Howdy Townpost! I'm looking to sell my rare bird antique revolver. Husqvarna made 13,619 model 1887 revolvers over the course of 9 years between 1897 and 1905. Of those only 350 were made in 1897, and thus those are the only antique status Husqvarna model 1887s in Canada that are recognized by the RCMP CFP Lab Technicians. This is one of them, number 260. These are not common to say the least. These revolvers are chambered in the 7.5 mm Nagant cartridge. The chamber dimensions are essentially almost identical to the 7.5 Swiss revolver cartridge used in their model 1882s. So you can make proper brass and the proper dimensional cartridge for this gun using either .32-20 Winchester, .25-20 Winchester, 7.62mm Nagant (1895), or 8mm Lebel Revolver brass as parent cases. I have some virgin 7.62 Nagant brass that I'll throw in as a freebie to the buyer and there's like 50 pieces in this bag. Or the more expedient way to shoot this gun is to shoot 32 Smith & Wesson long or short as an inexpensive and smokeless off the shelf ammunition. This is commonly done in Switzerland with Swiss model 1882 revolvers, and given that this has almost essentially identical chamber dimensions (they Husqys are actually little a bit tighter) you can do the same. So I decided to give it a whirl with the .32 S&W and was actually very pleasantly surprised by my results. My best three round group at 25 yards with PPU .32 Smith and Wesson Long with round nose lead bullets was 2 inches. Those were the first three rounds I fired through the revolver but the three following rounds in the same cylinder opened up to a 5 inch group as the barrel heated up. I still have the target and can provide a photo of it upon request. I imagine any almost any .32 Smith & Wesson standard velocity factory ammunition would be fine to shoot in this except Sellier & Bellot because it has a fairly small diameter rim diameter and the rounds sink into the chamber and will not headspace properly and the hammer can't reach them. One in five cases bulges and splits open, but the majority of rounds fired essentially fire form to the chamber and could be possibly reloaded in my opinion. Overall the ammunition performs surprisingly well for being how undersized it is and as long as you use lead bullets or maybe a hollow-based jacketed bullet, the bullet will expand and grab the rifling and stabilize very well and achieve good accuracy. The revolver is all matching except for three parts. The cylinder is an unserialized replacement. The trigger guard and the side plate are also replacements in the 4200 SN# range. The chambres and bore are all in excellent condition. There is one spot of extremely shallow corrosion sot in the bore and that is pictured. Beyond that, the bore is sharp with tall lands and is mirror shiny. And all of the chambers are very clean and shiny as well. They are also pictured. Overall the gun is in very good condition the most noticeable wear is on the color case hardening that is on the loading gate trigger and loading gate spring. The non-matching side plate was reblued to more closely match the original blue on the frame. I will include a little document dossier I've put together in a binder that provides documentation on this firearm. It includes a copy of the Firearms reference table entry or FRN, a copy of the regulations prescribing antique firearms, and some copies of emails I received from the RCMP lab technicians confirming their opinion of the antique legal status of this particular example SN#260 revolver that I received in order to import this firearm easily. So all of your legal bases are covered. The revolver is located in Calgary AB for local delivery or pickup. Or I can ship it nationwide on the buyer's dime. I can do Alberta meetups too. It depends on the time of year though and whereabouts. I too have video footage of me shooting this firearm with 32 Smith & Wesson ammunition and the target I used I just have to edit the clips together and upload them to YouTube. I haven't got around to doing that yet. I suspect the revolver will be sold before I get around to doing that, but I will upload that footage regardless for the buyer. But for now you'll have to take my word for it until I upload the video and if that's not good enough for you then you'll probably miss out on the sale cause it's exactly what happened with my .38 Special converted Colt model 1889 that's sold in less than 24 hours.

