) Savage Flat Top Rear Sight (Reproduction) & Elevator - $75.00 . 13) Savage 25B Windgage Rear Sight (some pitting) - $90.00 . 14) Savage Folding Rear Sight & Elevator - $145.00 . 16) Savage 99 Rear Sight Elevator - $40.00 . 17) Savage 1899 Rear Sight Fishhook Elevator - $40.00 . 20) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 . 21) 8-40 Pan Head Filler Screws (2) - Blue - $20.00 . 22) 3/8" DT Filler - Curved Top - $40.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

82990 impressions

4521 views

Winchester 34C Express Rear Sight - Platinum Line (98%) - $475.00 . Sight is in excellent working condition with all 3 leaves moving freely. . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

4583 impressions

113 views

Tikka T3x Superlite in 243 winchester cailber. I bought & set-up this rifle to be a coyote hunting rifle. I moved into town and shot a grand total of 1 round through it, so it's essentially brand new (new pice: +/-$1325 + G.S.T) and being sold as in-new condition. This rifle was set-up when I purchase it with a brand new Nikkon Monarch 3  4-16 x 42 scope mounted with Leupold Dual Dovetail scope rings & stainless Burris bases. It is also set-up with a nice padded Tikka sholuder sling as well.   Rifle features: • Synthetic stock with fluted stainless-steel barrel lightens the barrel but maintains accuracy • Maximum adaptability with accessories • Safe to shoot and handle with two-position safety • Minimum weight, maximum comfort Specs: Caliber Barrel Length Overall Length Rate of Twist Magazine Capacity Weight 243 Win 22.4" 42.6" 1 in 8" 3+1 6.4 lb. I am also including various rounds of ammo with it: -80 rounds of Winchester 58 gr Windchester varmint ammo- .243 Win (+/-$200 value) -19 rounds Hornady Superformance 58 gr varmint ammo - .243 Win (+/-$80 value) -40 rounds Remington Premier AccuTip-V 95 gr ammo - .243 Win (+/-$50 value) I am asking $1980 for everything listed above. (Like-new Tikka T3x Rifle, Nikkon scope, Leupold Dual Dovetail scope rings & Burris bases, rounds of ammo, and the Tikka rifle sling) Not interested in trades. Located in Stony Plain, AB. Please call if interested (780) 621-6346

categories:Sporting GoodsGuns

5098 impressions

309 views

**See below for specific box availability** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. Seeking various factory boxed cartridge ammunition trades for my 243 Win Factory Boxed Ammunition or cash prices are below. There’s a variety of brands and projectiles available. Looking for 6.5 Creedmoor, 270 Win and 300 Win Mag, I might consider 30-30 Win. This ammo is just a surplus calibre to me now and so trading off my left over ammunition. See pictures for more info. Available as detailed below: Full Boxes, 20rd count Winchester Super X, Power Point, 100gr, 11 boxes available $42ea *SOLD*Hornady Custom International Interlock SP, 100gr, 4 boxes available $42ea Federal Non Typical Whitetail SP, 100gr, 2 boxes available, $40ea Federal Power Shok SP, 100gr, 3 boxes available, $45ea Federal Power Shok Jacketed SP, 100gr, one box available, $45ea Hornady American Whitetail Interlock,  100gr, 2 boxes, $53ea Federal Power Shok SP, 80gr, 2 boxes available, $42ea Federal Premium ELD-X, 90gr, 2 boxes available, $65ea Winchester Varmit X, Polymer Tip Rapid Expansion, 58gr, 2 boxes available, $45ea Federal Premium V-Shok Nosler Ballistic Tip, 55gr, 2 boxes available, $45ea Partial Boxes *SOLD*Winchester Deer Season XP, 95gr, one box of 10rds, $25 *SOLD*PPU Rifleline Ammunition SP, 100gr, one box of 14rds, $23 Winchester Super X Power Point, 100gr, one box of 18rds, $37 **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Local only, Valid PAL required. First Paid, First Served. Holds only with deposit. Delivery Negotiable. 

