Best offers or trades considered. Honda XR 200 fuel tank.. cracked bad and leaking. Can be plastic welded and or put in a epoxy liner coating.. comes with petcock and cap and strap. These are rare and hard to find.. and overpriced on eBay.. please text or email only as I live in a bad service area. Do not phone I won't answer.

categories:Auto and TrailersMotorcycles

10542 impressions

626 views

Model AC225S. 230 volt 50 amp input, 225 amp welding current at 25 arc volts. Works well. Comes with 2 packs of 3/32” rods, one 7011, one 7014. Ground lead with clamp is 15 feet long, rod holder lead is 19 1/2 feet long.

categories:Tools and Equipment

592 impressions

37 views

For sale are: scorpion evo3 magazines in 9mm Individual magazines are $40 5 magazines are $175 These will fit in the Scorpion Evo3 These magazines are pinned by rivet (not crimped or welded) to reduce their capacity to 5 rounds (from the original 35) to comply with Canadian law. Shipping available at actual cost or pick up in SE Edmonton. Because of the Canada post strike I would need to ship by the more expensive UPS and UPS not ship to PO boxes. Please click on my user name to learn more about my business, see my other ads, trades or shipping policies. The section of C-21 that requires a PAL to purchase magazines has come into force. I don't need to run your PAL through the government website (like a firearms purchase) but I need to at least see it. This is the last magazine import of this type. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

40268 impressions

791 views

For sale are: Five Magpul AK-47 magazines Individual magazines are $32 These work well in the wk181c and m10x These magazines are pinned by rivet (not crimped or welded) to reduce their capacity to 5 rounds (from the original 30) to comply with Canadian law. Shipping available at actual cost or pick up in SE Edmonton. Please click on my user name to learn more about my business, see my other ads, trades or shipping policies. The section of C-21 that requires a PAL to purchase magazines has come into force. I don't need to run your PAL through the government website (like a firearms purchase) but I need to at least see it. This is the last import of this magazine type WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:Sporting GoodsGuns

13648 impressions

1390 views

Caveat Emptor Spent your money Elsewhere Everyone. Adrenaline Pre-runner off-road Bumper For sale NO Refunds even know NFG. Brand New Adrenaline Bumper from Martin Kines out of Okotoks Alberta. 99-02 Chevrolet or GMC Silverado/Sierra 2500HD Pre-runner Bumper. Mounted several times but has never seen the street. Will require significant modifications as the lower Mounting bracket are in the way and will not allow an actual winch to be mounted on Bracket. The Brackets will need to be cut off and moved to the outside frame rails. Also, ALL the Welds on the brackets must be done as they were just spot Welded during Manufacturing process. $2115

categories:Auto and TrailersTrucks

33308 impressions

2683 views

Giant Loop Rogue Dry Bag The Rogue is an indispensable, easy-to-use roll-top dry bag that’s ideal for a wide variety of adventures. It features 17 liters of packable volume and seamlessly integrates with Giant Loop Saddlebags and Panniers. Openings on both ends mean quick and easy access without having to dig or unstrap from saddlebags, panniers, or remove from a rack. A handy air purge valve allows compact compression of gear and bag when packing. Upon arriving at your destination, two included carry straps convert the bag into a backpack. VOLUME • Max: 17 liters (1,030 cubic inches). • Minimum: 10 liters (610 cubic inches). DIMENSIONS • Flat: 32″ L x 13.5″ W (81 cm L x 34 cm W). • Loaded with gear and ends rolled three times for waterproof seal: 19″ L x 9″ W (48 cm L x 23 cm W). WEIGHT • 1 lb. 15 oz. (0.9 kg), with all included components. MATERIALS • Rugged Bomb Shell™ coated fabric construction with 100% waterproof radio-frequency (RF) welded seams. • Plastic side-release buckles, nylon webbing, and reflective trim. SW-Motech Drybag 350 Waterproof Tail Bag The Drybag 350 can be attached to your motorcycle in just a few simple steps and offers plenty of space for your travel essentials. The zip pocket on the side offers quick access to personal items, and a practical carrying handle makes it easy to transport the bag by hand. Thanks to the elastic PVC material, the bags can be easily rolled and transported compressed on the motorcycle regardless of the luggage load. The drybags are waterproof in the main compartment and are highly UV-resistant. The new arrangement of the straps allows easy combination with other Drybag models on the passenger seat or the rack. Thanks to their simple design, the new Drybags perfectly fit to the waterproof SysBag WP bags and the WP tank bags from the PRO line. Features: • Welded outer pocket • MOLLE adapter for attaching accessory bags • Universal fit for almost all motorcycles • Made of sturdy 500D PVC • Waterproof, extremely durable roll • Waterproof, extremely durable luggage roll • Additional loop straps allow the bags to be pulled closer to the motorcycle • Integrated handle on the side • Waterproof roll closure and taped seams • Reflective details for increased safety on the road