categories:Sporting GoodsGuns

25603 impressions

891 views

Chiappa LA322 TakeDown Lever Action Carbine, 22 lr, 920.383 The lever-action 22LR is an American classic. Chiappa continues this legacy by using modern technology and materials to produce the LA322. This beautiful rimfire is as attractive as it is functional. Accurate, quick handling and rapid shooting, the LA322 embodies all the qualities that Americans want in a lever-action rifle. A 3/8in dovetail is machined into the top of the receiver for optics. Another coveted feature is the take down design for easy transport and storage. SKU: 920.383 EAN: 8053670717282 Type of Gun: Rifle Caliber: 22 Long Rifle Action: Lever-Action Barrel Length: 18.5″ (470 mm) Capacity: 15 Feed In: Magazine Tube Trigger System: Single Stock: English Style Wood Forend: English Style Wood Front Sight: Fixed Tunnel Rear Sight: Adjustable Elevation & Windage Buckhorn Style Safety: Half Cock Hammer Weight: 5.52 lbs Length: 35.5″ (902 mm) Material: Alloy Frame / Steel Barrel Finish: Blued Lever Style: Standard Extraction: Auto Ejection FAMILY OWNED – SINCE 1958 – MADE IN ITALY The History A curious nature, a passion for firearms and a love for challenges have always guided our path at Chiappa Firearms. There will always be another challenge to take on and we’ll not be afraid to play the game. The history of Chiappa Firearms began in 1958, when Ezechiele (Oscar) Chiappa opened his company and called it Armi Sport. Initially an artisanal workshop, the company has grown over the years to become an industrial group, still wholly owned by the Chiappa family. Chiappa includes the companies Chiappa Firearms S.r.l. (defense, sporting and replica firearms), KIMAR (blank and signal guns), ACP (training systems), Costa S.r.l. (surface treatment of metals) and Chiappa Firearms USA, Ltd. (USA’s distribution center). The success story of the Chiappa derives from a combination of factors, among which are a great technical experience matured over 60 years; ability, the courage and entrepreneurial spirit of the President Rino Chiappa, and the total dedication to work of the whole Chiappa family. These capabilities have lead Chiappa to a series of winning choices, focusing on technological advancement, on understanding and meeting the needs of the market while constantly introducing new models, but also offering accuracy and continued support to customers. All stages of production are carried out entirely within the company. The manufacturing process begins with the design of the 3D model, followed by the realization of prototypes and the transfer of data to CNC machines. Through specific CAM software, the machining equipment is able to produce any component in a very short time taking instructions directly from the 3D drawings. Order and organization are common to all factory departments: the workshop with numerical control machines (CNC) for the processing of components machined from solid steel such as receivers and breeches, or for the realization of all types of stocks and other small parts; manufacturing of barrels; die casting and molding of plastic material; ovens and equipment for heat treatment; surface treatment, such as bluing, parkerizing, nickel plating, as well as equipment for grinding and polishing of metal and wood components. The entire manufacturing process is managed and coordinated by a computer system that encompasses all steps of production. This system allows for a thorough control of the execution time, thus keeping production costs tightly monitored. Finally, all firearms are visually inspected and test fired in the shooting range built inside the company before being brought to the packaging area. Thanks to the experience of the personnel, the tradition of artisan craftsmanship cohabits with a modern organization within the same factory, fostering maximum efficiency. Chiappa manufactures a wide range of models. The catalog includes replicas of American historic weapons and muzzleloaders, lever action shotguns and rifles, handguns and rifles in .17 and .22 rimfire, sporting and self defense handguns such as the famous Rhino, signal guns and air guns. As a direct result of the optimization of the manufacturing process, all Chiappa products are an excellent value. Chiappa today is a rapidly developing, constantly evolving corporation. The great capacity to innovate with flexibility and dynamism, the wide range of products and the excellent value for the consumer have allowed Chiappa to spread sales in 60 countries, being fully able to compete with the biggest companies in the world.

categories:Guns

48300 impressions

3821 views

Superb French flintlock pistol, typical of the handguns used in the 18th century by officers and travelers. This model features a solid wood stock with a natural patina, as well as a well-preserved steel flintlock. The short, flared barrel, combined with its robust mechanism, makes it an iconic piece of close-range defense weaponry from the period. Features: • Type: Flintlock pistol • Origin: France • Materials: Wood and steel • Approximate length: 20 cm / 8 inches • Condition: Good overall condition for its age, mechanism present, authentic signs of wear • Authenticity: Original piece, not a replica Highlights: • Ideal for collectors, museums, or military history enthusiasts • Beautiful patina and period details • Rare and sought after by antique weapon enthusiasts Price: $1,295 Delivery: Secure packaging, shipping available See our other weapons for sale! Contact us for more information or additional photos!