categories:Sporting GoodsGuns

21916 impressions

1309 views

Hey there, Selling a JP Sauer (As in Sig Sauer) Side by side in 12 gauge. 2 3/4' Chamber. 28" barrels, both choked "Full". Refinished to a glossy burgundy. Euro 1" Sling mounts, so sling included. Great shape overall. Bores are great. No rust or missing parts. No cracks on the side in the wood, in the tang, or on the wrist. Only discloser is some retaining screws on the boxlock got re-tapped. Price is plus shipping, not interested in trades, thx.

categories:Sporting GoodsGuns

956 impressions

72 views

This is a new, very nice, compact shot timer for IPSC, USPSA, IDPA. Use it for range practice to hone your timing. Comes with a black silicon case and lanyard. Frequently on back order. I finally got one just before I had to give up shooting. I can ship in Canada for $21. Features from their website: - Compact, ergonomic design - Clear and informative display with largest time digits - Uses any off-shelf batteries (AAA) - Up to 17 days of continuous match use on a single set of regular batteries. Even if they are close to depletion, you still have enough time to comfortably finish your match - Simple, straight forward, intuitive interface with only 3 navigation buttons, one hand operation - Loud beep: 105dB, 1.5kHz for those who have trouble hearing high frequency tones - Adjustable beep volume - Digitally adjustable sensitivity, you can pick up anything, 9mm, .22 cal, AR, Shotgun, PCC, CO2, hammer fall, striker fall, suppressed, you name it, it will hear anything - Instant or Delayed start - Multiple Par times - Presets - Durable design - 3 strings memory - Ability to display 3 strings simultaneously to compare shots - Auto Power off - Up to 10 minutes long string time, so you can time those long 3-gun stages - For over a year every aspect of design was tested extensively in the field by differents shooters, at different ranges, with different guns, different ammo, at types of matches - Made in USA

categories:Sporting GoodsGuns

1419 impressions

69 views

VERY NICE WINCHESTER 94 , CHAMBERED IN 30-30. MANUFACTURED IN 1971. PREVIOUS OWNER BOUGHT IT NEW, USED IT VERY LITTLE, BROKE THE STOCK AND JUST STORED IT AFTERWARDS. I REPLACED THE ORIGINAL BIRCH STOCK WITH A REPLACEMENT WALNUT STOCK SO ITS ACTUALLY AN IMPROVEMENT. FINISH HAS SOME LIGHT FRECKLES ON THE RECEIVER SIDES  BUT THE REST OF THE BLUE IS LIKE NEW ON ALL THE OTHER METAL PARTS. CLEAN SHINY BORE. SMOOTH ACTION. SHIPPING IS $75 ANYWHERE IN CANADA. CONTACT RENÉ AT 514 713 2310 OR ADCRENE65@GMAIL.COM

categories:Sporting GoodsGuns

569 impressions

70 views

Brand new in box  Vortex® Viper® PST™ 5-25x50 FFP Gen II EBR-7C MOA Riflescope  Vortex VIP Lifetime Warranty Only removed from box to take pictures Purchased two weeks ago for a rifle I have on order but plans have changed and going a different direction so this is up for sale. Paid $1600 asking $1300 Shipping Available

categories:Sporting GoodsGuns

1127 impressions

72 views

This sweet male is available now and has had shots and has been dewormed. The personality of a Pomeranian is fun loving, happy, mischievous and loves the people he is with. Shirley is their breeder- because she lives in a rural area where the reception isn’t always good, she has me take her texts/calls so she can get back to people when she’s got good reception.

categories:Pets and AnimalsDogs

708 impressions

54 views

Howdy Townpost. I've got a number of these brand new Allen slings for sale. The slings I have here are an improvement over the regular Allen Endura. This batch of slings has cam buckles (sometimes called toggle clips) instead of tri-glides. They're easier to use and make attaching the webbing loops to sling swivels really quick and easy. The sling loop sections are longer and could even be used as a carry strap for small logs or something heavy in a pinch. The slings can be adjusted from 28" to 52" so they're quite versatile. The slings are $10 each. I'm currently offering a buy 3 get 1 free deal. The slings are located in SW Calgary and can be picked up almost anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping these as regular or expedited parcels should be fairly cheap since I can roll up the sling into a little roll and put it into a very small box or mailer. I may be able to ship this as an oversized lettermail if I fold one or two slings flat and get them into a large envelope too. So I expect shipping to be $5-19 depending on what option you go with, where the is the package destination and how many slings you want.