categories:Sporting GoodsCamping and Survival Gear

713 impressions

109 views

In almost brand new condition still. Used only once or twice.. have another one and don’t use this one often. $539 plus tax at KMS and $509 plus tax and shipping on amazon.

categories:Tools and Equipment

442 impressions

64 views

Selling/trading a Carl Gustaf 6.5x55. Overall it's in fair shape. 26" stepped barrel. Steel is in nice shape, bluing has faded to a bit of a lighter patina but is in clean shape. Stock is in rougher shape, looks to have had a repair around the bottom metal, butt stock has a sticky texture to it from what I assume was tape of some kind that would have been on it at some time. Safety wing has been welded on a will need some filing to stay in the safety position properly. Butt plate has some chips out of it. Bore is starting to darken but is in good shootable shape. comes topped with a set of bases. Would make a nice restoration project or use it as a beater. Looking for $375 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3073 impressions

535 views

Coleman 200cc mini bike, hardly used, bought at Princess Auto for $975 3 yrs ago, maybe 20 hrs max, tires still have nubs on, our youngest kid is 16yrs old and 170lbs, bike does not go fast enough for him( it is still governed). Had to weld headlight clamp on as we were on a rough road and it shook loose, chain was rubbing on cover for a while before I caught it, only partially rubbed in it from the inside, is good now.Tires have never went flat.

categories:Auto and TrailersMotorcycles

1578 impressions

198 views

If this ad is up, then item is still available! For Sale: Used utility trailer made from a heavy half ton or 3/4 ton truck box when the DVM allowed such ones to be built from. Single axle with functional tail gate made from a 1975-78 truck box and frame. It has a hitch for a 2” ball, functioning factory lights (4 ways, brake & signal lights) just like it was a functioning truck(no aftermarket lights or brackets to mess with. Tires are ok for now, 15” 5 bolt rims on the trailer with an additional set of rims to go with trailer. I have a brand new jack stand to go with as well but have not been welded it on yet. Hitch secure chains included as well as a brand new trailer plug installed, as the last one corroded from sitting too long. No padlocks or hitch locks included in the sale. Trailer bed has got some surface rust and can be cleaned up with a wire brush or sand blaster and resurfaced with tremclad paint or a rubber coating. Pulls very nicely on the highway or gravel roads. This trailer is useable now, registered, serial numbered and plated by me and can be delivered to you for a small fee within the Southern Alberta area Asking $1800 (sale pending) No trades, reasonable offers maybe considered, low ballers will be ignored. Cash, bank draft, money order, or e-transfer accepted (Emt accepted before pickup of trailer, not on my driveway) Sale of trailer within Canada only

categories:Auto and TrailersUtility Trailers

813 impressions

160 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. These retail for $2/round. Selling for $1.25/round. Can work out a deal if you purchase larger quantities. Loose ammo, no box. Local Calgary sale. No shipping. Engineered to maximize terminal ballistics as defined by the FBI test protocol, Defender centerfire handgun ammunition provides maximum stopping power for the ultimate performance in personal defense. The innovative and proprietary Winchester bonding process welds the jacket to the lead core for improved penetration, 1.5x expansion and the proven performance needed when the stakes are high. The load also includes a notched jacket, which is preprogrammed to expand into six uniform segments for consistent tactical performance.

categories:Sporting GoodsGuns

33220 impressions

980 views

i have a steel welding table with vice that i no longer use. would like 60.00 for it if interested please call 780-489-4604 edmonton.