categories:Sporting GoodsGuns

564 impressions

52 views

Superb flintlock blunderbuss from Libya, an iconic weapon of the 18th and 19th centuries, used for close-range defense and naval combat. This model is distinguished by its flared barrel, typical of blunderbusses, allowing for a wide dispersion of projectiles. The wooden stock features handcrafted engraved motifs, and the brass fittings add a touch of oriental elegance. The flintlock is well preserved, with hammered metal details that attest to its authenticity. Features: • Type: Flintlock blunderbuss • Origin: Libyan resistance during Italy's attempt to colonize Libya • Materials: Wood, steel, and brass • Approximate length: 24 inches • Condition: Good overall condition for its age, with a beautiful patina and functioning mechanism • Authenticity: Original piece, not a replica Highlights: • Rare and sought after by collectors of oriental weapons • Decorations and finishes typical of the North African style • Ideal for collection, exhibition, or historical reenactment Price: $2,995 Delivery: Secure packaging, shipping available See our other weapons for sale! Contact us for more information or additional photos!

categories:Sporting GoodsGuns

354 impressions

67 views

01.Browning BAR MKII 300 Win.mag 3 round mag.-$100.00 02.Browning BAR Belgium 300 Win.mag 3 round mag.-$80.00 03.Benelli Lupo 4rd Magazine Magnum Action .300 Win Mag-$80.00 04.Benelli R1 .300 WSM original mag.-$100.00 05.PMAG Magpul 308/7.62 NATO 5 rounds mag.-$40.00 06.XCR-M .308 win. 5-Round Pistol Mags-$40.00 07.AR15 5 Round 20 GA. Magazine-$40.00 08.Winchester 88 Caliber 243 WIN or 308 WIN 4 Round Magazine-$240.00 09.VZ58 7.62x39 5 round short magazine-$40.00 10.Browning X-Bolt Long Magnum Magazine 388 Win Mag, 300 Win Mag, 7mm Rem Mag.-$75.00 11.Ranger XT3 .410 Bore 5 Round Magazine-$65.00 12.Savage 220 2 rounds mag.-$40.00 13.Browning AB-3 300 Win.Mag. Black 3 RD-$80.00 14.Sauer 303 Factory Original .300 Win Mag 5 Round Magazine -$300.00 15.Sauer 200/202 Factory Original .270/30-06 5 Round Magazine -$300.00 16.Heym SR30 270/30-06 Factory Original 3 Round Magazine -$300.00 17.Colt/Sauer 90 FN Factory Original .300 Win Mag 3 Round Magazine -$300.00 18.VZ58 4 magazine leather pouch –$40.00 01.CZ 457, CZ 512, CZ 455 steel magazine .22 LR | 10 round-SOLD 02.Savage/Stevens/Lakefield 93/305/310/502/503 22WMR 5rounds mag-$40.00 each 2pcs. 03.Zastava CZ99/MP22/Rem model 5- 5 rounds .22WMR mag.-$45.00 each 7 pcs. 04.Ruger 10/22 Rotary Magazine - .22LR, 10-Round-SOLD 05.Savage A17 17 Hornady Magnum Rimfire (HMR), 25 Rounds,Butler Creek Magazine, Polymer Black-$45.00 each-3 pcs All are used except when specified as "New". They all work in the correct gun model. Some may need fitting. All prices NOT INCLUDED SHIPPING cost! Shipping extra!

categories:Sporting GoodsGuns

271799 impressions

13365 views

For sale is a brand new (in-box) Ruger-made Marlin 1895 GBL "Guide" model, chambered in .45-70 Govt. This model has a brown laminate (checkered) stock & forend, with satin (blued) metal finish. It has a 19.1" cold hammer-forged barrel, threaded for a muzzle device (also c/w a thread protector). It also has a 'big-loop' lever (for ease of use). It comes with semi-buckhorn (adjustable) sights. In addition, a Mid-West Industries (MI) picatinny lever-rail is installed from the factory (for mounting optics). The box, and all other accessories (owner's manual, cable lock, hammer extention, tags/stickers etc.) are included as well! It is in excellent plus condition and has never been used (except factory test rounds).