categories:Sporting GoodsGuns

18599 impressions

479 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

16209 impressions

478 views

Howdy Townpost. This is a nice little and fair conditioned pocket tip-up revolver, in .30 Rimfire. In the 19th century, XXX was used denote very strong malt liquor. So I think marlin was trying to market in the name that this is a stout little gun. Similarly done by Hopkins & Allen with the naming of their "XL" series of pocket revolvers. These were made by Marlin from 1873-1887 with a total of roughly 26,000 being made. They are essentially copies of the Smith and Wesson Model 1 1/2's and 2's. The mechanical condition of this firearm is excellent. The hammer and cylinder function reliably and as intended. Timing and lock up are excellent. The barrel is tight on the frame. This revolver was tuned by my gunsmith too. The bore is worn but there's some life left in it. There's frosting at the front of the cylinder and the forcing cone. The nickel is mostly present on the frame and the beautiful original rosewood grips are in excellent shape. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

16080 impressions

539 views

Howdy Townpost! I have a unique one for you this time. You there sir or madam! You wouldn't want to travel these dangerous streets without some form of protection under your coat! Have a look at this and turn off barrel pistol with a switchblade bayonet for backup, made by Mr. Nock. You may need it should you encounter any rowdies! This is a single shot box lock percussion pistol. It's a screw-barrel meaning you unthread the barrel, fill the powder chamber and place a ball on top it. You then use the barrel itself and the threads to seat the ball inside of the breach. Then a percussion cap on the nipple, put it at half cock put it in your dapper overcoat and pull it out should you meet any Scallywags on your travels. In my opinion this is an early Samuel Nock made Circa 1840s pistol. Based on comparable examples I've seen and the style of Engraving and construction of the pistol this appears to be an early production Samuel Nock made pistol. Samuel Nock was the nephew and an apprentice of of the more famous Henry Nock. Samuel knock became a very skilled and renowned gun maker in his own right. Most of his guns would be marked S. Nock but some of his earlier stuff had only his last name. I suspect he was trying to trade on his more famous uncle's name at the time. Overall the pistol is in pretty good condition except for a small hairline crack in the frame (pictured). There is some moderate pitting in the bore however it looks worse in the photo than it actually is. This is a smooth bore pistol and is breech loading so the pitting shouldn't make it difficult to load or shoot. This pistol was intended for point blank range shooting by virtue of the fact that has a stubby little bayonet to use in case you missed your target. The pistol mechanically fine. The trigger and lockwork are all in good working order and the spring loaded bayonet mechanism works perfectly. They are often broken because of the small springs and the daily carry type use of these firearms. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

14549 impressions

292 views

Howdy Townpost! I've got a nice little uncommon and good condition subcompact Remington for sale now! This started its life as a Remington Model 1865 New Model Police as a cap and ball percussion revolver in .36 caliber. Many of these were never percussion guns as they existed in a weird transition period. And Remington made some of them from the ground up as cartridge guns. This one most likely was in inventory as a percussion revolver and was turned into a .38 rimfire cartridge revolver based on the serial number, in my opinion. These are one of the more rare and lesser known Remington cap and ball guns that were made. Remington only made 18,000 between 1865 and 1873. So they are relatively uncommon and scarce gun today. This is actually my personal favorite model of Remington percussion revolver they're a very handy subcompact-sized gun by today's standards they're bigger and much more comfortable in the hand in the grip than the pocket models but nice and light unlike the full size military .44s and they point very naturally. This particular example is in very good condition the nickel is a very high percentage of coverage some of the original silver plate is still visible on the trigger guard and some of the low areas. The color case hardening is still very colorful and defined on the hammer (pictured). The grips have been refinished but they are the originals. The wood grain is very interesting and beautiful in my opinion. The bore is in excellent condition especially for a Civil War era black powder firearm. This was likely carried in a police officer's holster and not fired much. It was well taken care of and the clean and good condition bore and chambres are reflection of that. The the mechanical function of this firearm is excellent as well. When I got the firearm it was actually in amazing condition to begin with and the mechanical function was perfect. It locks up and times perfectly. The hammer and the trigger pull are very crisp, light and smooth. And didn't require any adjustment, Remington did the job and they did it right the first time. The entire revolver has been taken apart and given a gunsmith's cleaning and was reassembled and lightly oiled. I came across a nice little Hunter leather holster at a gun show and found that it fit this gun very well so it's included as a freebie with the gun (pictured). The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide too.

