Selling a post WW2 Canadian Highpower Holster and Belt. Will work well with any similar sized gun. Overall decent condition, regular wear from use. Selling for $25. Shipping available in flat-rate box at buyers expense. Disclaimer: this item is sold as is and the description is given to the best of my ability and knowledge. Feel free to ask any questions and I will do my best to assist in any way possible. Do not buy this item if you are not sure about it as no refunds will be given.

categories:Sporting GoodsGuns

14297 impressions

625 views

Selling my 1955 Winchester 62A .22 short Gallery gun takedown pump action all matching VG condition *Made in 1955. Accept .22 short. *It is estimated that only 3% of 62/62a were .22 short cartridge, which were used as gallery gun. *Serial number: 331***, all matching, In very Good condition, No rust or pitting or crack *Most of gallery guns are mixed matched for the convenience of daily use, so all matching number ones are more scarce. *Very good shinning blue on receiver and barrel, with only a little used sign. *Loading port is triangle shaped. *Reliable, Great shooting fun pump action .22 Winchester rifle. * A nice collection of small winchester pump action rifle. * Comes with a very nice Vintage Bushnell 4X Banner .22 scope with classic side mount way. -------------------------------------------------------------------- *Price is firm *EMT or Cash Only *PAL is must, need verify *Only consider local face to face trade Thanks for understanding. -------------------------------------------------------------------- Prefer local pickup, shipping with extra cost. Text or email please. You could also check my other ads, there might be something you like. Thanks!

categories:Sporting GoodsGuns

38830 impressions

1229 views

Thompson Center Arms .50 caliber Thunder Hawk In-line rifle has a tapered round 1" to 7/8" x 21" stainless steel barrel with light handling marks to the finish. The bore is shiny and the rifling overall is good and sharp. It has a 1:38 twist and a mounted weaver rail. Bullet loads up to 150grn There are factory mount holes to install a ring-type set up. The Rynite stock has a checkered wrist and forend. The stock has a rubber recoil reducing pad and sling swivel studs. The firing mechanism is set up for the #11 percussion cap or 209 primer and has an outside manual bolt position safety. Length of pull is 14", the overall length is 39", weight is 5.4 lbs. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code. Valid PAL required. Will ship on your dime. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:Sporting GoodsGuns

104179 impressions

8992 views

Breda 710 Semi Auto 12ga (3" Magnum) (Briley Choke) (S/N#160xxx) Based on Browning Auto 5 design. Recoil operated action. Nicely engraved with rubber recoil pad, fiber optic front sight and swivels. Good clean and well cared for condition. No trades. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Section 99 & 101 of the Criminal code. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:Sporting GoodsGuns

77235 impressions

4600 views

Carcano Mannlicher 6.5×52mm Mod 91 Bolt Action with two 6 round Italian enbloc clips for each rifle. Condition as pictured which is average for the era. The rifle on top is older with. On adjustable iron sights. Bluing is mostly worn off and the stock has some wear and tear. Comes with 2 clips. 220$ The rifle on the bottom of the picture is in ok condition. The rear slide sight is adjustable to 1000m. Comes with 2 clips. 260$ No trades. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Section 99 & 101 of the Criminal code. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:Sporting GoodsGuns

34021 impressions

1216 views

Springfield 12 Gauge pump action, 26 INCH BARREL, Camo wrap. Good condition. No trades. CFP/RCMP courtesy of Bill C-71 and JT will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Private sales do not require any information about the firearm. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Section 99 & 101 of the Criminal code. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:Sporting GoodsGuns

25690 impressions

2409 views

Mossberg 817 17 HMR Bolt Action; 3 mags 21" Barrel; Scope Mounts; S/N HJC3101xxx Good as new condition. No trades. CFP/RCMP courtesy of Bill C-71 will require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Section 99 & 101 of the Criminal code. ANY ATTEMPT TO INQUIRE IF A PURCHASE CAN BE MADE WITHOUT A VALID AND CONFIRMED PAL WILL RESULT IN AN AUTOMATIC POLICE AND CFP CENTER REPORT. DON'T WASTE MY TIME WHICH MAY GET YOU TIME!