categories:Sporting GoodsGuns

12298 impressions

501 views

Offered for sale is an original World War 2 U.S. military .45 ACP “Pistol Ball” ammunition in box, produced by Frankford Arsenal (F.A.) during WWII. This is an open 20-round box of genuine WWII-era ammunition. Caliber: .45 ACP Type: Pistol Ball (FMJ) Quantity: 20 rounds Manufacturer: Frankford Arsenal (F.A.) Ammunition Lot: F.A. 665 Era: World War II (early–mid 1940s) Condition: Open on one end – original cartridges present Cartridges appear to be correct WWII-era copper full-metal-jacket ball rounds. The box shows age wear and an open end consistent with long-term storage. This ammunition is standard U.S. WWII service .45 ACP, issued for use in: M1911 / M1911A1 pistols Thompson submachine guns M3 “Grease Gun” submachine gun Frankford Arsenal was a primary U.S. government arsenal supplying ammunition throughout WWII. Price $50  Located In London Ont

categories:Sporting GoodsGuns

415 impressions

32 views

Offered for sale is an original World War 2 U.S. military .45 ACP “Pistol Ball” ammunition box, produced by Twin Cities Arsenal (TW), circa 1943. Caliber: .45 ACP Type: Pistol Ball (FMJ) Quantity: 50 rounds Manufacturer: Twin Cities Arsenal (TW) Lot Marking: LOT TW S Era: World War II, circa 1943 Condition: Open box, complete with original cartridges Cartridges are correct WWII-era copper full-metal-jacket ball rounds and appear clean. The box shows honest wear for 83 year old cardboard overall it's in great condition.  Historical Context: This ammunition is standard U.S. WWII service .45 ACP, issued for use in: M1911 / M1911A1 pistols Thompson submachine guns (M1928A1, M1, M1A1) M3 “Grease Gun” submachine gun Twin Cities Arsenal operated from 1942–1945 and was one of the primary U.S. government arsenals supplying .45 ACP ammunition during the height of WW2 combat operations. Price: $140  Location: London, ON Check my other ads for more. Thanks

categories:Sporting GoodsGuns

406 impressions

40 views

Firstly I barely remember how to even play MTG let alone what the fk World of Warcraft game cards are. What I can say and do know is these were just received by me and I own them now as part of a family estate sale unfortunately so it legally did cost me and notary and having greedy parents and siblings isn’t fun frankly I didn’t even want these things but it was insisted in a will and I know somethings like these need to be properly protected and stored to be of any value and I don’t even trust what little family I left to do that.Digressing before I take these to some sweaty cardshop and either ask the employees at the place what they are worth get lied to and told “10 bux.” Or throw me a booster pack of Pokemans cards then display some random card I have for $3,000 in a 4 bolt locked case like I’m an NPC in TCG Manager or better yet ask the nerds in the store playing in sweaty 90 hour tournaments I figured I would check online first and I was told that FB marketplace is often the hip thing todo these days (what do I know I was 10 years old when Magic the Gathering came out and haven’t played last since I was like 12 which was like 1996: there are (and I’m guessing here) at least 300 to several hundred Magic cards and when I checked about 8 random cards there might be some World of Warcraft cards mixed in though I was told this is limited and I didn’t even know Wizards of the Coast made a WoW card game. These are seemingly in mint or near mint condition as I was also told this and my previous family member owner was OCD about that stuff it seems like a couple also have plastic sleeves with support backings to not bend or so the cards are extra protected. Now while I also have no clue in hell what any of these are worth by looking at them even if I checked all of them I would guess wrong. I know they were apparently from booster packs whatever that means. And they are 100% unsearched unchecked and unappraised aside from the ones I used in the pics and 2 random WoW cards I pulled out last night and apparently have been kept in this 2 foot cardboard shoe box full basically end to end and that seems to me like several hundred cards. I don’t know but I do remember the original graphics on the back of the cards which are there, I don’t know but my family member who is no longer around had more than this but sold them or something and may have kept the most valuable and possibly the original non reprinted versions that came out originally if that’s the case they gotta be worth something so anyone who is looking for a box full of Magic the Gathering and some extras in apparent mint condition/protected that might at least give you a more than good chance of finding a rare and valuable card missing from your collection or this box being worth a few hundred to a few grand. Its your lucky day? Again myself nor anyone else who knew my family remember nor did anyone else search, check, review, research, appraise, truly value these cards aside from the several I pulled out at random just prior to and for the pics for this ad. In addition to this I again have no freaking clue what any Magic Cards are worth these days especially if there are decades old originals in here which I am assuming there are maybe the one that might be in here is the one like the Dragon card I ripped to shreds as a kid that was worth like 20 bucks back then. Hundreds now maybe? For all I know I should be getting these officially sent away to the offical appraisal services that encase them all in clear epoxy and grade them then stamp them and for several hundred dollars mail them back in velvet bags. And there is a card in this converse shoe box worth 5 grand, I really don’t know even if I checked all of them. But ultimately I don’t want to sell them to a card game shop owner who rips me off. I haven’t checked the value of the ones I looked at. I want these to end up with an honest collector legit. I hope an honest collector makes an offer/request so they can valuate until I do auction. equal trade pls in my ads-gold diamond pinky ring, gold/diamond 10-24k chunky bracelet. A dumb tv 55”+ no issues like new condition & base, lightweight coffee table similar to the lifetimes, office desk&good desk chair. Antique firearms collector like grandfathered specifically small 6 shooters old Derringers.Reales/pieces of 8 or Gold Escudos etc real period ones even ones in pendants or set in rings.pre 1964 90% constitutional silver or earlier bags or cans of all kinds of 90% silver coins liberties any pre-1933 American Constitutional gold coins 5 dollars-50 dollar specifically half or double Eagles.EMUs.pure bullion USA Canadian, Valcambi bars any bars or maples silver/gold bullion from 1 gram 1/10, 1/4 to 1 Troy Ounce(ozt) and again if it’s worth close to what I’m offering and you are willing to trade or even partly sell mix options are fine. -13-inch Macbook M4. Again no one + me knows what most of these cards look like let alone their values.Thanks GL!