categories:Tools and Equipment

182 impressions

57 views

Selling/trading a few barrelled actions. These came in with a bulk deal, I do not know the history on them. as follows from top to bottom: 1. Swedish Nitro proofed action, Husqvarna 30-06 barrel. Bluing is in nice shape, shows normal marks and some sort of braze mark on the underside of the barrel. Bore is excellent. Bolt doesn't seem to move forward or back. 3 holes filled on the side of the receiver. Front sight still present and rear base. Bolt is not complete, missing firing pin, safety and cocking mechanism. 2. 1902 Carl Gustaf action, numbers matching barrel assumed to be 6.5x55. Bluing is in nice shape throughout. Front sight present and rear sight base, elevator/ladder is not. Bolt is stuck in place and looks to have a chip out of the rear section. Has a weld on the underside of the action. 3. Swedish Nitro proofed action, Husqvarna 30-06 barrel. Bluing is in nice shape, shows normal marks. Bore is in very nice shape. No bolt. Front sight still present. These will be sold as is with no warranty or guarantees. Looking for $195 shipped each, or $525 shipped for the 3 of them. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3908 impressions

406 views

Selling/trading an Iver Johnson Model 1900 .32 cal double action revolver. It's been welded solid. 2.5" octagon barrel. Steel shows some light wear and tarnishing throughout but is in good shape. Grips are very nice. No PAL required to purchase, just proof of age. Looking for $450 shipped. Insurance by request on buyer. Open to all trades. Can send more picture upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1622 impressions

117 views

Selling/trading an F. Dumoulin and Co. Leige Canadian Bulldog revolver. It's been welded solid. 1.75" barrel. Exterior finish is in nice shape, shows some normal marks and colour loss throughout. Grips show some wear but are in good shape. Complete with lanyard ring. Looking for $495 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

1428 impressions

133 views

Deactivated Type 54s / tokarev Visible external welds at muzzle and rear (flanking hammer) of firearm, Magazine, and slide/frame interface. Left and Right side of firearm untouched shipping all over canada

categories:Sporting GoodsGuns

2724 impressions

821 views

Hello, I am offering general carpentry handyman work, welding services, and odd job work (cleaning gutters, disposal services, etc.) at an hourly rate depending on the service. It starts at $40.00/hour for general fixes involving hand tools. If the work is more extensive, such as redoing baseboards in a home, the cost is $50.00/hour. Trucks fees are applicable when it is used specifically for the work such as a dump run. Pricing is worked out before hand during the quoting and material pricing procedure. My carpentry skills can include rough work like framing, drywall repair, roof patching, plumbing fixes and more. Or finish work like painting, baseboards/casing, exterior siding and cabinet repair. If the work is out of my skill range I can refer you to other contractors. Welding projects and fixes are also offered. Odd job work can be almost anything. Inquire to see if I can help. Usually I charge hourly but depending on the work and your needs it can be quoted as well. All compensation paid is for my time and talent plus material and service costs. I work in honour and am upfront with any issues. All discrepancies I will seek remedy for and expect the same from the client.

categories:Business and Services

4090 impressions

777 views

Brand new MIL-SPEC carbine receiver extension compatible Chrome silicon lock spring Sloping cheek weld Shielded release latch Replaceable 0.30″ rubber buttpad Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments 1.25″ sling loops Lanyard hole for custom para-cord rigs Length: 6.9” Length of pull adjustment range: 3.3” Length of pull – Collapsed: ~10.5 Length of pull – Extended: ~13.8” Weight: 8 oz Made in USA

categories:Sporting GoodsGuns

2156 impressions

467 views

This lightweight 12 foot welded aluminum tree stand has been set up a few times. Selling for my brother, I don't need 2 tree stands. Comes with all hardware/straps etc as well as an umbrella. ***Look at my other ads for other related items***

categories:Sporting Goods

858 impressions

128 views

Brand new Partial Length Picatinny/ACOG rail, 3 inches long and sits at the back part of the dust cover for a rear bias. It is the perfect length for red dot or holographic sights. It weighs 5 ounces/141g. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.

categories:Sporting GoodsGuns

4766 impressions

481 views

If ad is up; it is available Fire resistant green duck welding screen. Two panels hinged in the middle. Each section is 6 ft tall & 7 ft long Price is fair and firm. Pickup & payment in person only

categories:Tools and Equipment

1749 impressions

304 views