categories:Sporting GoodsGuns

79892 impressions

5616 views

Well, it’s not too often you come across toys from World War II. These are large lead hollowed out toys that are still in fairly good condition. I am selling them as a lot in a metal green cannister dated 1942. Make an excellent gift for any collector. Included is 4x Submachine gunner One bombing aviator Two wounded soldiers on stretcher One lead soldier at typewriter One soldier resting on trench bag Seven trench bags in total One wounded soldier sitting on a trench bag One soldier crawling One soldier in prone position One kneeling rifle, man One standing rifle, man One rifle man with gas mask To anti-aircraft gunner One soldier, anti-aircraft gunner One spotlight soldier Two automatic machine gun gunners You get everything you see in the pictures that are provided in one package 📦 Can ship anywhere Please see my other ads for rare and collectable military items

categories:Household ItemsCollectibles

508 impressions

41 views

I am Federally licensed as a dealer, and looking to purchase an inventory of hunting style firearms and hunting accessories. Best prices paid in cash. NO Consignment. An "in person" inspection of condition is required. I do travel often for purchases over 5 firearms. Call or Text message to 403 556 0086 is the best way to contact me with pictures. email works to tim at vhmulcher dot com. Voice calls are appreciated and evenings are ok. I am retired so buy/ sell/ trade, collect, repair, keeps me entertained. Covid rules are followed and I have three shots. May consider in person "trade ins" but need to see them in person first. No exceptions unless new in box. PAL required upfront ahead of sending you pictures. Please see my firearms by clicking "TCVH" on this page. I am located in Reddeer County, Alberta. Calls or text messages to 403 556 0086 Shipping usually next day. Expect 25 to 35 $ additional. Payment by etransfer, cash, Canada Post transfer or their money order. NO COD As a "collector" of hunting firearms with several aspiring Grandchildren Hunters I keep some NOT advertised. "NEED A SPECIFIC HUNTING GUN ?" Send me your details and see if I can assist you with your search. 

categories:Sporting GoodsGuns

668872 impressions

30947 views

Hey i have for sale a very nice winchester model 12 black diamond trap that I had intentions on keeping with me till death lol but unfortunately I have got to sell it to someone who hopefully appreciate it like I did.. I have 2 of these and I am going to be selling them both😣.. so here is your chance to get a real beautiful piece of winchester history that took me a long time to find these guns are a real piece of work.. please check out my other adds for other winchester collectors shotguns

categories:Sporting GoodsGuns

539 impressions

75 views

Hey i have for sale a very nice winchester model 12 black diamond trap that I had intentions on keeping with me till death lol but unfortunately I have got to sell it to someone who hopefully appreciate it like I did.. I have 2 of these and I am going to be selling them both😣.. so here is your chance to get a real beautiful piece of winchester history that took me a long time to find these guns are a real piece of work.. please check out my other adds for other winchester collectors shotguns

categories:Sporting GoodsGuns

502 impressions

78 views

Looking to sell, or trade my Ruger American Predator 6.5 creedmoor. The gun has a few scuffs from hunting use, but shoots flawlessly. Has under 150 rounds down the barrel. The gun is topped with a Vortex Crossfire 3-9. It will also come with a Cabelas sling, and 3.5 boxes of ammo. Interested in other rifles, preferably higher caliber. Can add a bit of cash on top depending on the offer. Valid PAL required. Thanks.

categories:Sporting GoodsGuns

1471 impressions

114 views

Both are made in Brazil, both are fixed full and mod chokes. Several wood only dings in both but no cracks and very little metal wear showing a very low round count. No issues. Selling both at once. 28" is a Condor 1. by IGA What a nice Christmas Gift .... get your buddy into trap shooting over the winter ...  A great Christmas Present .... No cracks or issues.  Please use cell phone text messaging. Courier Shipping, if needed,  at your cost. If you have a hunting firearm you would like to "trade in" and if you can drive to me, ( Innisfail, Alberta, just south of Reddeer) I will consider your in person (only, no exceptions please) trade ins . For quicker response : Please call or text 403 556 0086 Please see my other ads. I have lots of rifles, shotguns, Scopes / ammunition / slings / cases etc available for extra. I can mount and bore sight for you too. PAL verification required. NO COD, cash or e transfer payment needed. Return customers / locals always given preference.