categories:Household ItemsCollectibles

5673 impressions

991 views

HAD A STROKE AND MOVING CLOSE TO KIDS. 1980 BOXFORD MODEL 330 IS 13X40, 1/12 BORE, 3PHASE 220VOLT (PHASE CONVERTER INCLUDED) 2.5/1.75HP 2SP MOTOR,30-3000 RPM, ELECTROMAGNETIC BRAKE, CHANGE GEARS FOR 31/2-128 TPI (.2-7MM),TAPER ATTACHMENT, COOLANT PUMP, 4-JAW PRATT BURNERD CHUCK, 3 JAW PRATT BURNERD,6 TOOL HOLDERS DREHBLITZ 7.5 DEGREES ADJUSTMENT, 10'' FACEPLATE, STEADY REST,MISC TOOL ACCS. $50,000.00 #1 MILLING MACHINE,R8 SPINDLE, USED FOR MOSTLY FLUTEING BARRELS, 220-3400RPM, PULLEYS, 1''X 8"X 36'' ALUMINUM TABLE EXT., 20'' TABLE TRAVEL,SERVO POWER FEED,TILT HEAD 45 DEG., SWIVEL HEAD, $15,000. LARGE TOOL BOX WITH INSERTS, DRILL BITS & MISC.MEASURING INSTRUTMENTS. $3000.00. RIFLE BARREL CART WITH MISC TAKE OFFS, $1000.00 #2 MILL IS A CRAFTEX 601, 33 X 81/2 TABLE, CUSTOM STAND FOR COOLANT,DC VARIABLE SPEED, 50-2300RPM, 110VOLT- 12AMP, 4"HOLME VISE, 6'' DIVIDING HEAD, R8 SPINDLE, $8000.00. GUN RACK FOR STANDING GUNS, 2- 6'' GRINDERS'. WORK BENCH WITH VICE & BBL VICE, $3000.00. MISC. JIGS AND FIXTURES, DRILL PRESS WITH HEAVY STAND MADE WITH VICE AND 2 TON ARBOUR PRESS, $1000.00 BALDOR 10" BUFFER WITH STAND, POLISHING GRIT, WHEELS, $2000.00-4 BLUING TANKS WITH STAND AND SOME RUST BLUE, $1000.00 8"BANDSAW LIKE NEW, $750.00. BLASTING CABINET IS SILICONE SEALED FOR INDOOR USE, ALO GRIT, NEEDS A VACUM, $1000.00 3 MONTHS OF TRAINING WITH MACHINES(I HAVE LOTS OF WORK)$10.000 MONTH IF NEEDED.