categories:Sporting GoodsGuns

15477 impressions

866 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25603 impressions

891 views

Howdy Townpost. I have a really interesting piece for you here. This is a conversion of a conversion rifle. This is a German made Ludwig Loewe Gew 88 that was later converted by the Germans into a Gew 88/05 and most likely given to the Ottomans in WWI as war aid. Many of these were retained and later converted in the 1930's to a Mauser 1935 pattern type rifle. They converted a large portion of their arsenal to this pattern including SMLE's a plethora of their different Mausers, and Gew 88's they had in inventory. This rifle was rebarreled to shoot the modern 8mm Mauser cartridge and re-stocked into a more Mauser-esq stock. This stock features Mauser bolt disassembly disks despite them not being required for the Gew 88 action. The stock on this particular example had a fairly large wood defect that the Turks neglected to address has been fixed. It was cleaned out and filled with Brownells Acraglas epoxy so it's rock solid now. The overall condition is good. The stock was professionally refinished. The bore is excellent, very sharp and clean rifling. The rifle is located in Calgary AB for pickup or I can ship it nationwide on the buyer's dime. PAL will be verified as per C-71

categories:Sporting GoodsGuns

8579 impressions

624 views

Howdy Townpost. I have here a nicely restored Cooey Model 82. I got the gun as an oil stained and sporterized target .22. It's had the stock nicely refinished in a satin urethane finish done in the fashion to mimic an old oil finished stock. The stock has a pretty nice grain pattern on the underside of it (pictured). The bore is excellent. The stock had a chunk out of it to accomodate a Lyman peep-sight and the receiver was drilled and tapped for it as well. That has all been repaired (pictured) and is hardly noticeable now. There was a hairline crack near the middle barrel band that was filled too. It probably wasn't necessary to fill especially on a .22 , but hey she's been filled. It has all the C-broad arrow markings present. The rifle is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

20771 impressions

765 views

Howdy Townpost! I've gotten my hands on some stubby steelies! These are new production Yugoslavian military patterned magazines made in Croatia. These are well made and the milling was done well too. These are all properly pinned to 5 rounds. And are nice for hunting with a shorter mag or hauling it around with a shorter and lighter mag when compared to standard a 5/30 rounder. These magazines will also work with an AK magazine coupler (I have these for sale for $20). Which for an SKS-D some plastic on the coupler must be removed first. The M10X should work with a coupler without issues the same goes for the WK-181 and modded mags in the Type-81. These can be modified to fit into a Type-81. I also have modded mags for sale which are $55 each. I am the only seller who has these Croatian 5/10's in Canada. Even the crappy Gen.1 KCI 5/10's are out of stock practically everywhere in Canada. This is a limited run, so don't miss out. The mags are $40 each. The mags will come in a plastic bag in preserving oil that can be easily cleaned up with any degreaser or simply hot water and dish soap in your kitchen sink with a quick scrub and then dried. It's a good idea too to apply a light coat of gun oil. A single drop rubbed across the entire mag is enough. These mags will fit in the SKS-D, the M10X series, and they might require some hand fitting to work in the WK-181, since Kodiak designed those things with odd magwell dimensions with PMAGS in mind. In all likelihood though, they will work out of the box for you. The magazines are located in SW Calgary and can be picked up anytime. I am also happy to ship nationwide, this is of course at the buyer's expense. Shipping within my region will cost $13-15, and nationwide elsewhere is $18.89 flat rate. If you order more than 6 mags, shipping will be $21. If you want to order a large amount 10+ shipping will definitely be more.

categories:Sporting GoodsGuns

57961 impressions

1370 views

Howdy Townpost. I've a neat old single shot 12 gauge made by Savage. It has a nice and light tenite stock that was sanded at one point to give it a matte finish. The shotgun is very tight and not off the face at all. The gun is very light and handy sitting 5.73lbs. It has a 12 gauge 2 3/4in, 28in full choke barrel. The patent number is molded into the plastic stock interestingly enough. The black paint on the trigger guard is flaking of a little. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

17213 impressions

833 views