Up for grabs is a like new, mounted never left the house Athlon Ares BTR gen2 2.5-15x50. Full hd glass, illuminated reticle, mil/mil with zero stop. will come mounted in mdt 30mm rings 900.00 plus shipping

categories:GunsSporting Goods

7012 impressions

790 views

1942 round receiver izzy Mosin in great shape. Receiver and bolt numbers match, stock and magazine are force-matched. Stock still has a nice deep color with shellac only coming off on the front handguard. Some scuffs and safe kisses on the butt end of the stock. The bore is extremely good. Very shiny with no apparent pitting or rust anywhere. Solid rifling. Comes complete with a bayonet. Upgraded chassis 3 mags and Vism 6-24x50 Mil Dot scope. Selling to build a 5.56

categories:GunsSporting Goods

19357 impressions

1683 views

Hello everyone. I have for sale a Savage 10 Law Enforcement Edition in .308 that has been my go-to hunting rifle for the last 3 years. It has a cheek riser, directional muzzle break, 24 in heavy fluted barrel, 20 MOA rail, long range scope with heavy duty hand lapped rings, 2 proprietary Savage magazines,an extra rubber butt pad to reduce recoil even more, 3 position safety and tactical bolt knob. The stock is with the bedded aluminum chassis for rigidity and precision. The AccuTrigger is adjusted at 2 lb. This is a very very accurate rifle. Here are some bullets tested with a 3 shot group at 100 yards: Sako powerhead blade 162 gr - 0.4 in Herters soft point 150 gr -0.45 in Federal berger hybrid hunter 168 gr - 0.48 in Sellier & Bellot soft point 180 gr - 0.48 in Norma soft point 150 gr - 0.74 in Sako superhammerhead 180 gr - 0.8 in Did load development for it with Barnes TTSX 130 gr and obtained 0.35 in at 100 yards . The scope is a SKW Optics 5x30x56 FFP in 0.5 MIL/click. The scope is high quality and tracks well. It s a 34 mm tube with lots of internal adjustment. It comes with everything already done and researched. You don t have to do anything.The rifle was $900 ,scope was $700 muzzle break $100 ,butt stock pad $40, scope rings $100,scope rings handlapping $50, extra magazine $100,trigger adjustment $50. The rifle is ready to shoot. Doesn't need anything. About 300 rounds through it. Currently sighted at 300 yards. Sold as a package since the scope rings are hand lapped for this rifle. No lowballers. Gun case not sold with the rifle. Willing to ship at owner's expense about $70. Thanks 

categories:GunsSporting Goods

35247 impressions

1478 views

Optic is brand new and unused, box is not factory sealed Open to offers

categories:GunsSporting Goods

520 impressions

115 views

Brand new The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost. The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.   Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market. Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”.  An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in USA

categories:GunsSporting Goods

2553 impressions

398 views

Brand new Model Number: G43.STS TAN Water Resistant: 33ft Mount: MIL-STD-1913 Rail Fixed Magnification: 3X Eye Relief: 2.5″ (63.5mm) Field of View: 7.5 degrees Sealing: Fog resistant internal optics The G43 Magnifier is a miniaturized version of battle-tested G33 Magnifier, making it one of the most compact and lightweight magnifiers available. The mount provides fast transitioning from 3X to 1X and comes with a 7mm spacer to properly adapt to any HWS model.

categories:GunsSporting Goods

3302 impressions

376 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:GunsSporting Goods

5171 impressions

493 views

Brand new Selected by the U.S. Army for both the Squad Designated Marksman Rifle System and for U.S. Special Forces, the Tango6T is available in the commercial market. Designed for today’s common MSR/AR and bolt action platforms, this scope is the ideal solution for CQB / mid-range tactical engagements, 3 Gun competitions and hunting. The Tango6T is complete with our HDX optical system for extreme clarity and low-light performance, HellFire fiber optic and glass-etched illuminated reticles, and first focal plane designs. HDX optics extra-low dispersion glass (ED) combined with high transmittance glass (HT) provide industry-leading light transmission and optical clarity for any situation Infinite Guarantee: SIG SAUER Electro-Optics are guaranteed forever. It’s an unlimited lifetime guarantee. HDX: Advanced optical systems comprising both High Definition (ED) and High Transmittance (HT) glass for ultra-high resolution, optical performance and light transmission. Hellfire Reticle: Electronically illuminated reticle system utilizes advanced fiberoptic technology to vary the light intensity of the central aiming point from IR (InfraRed) dim to HellFire bright for daylight illumination, resulting in a bright, defined aiming point for precision shot placement in any condition. LensArmor: Abrasion-resistant lens coatings for extreme durability ensure the lenses on your scope will stay sharp, bright, and clear. LenShield: Proprietary Mil-Spec oleophobic coating that sheds water, oil, and gunk to ensure a clean sight image at all times. LockDown Zero System: The LockDown Zero System is a stop-locking turret that allows a rapid return to Zero. After dialing up elevation for a shot at extended range, the LockDown Zero System eliminates worry over how far to turn the elevation dial to return adjustment to zero. Turret not only stops at zero, it locks at zero. Motac: Activated through motion sensing technology, MOTAC immediately powers up illumination when it senses motion and powers down when it does not in order to extend battery life. SpectraCoat: Highly efficient, ultra-wide broadband, anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum providing superior light transmission. Stealth ID: Electro-Optics industrial design inspired by our legendary firearms; deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering to add function to the form of all SIG SAUER electro-optics. HDX optics extra-low dispersion glass (ED) combined with high transmittance glass (HT) provide industry-leading light transmission and optical clarity for any situation 6x Super-Zoom Advanced Optical System Fast Focus Eyepiece Night Vision (NV) Illuminated reticle settings with locking illumination dial Laser engraved mounting line to align riflescope to scope rings Dependable waterproof (IPX-8 rated for complete and continuous immersion at 20 meters ) and fog-proof performance Power selector ring throw lever included with all models Covered by SIG SAUERs INFINITE Guarantee and Electronics Limited Warranty, see website for full details. Assembled in SIG SAUER optics factory