categories:Sporting GoodsGuns

3705 impressions

295 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have for sale a new Canuck Folding Enforcer 2 Pump-Action 12 Gauge 3” Shotgun - Model CFE2 1212 (Tri-Folding). I am the first owner but haven’t fired this new rifle. It’s got the following features: - 3+1 capacity - 12” Crome lined barrel - Aluminum receiver, extractor - Mobil chokes (F,M,C) - 10” Mobil threaded barrel extension - 1913 Rail Fore End
 - Fore End Handle **SEE MY OTHER RIFLE COMBO, BINOCULARS, AMMO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. NO TRADES First Paid, First Served.
 Holds only with deposit. Delivery negotiable.
 Buyer pays for shipping costs and makes arrangements for rifle payment. Product video of Canuck Folding Enforcer 2 (at the 8:00mins time stamp) https://youtu.be/K62WCCu8CHc?si=sCNq3hQ6CmBou2Uq PRODUCT DESCRIPTION Canuck specializes in manufacturing high quality hunting and sporting shotguns. They have been producing other well known, brand name shotguns for years, acquiring experience, knowledge, and excellent workmanship in the process, while saving their most innovative ideas for their own line of firearms. The result is a line of stunningly beautiful, masterful, and technically sound firearms. The solidly constructed Canuck Folding Enforcer 2 will more than fulfill your shooting needs. From home defense to backpacking in the wilderness, the Canuck Folding Enforcer 2 is the perfect choice! When it comes to reliability and performance, no other folding pump-action shotgun in its price range compares to the rugged Canuck Enforcer. Model # - CFE2 1212 Gauge - 12 Gauge Chamber - 2-3/4" or 3" Capacity - 3+1 Sight - Fixed Front, Fiber Optic Front Sight Barrel Length - 12" Choke -F,M,C Stock - Tactical Folding (Polymer) Forend - Tactical Ribbed (Polymer) Rails - Picatinny Top Rail For Optics and Forend With Picatinny Rail Overall Length - 34" Overall Length Folded -18" Weight - 5.6 lbs

categories:Sporting GoodsGuns

37620 impressions

3240 views

For sale is a Stevens savage 12 gauge shotgun model 820B. 28" barrel 2 3/4" chamber. Wood stock and fore grip. The gun is old and shows signs of use. See pictures. If you have any questions or would like more pictures please feel free to call, text, or email! +tax +shipping Local pickup is available 250-753-3355 (call or text) *must have valid PAL to purchase*

categories:Sporting GoodsGuns

10887 impressions

1152 views

For sale is a Sako A3 Finnbear rifle. Serial number dates to 1979. Chambered in 7mm rem mag. The gun is in good condition for its age. The stock shows signs of use. The barrel bore is very clean. See pictures. The gun incldes a bi-pod and a Riton X1 primal scope. If you have any questions or would like more pictures please feel free to call, text, or email! +tax +shipping Local pickup is available 250-753-3355 (call or text) *must have valid PAL to purchase*

categories:Sporting GoodsGuns

34192 impressions

2821 views

Gorgeous GBL Marlin big loop 45 70 Very very low round count (shoots great) Ammo/cheek pad included ONLY reason for sale is its been in the safe for 5 years and not fired once, I use my big loop Winchester for my saddle gun Shipping available, yes you need a PAL

categories:Sporting GoodsGuns

3370 impressions

198 views

Looking to sell my Weatherby Vanguard in .243 Winchester. Comes with the Bushnell Engage 3-9x40 optic. Can also throw in 3 boxes of brass, 18 rounds of loaded ammo and a set of reloading dies as I'll have no use for them. The gun runs great and shoots fantastic out to 400 yards. Only had it out to the range once or twice to run a few boxes of ammo through it. Just don't have a use case for now with some of the other rifle I have in my collection. Asking $850 for it. Valid PAL and matching drivers license required. Cash or E-transfer ONLY. Willing to deliver between Taber and Coalhurst. Will also ship if shipping fees are covered.

categories:Sporting GoodsGuns

2385 impressions

168 views

We buy rifles, shotguns, ammo , Estate sales, are you thinking of selling your collection of firearms BEFORE YOU PASS ? Rifles, double rifles, drillings, combination rifle/shotguns,scopes, binoculars, lazer rangefinders We offer to buy your unwanted, unused rifles , We pay cash for your unused , new in box, lighlty used , new in box... we do this as a hobby and enjoy doing gun shows and meeting gun like people.... We meet in person to see the rifles and have the required license to buy your rifles and shotguns. Ammunition ,binoculars etc. We travel Alberta and Saskatchewan and meet face to face to see what you have , we will buy your rifles or shotguns your crates of ammo at a reasonable price. but don't expect us to pay you full retail on the rifle or shotgun as we will offer you a vendors price.. if interested in selling your firearms to us ... call 306-221-9599 Thank you...