categories:Sporting GoodsGuns

7652 impressions

372 views

Howdy Townpost! I have a truly amazing one of a kind piece here for sale. I bought this for myself in the US over a year ago and I had it professionally restored and fully repaired. I am now looking to sell it. John Forbes, of Liverpool, was gunmaker to His Royal Highness, the Prince of Wales, later King George IV. And according to my research made mostly dueling and target pistols, and some small pocket pistols for only 5 years. Those years being 1805-1810. He spelt his name with I or Iohn and later switched the spelling to a J or John based on public records and some of the other examples of his dueling pistols that have sold at auction. That makes this a very rare and finely made pistol. This pistol would have cost a small fortune at the time it was made. Oftentimes dueling pistols come in pairs but it was cheaper to buy just one if they were offered as a single, and should you encounter someone who has insulted your honor and you demand satisfaction from them, they can bring their own pistol to the duel. The engraving is extremely fine, intricate and skilled. It would have taken many dozens of hours to complete and it was all done by hand. The engraving features drums, banners and spears, floral patterns, sunbursts on the base plate and lock, and a pineapple in the front of the trigger guard, which symbolizes wealth and status. Because this gun is a percussion conversion of the original flintlock mechanism the percussion hammer is engraved in a different style by a different engraver in a more simple floral and fish mouth style of engraving with gold inlay. Every screw is engraved to look like a flower and the escutcheons are also each engraved like a wreath. Overall there is a lot of fine detail with some simpler and less detailed later additions on the percussion mechanism and one spot on the side plate. The gun features gold inlay on the hammer which largely worn away. There is silver inlay on the outside of the breach, and a sterling silver wreath styled band wrapped around the base of the grip and a sliver bead front sight. The ramrod tip (which is a replacement) is silver plated brass, so too are the front stock cap near the muzzle, the rod pipe, cross key, and escutcheon around it are too. The grip baseplate is silver plated steel. The workmanship of this pistol is certainly of a quality of gunmaker worthy enough of being the gun maker of the Prince of Wales. The pistol is located in Calgary AB for local delivery or pickup. Or I can ship it too.

categories:Sporting GoodsGuns

12563 impressions

417 views

Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

19834 impressions

730 views

GENTLY USED FIREARM in excellent condition. Maybe 20 Rounds or so fired. Kept in a safe and cleaned after each use. Henry Classic Lever Action .22 Magnum Model Number H001M Action Type Lever Action Caliber .22 WMR Capacity 11 Rounds M.S.R. Price $609.00 usd plus taxes Additional Specifications Barrel Length 19.25" Barrel Type Round Blued Steel Rate of Twist 1:16 Overall Length 37.5" Weight 5.50 lbs. Receiver Finish Black Rear Sight Fully Adj. Semi-Buckhorn Front Sight Hooded Blade Scopeability 3/8" Grooved Receiver Scope Mount Type Ringmounts for 3/8" Groove Stock Material American Walnut Length of Pull 14" Safety 1/4 Cock Best Uses Target/Hunting/Small Game ***I paid over a $1000.00 cad.*** PRICE: $900.00 or best offer PREFERED: via cash or email transfer SHIPPING & DELIVERY EXTRA *** delivery is only available for Saskatoon area ABSOLUTELY NO HOLDS PLEASE ONLY SERIOUS BUYERS TO PURCHASE: A VALID PAL IS REQUIRED NOTE picture is similar to the rifle I am selling ***NOT MY PICTURE

categories:Sporting GoodsGuns

8689 impressions

477 views

I'm selling my Weihrauch Hw100 in .22 calibre, it is the full kit absolutely everything you need to get shooting. It comes with a divers bottle which is in test, the hose and connections. The rifle is the full length version which means more shots per charge and has a beautiful walnut stock, and the rifle is so quiet and accurate it is quite uncanny! 5p size groups at 40 yards is the norm with this gun, fitted with the excellent Weihrauch silencer. The rifle is fitted with a hawke scope with adjustable magnification and has got the caps on to protect it, and it is a very clear scope. Rifle also comes with gun bag, all fittings, and instructions. Excellent kit for vermin control or target shooting.

categories:Sporting Goods

2294 impressions

555 views

PLEASE READ DESCRIPTION! unable to post all photos so see info below. A large variety of rings for sale. Prefer to sell larger bulk packs. Shipping is extra. Some smaller orders can be shipped cheap via regular letter mail. Prices do not include shipping. See my other post for a list of bases available. MILLET Nickel 1 inch turn in low $30 Nickel 1 inch turn in medium $30 Nickel 1 inch turn in high $30 Black matte 1 inch low $30 Black matte 1 inch medium $30 Black matte 1 inch high $30 Black matte 1 inch extension rings medium $50 Black matte 30mm low $35 Black matte 30mm high $35 Ruger M77 superhawk Nickel 30mm rings $50 Ruger 77/22, No.1, No.3, 96/44, Ranch Nickel 30mm mediums $50 Tikka angle loc 30mm medium Black matte $40 Sako angle loc 30mm mediumBlack matte $40 SAKO angle loc 1 inch high $40 WEAVER SIDE MOUNT 1" LONG BRACKET & RINGS HIGH BLACK, ITEM#49340 $50 Weaver grand slam medium 1 inch turn in rings $30 Medium silver 1 inch high quad lock extension rings $25 Medium silver 1 inch rings $30 BROWNING/TALLEY Browning AB3 scope mounts 1 inch, medium height $40 Abolt mountain TI Scope system $30 LEUPOLD STD 1 inch low gun metal grey $25 Rifleman 1 inch high silver $25 Leupold sako 1 inch rings and base silver mediums $100 DURASIGHT integral mount for CVA, traditions, winchester in lines. And t/c omega, triumph $25 SAKO Optilock silver rings new in pkg $100 optilock silver 1 inch low rings $100 Optilock silver bases $80, Optilocks Black 1 inch $70 Optilocks Black 1 inch extension base $90 Vintage sako 1 Inch see through rings SOLD

