Nikon scope with BDC 600 reticle. Hash marks from 100 to 600 yds in 50 yd increments developed for 55gr 22cal bullets at 3,240 fps muzzle velocity. There’s lots of YouTube videos on the scope and reticle. I’ve tried it out to 450 yds and found the hash marks to be bang on. Works really well with Nikon’s “Spot On” smartphone app where you can select this exact scope and fine tune your parameters. Comes with front and rear flip up lens covers, honeycomb sunshade and manuals for scope and reticle.

Caldwell brass catcher with heat resistant mesh, zippered bottom dump and quick attach/detach mount for a Picatinny rail or Weaver base.

This came off of a circa 1980 742 but I believe it is compatible with all the 74xx and 76xx models. Replaces the forend stock screw and uses that for the swivel attachment rather than the barrel band option.

223 case for use with OAL gauge to find bullet seating depth with respect to rifle lands.

Reloading cabinet clean out: RCBS case lube and pad MTM primer flipper/tray and powder funnel

This is a Lortone 3lb drum. It’s just under 4.7” high with a 4” ID and 4 1/2” OD. I’m told it works on the Princess Auto tumblers but have not confirmed that myself. Made of rubber it is much quieter and more durable than plastic drums. Comes complete with metal lid, boot gasket, aluminum compression cap, fender washer and retaining nut. Also included is 1lb of BC Precision Stainless Steel Tumbling Media Pins - 0.047" Diameter, 0.255" Length. I’ve used this for polishing brass cases. It will handle 50 223 or pistol cases in a batch. While it will hold 50 308 cases I get better results if I do 30 at a time.

Nosler 40 gr Ballistic Tip (39510) - Qty: 90 Nosler 55 gr Varmagedon (17240) - Qty: 34 Barnes 55 gr Varmint Grenade (22496) - Qty: 140 Sierra 55 gr HP Boat Tail (1390) - Qty: 85 Sierra 53 gr HP Match (1400) - Qty: 60 $150 for the lot.

I changed my synthetic stock T1x to a vertical pistol grip and extended butt plate. These are the originals. The new parts indicated that they would fit on either the T3 or T1x so these should as well. $40 for the pair.

“Repositions the hand for a comfortable grasp and improved trigger finger location. Hand filling design with thumbrest and palmswell provide enhanced gripping endurance. Matte surface gives good, non-slip purchase. Fits AR-15, AR-10 and AR-25 rifles. Right-hand only.”

Gerber LMF knife 11” overall length with 6” blade. Full 1/4” tang. Beautiful knife. Razor sharp. Never used.

Redding P/N 75114 Like new.