categories:Guns

42392 impressions

4095 views

Up for sale is a set of 22-inch GT Rims 8 x 180 (Fits Chev/GM 2500/3500 2011 & Newer) paired with 35 x 12.5 x 22 Sailun Terramax tires with snowflake, suitable for various vehicles and all seasons. These used tires are in good condition, ready to enhance your ride's performance and look. The front tires are 33” but they are completely wore out. Back tires are 70% tread left. Offset -18. Here are the specifications: Rim Size: 22 inches Tire Size: 35 x 12.5 x 22 Tire Brand: Sailun Tire Model: Terramax These rims and tires are looking for a new home! I'm asking $500, but I'm open to reasonable offers. I've seen similar sets listed on Kijiji for around $1200-$1600, so I believe this is a fair price given the condition and brand. Don't miss out on this fantastic deal. If the ad's still up, the tires are still available, so shoot me a message! They could be spinning on your truck tomorrow! Asking $500 for the 4 Rims and tires OBO or trade for guns, older GM trucks, tools, ect….. Includes chrome spike lug nuts and Xtra long socket. Call or text 4038706835 Show less Range Rd 52, Rocky View County, T4C 2X3 +1-403-870-6835

categories:Auto and TrailersAuto PartsTires and Rims

1725 impressions

85 views

I got a 338 for sale as I don’t use it anymore get gun it’s only been to the range has a little bit of scuff marks on it nothing major looking for 1000 I am not mailing the gun you need to pick up.

categories:Sporting GoodsGuns

6696 impressions

502 views

Stoeger: 12/28” M3500 DRT BRONZE 3.5” Price firm. Gun case included in asking price. For an additional fee: - Weatherby Cable Lock at additional fee ($15 each) **Per Federal guideline for sale of non-restricted firearms (https://www.rcmp-grc.gc.ca/en/firearms/buying-and-selling-transferring-f...): - transferor (seller) must obtain confirmation of the validity of the transferee's (buyer's) firearms licence, prior to the transfer of a non-restricted firearm. - In an effort to expedite the sale please be prepared to provide a photo of your active PAL with licence number, as well as your date of birth and email address to confirm using the RCMP website. See link above for guidelines and sale process.

categories:Sporting GoodsGuns

43274 impressions

1190 views

Hello for sale tipton best gun vice used it once to mount a scope worked great also have coyote decoy and a cellar trail cam the camera was never used just taken out of box to look at ill sell all together for 200$ i will be coming to edmonton sunday morning as well and may consider trade for federal 308 win ammo thanks

categories:Sporting GoodsGuns

789 impressions

75 views

Many survivialists, competition shooters and outdoorsmen fear it... a dead battery in their reflex sight. While some have opted to make compromises and surrender the speed of a reflex sight for the comfort of something less effective, Vector Optics is poised to change all of that will the introduction of the various Solar Augmented sights. They still require a battery but will draw power from ambient light to prolong that battery life. All versions sold by Specter Arms are multi reticle, with minimal weight or bulk while preserving the main reason to get a reflex sight; speed. All of these units can be mounted on a picatinny rail. _____________________ Vector Optics Scrapper (SM45) $80 (sale) This is a closed, tube style optic. It comes with 2 different mount heights, one for modern sporting rifle where the comb of the stock and the mounting plane are on the same level or a low profile mount for traditionally stocked firearms such as lever actions. Caliber Range (max): 20ga, 762x39mm. Ideal For: Shotguns, SKS, FX9, Scorpion, Raven, Templar, wk180, ws-mcr, tavor, APC, Bren _____________________ Vector Optics Frenzy-X $250 This is an open micro reflex sight that is easily mountable to a pistol or a traditionally stocked firearm where the comb is lower than the mounting plane. It can be used with a modern sporting rifle with the addition of a riser. This is strongly recommended as a sight for 45-70 lever actions. Caliber Range (max): 12ga, 45-70. Ideal For: Shotguns, PC9, SKS, lever actions, pistols(RMR or picatinny), M10x, Type 81 _____________________ Specter Arms is a dealer for Vector Optics and there is more on the website. Send a text message to 7809079585 for more information. Shipping available at actual cost or pick up in SE Edmonton. Please click on my user name for other ads or information on shipping policies. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

112629 impressions

2191 views