categories:Sporting GoodsGuns

64147 impressions

4180 views

I picked this up a while ago and have never used it. It was going to be my bug out gun but life changes and i need to downsize my collection. There is some pitting on the receiver. Bubbad metal work to fit the mag. Rifling looks good. Wartak skar sd-r scope rail. And AR magwell adapter. There is a bit of finish work that needs to be done. The ammo stovepipes unless you put a shim behind the mag then it cycles fine. Might be an easy fix if you have the right tools. Topped with a Burris fullfield 3-9x40 at the moment. $1500 for the rifle, magwell, rail and scope. 1500rd crate of Chinese corrosive. extra $500. Not selling ammo unless it goes with the rifle or the rifle sells first. Might take a partial trade in quality bulk 308 ammo or a 22lr in Henry, ruger, or savage. Must have a valid pal

categories:Sporting GoodsGuns

38233 impressions

3223 views

Howdy Townpost. I am selling this Remington 3.5inch Super-Mag that I picked up from BassPro in Calgary. I never got around to shooting it but I got a deal on it so I'm willing to let it go for cheaper than usual. This was a store demo gun, which essentially means it was dry cyled and shown to customers a few times. It's more or less a brand new shotgun. There's hardly any wear on it with the exception of some cosmetic blemishes from some small patches of surface rust that formed on the parkerized receiver. I suspect they never oiled it and peoples hands or just some moisture caused it. I cleaned it off and oiled the whole gun. It's pretty smooth even though it's a new gun and hasn't been broken in. The rubber recoil pad is still nice and soft The date code looks like AJ so it's a 2015 production. It was kicking around BassPro for almost 11 years! These regularly retail for $750+tax but occasionally go on sale for $650+tax. So I think $630 with no tax is not a bad deal for an essentially brand new shotgun. The shotgun is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. It's pretty short when broken down, and is light so it should be relatively inexpensive to ship. If you live in Alberta I do get around the province a fair bit throughout the year, so if I happen to be heading to your area maybe we can do a meet up along the way on my travels to save you the shipping costs. PAL will be verified as per C-71.

categories:Sporting GoodsGuns

2630 impressions

151 views

I'm back to printing and selling my 3d printed ammo cases! Each case holds 100rds. The standard cases are for 22lr / short and are unmarked (unless added on), and the .17HMR and .22 WMR cases have sunken in labeling on the side. Colours can be mixed and matched to make them as custom as you’d like, nothing beats an ammo case that matches the rifle! Each case consists of 1 box, 2 inserts and 1 lid. ————pricing———— 50rd .22LR cases - 8$ each (minimum of 2 required). +1$ each for ammo type or brand printed on lid. .22lr /.17Mach2 case - 12$ each. +2$ each for ammo type or brand printed on lid. +2 for Labels on sides or ends. 200rd .22LR cases - 24$ each. Comes with 4 inserts. +3$ each for ammo type or brand printed on lid. +2$ each to fill labeling with black or white epoxy. .17HMR / .22WMR - 14$ each. +2$ each to fill labeling with black or white epoxy. +2$ each for ammo type or brand printed on lid. Custom Designs, Filament types and other add-ons can be discussed as well! The more custom, the better! Bulk rates available on larger orders. Most orders will be printed on demand so please allow a few days to get everything printed and shipped out. Bigger orders take more time and custom requests of ammo brand or type on lid take extra time to design and print. Shipping is on buyer. I generally use Canada post flat rate boxes but I can do up a quote based on postal code to get the best price. If you have any questions please reach out or if you’d like some photos of something not pictured. Check my ads in the near future for more 3d printed firearm items as I aim to have an inventory of handy shooting items or fun and useful projects!

categories:Sporting GoodsGuns

24882 impressions

703 views