categories:GunsSporting Goods

19556 impressions

1826 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

13419 impressions

1174 views

Brand new Model Number: EXPS3-1 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1 Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings. 10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EOTECH EXPS3-1 Holographic Sight with a 1 MOA Dot, side button operation, and quick-detach (QD) STS mount is a cutting-edge aiming solution for tactical scenarios and sport shooting. Precision-engineered to assist shooters in acquiring targets swiftly and accurately, this sight is forged for reliability and peak performance under challenging conditions. Its compact design minimizes rail space, allowing for the addition of magnifiers and backup iron sights. Renowned for its robust construction, the EXPS3-1 Holographic Sight is night vision-compatible, offering clear aiming in various lighting situations, which is critical for both professional operators and dedicated hunters. The single dot reticle is calibrated for rapid aiming and offers the simplicity of a red dot sight. The sight’s elevation can be effortlessly adjusted with side-mounted buttons, providing users with an uninterrupted and clutter-free field of vision. The EXPS3-1 comes with a 7mm raised base. This ergonomic elevation allows for the use of iron sights as a backup, ensuring you’re never left without a targeting solution. A user-friendly adjustable locking QD lever ensures easy attachment and removal while maintaining stability and zero retention. Whether for duty or sport, the EXPS3-1 Holographic Sight is designed to exceed the rigorous demands of those seeking precision and speed.

categories:GunsSporting Goods

4668 impressions

374 views

Brand new 5-20x50mm 30mm Tube Second Focal Plane Trijicon produces battle-proven aiming systems that deliver rapid target acquisition and increased hit potential under any lighting conditions. Their self-luminous aiming systems empower you to execute any shot with complete confidence in bright light, low light or no light at all. With a stunning magnification range, a 30mm tube, and an impressive objective, the AccuPoint 5-20x50 looks mighty serious while delivering the power needed to get on target across long distances. This fine optic is also graced with a very handy third turret that re-focuses the reticle to eliminate parallax error. Sighting during twilight conditions is enhanced considerably by the remarkable 50mm objective, while the dual tritium/fiber optic reticle illumination system provides a vibrant aiming point under any conditions. A mounting base and rings are used to attach a riflescope to a firearm. A comfortable sight picture is contingent upon the height of the rings. A comfortable cheek-weld is the result of properly positioning the scope over the receiver. Mounting the scope close to the receiver is preferable, yet scopes with larger objectives need higher rings so the front bell can clear the barrel. It should be noted that in many mounting applications, a professional gunsmith's skills will be needed for proper installation. 30mm Main-Tube 6061-T6 Aluminum main-tube is waterproof to 10' Mil-Spec Finish Type III hard anodized per MIL-A-8625 , Class 2 dull & non reflective Multi-Layer Coated Lenses Provide superior clarity, zero distortion, flare/glare reduction Side-Focus Parallax Correction Third turret on saddle actuates parallax correction for long-range accuracy Fiber Optics and Tritium Illumination Proprietary battery-free technology provides a vivid aiming point without the need for failure-prone batteries Dual-Illuminated Standard Crosshair w/Green Dot Reticle A series of dots upon the cross hairs gives the shooter the ability to judge bullet drop and the proper hold over for accurate long range shot placement. Trijicon's proprietary tritium/fiber-optic illumination technology places a brilliant green dot at the intersection of the stadia. This scope has the reticle positioned in the rear or second focal plane so it will not magnify when the scope is zoomed to high power. This leaves the sight picture unobstructed for a clear view at all times. Reticle: Standard Crosshair w/Green Dot Main-Tube Diameter: 30mm Linear Field of View: 5x: 19.1' @ 100 yd / 6.3 m @ 100 m 20x: 5.1' @ 100 yd / 1.7 m @ 100 mExit Pupil Diameter5x: 10mm 20x: 2.5mmEye Relief5x: 3.8" / 96.5mm 20x: 4.1" / 104 mm Impact Point Correction: 1/4 MOA Maximum Windage/Elevation Adjustment Windage: 34 MOA Elevation: 34 MOA Weatherproofing: Waterproof to 10.0' Length: 13.6"/345mm w/o sunshade Weight: 29.4 oz / 0.83 kg w/ sunshade Coming with: Weatherproof Logo Sticker 3.0" Sunshade Pair of Lens Caps Limited Lifetime Warranty (15 Year Warranty on Tritium)

categories:GunsSporting Goods

7050 impressions

465 views

Brand new 3-9x40mm 1 inch Tube Second Focal Plane Length x Width x Height: 12.3 in x 2.5 in x 2.2 in Weight: 17.02 oz. (482.51g) Reticle Pattern: MIL-Square Crosshair Day Reticle Color: Green Illumination Source: LED Illumination Settings: 11 Power Source: 1 CR2032 Battery Life: 198 hours Adjustment: 0.1 MIL per click Adjustment Range: 12 MIL Total Travel Eye Relief: 3.5 in. - 3.7 in. (88.9mm - 93.98mm) Exit Pupil: 0.52 in. - 0.17 in. (13.21mm - 4.32mm) Field of View (degrees): 6.75° - 2.25° Field of View (feet): 35.5 ft. - 11.8 ft. @ 100 yds. (11.83 - 3.93m @ 100m) Housing Material: 6061 Aircraft Grade Aluminum Finish: Matte Black Coming with: Bikini Caps Scopecoat™ 1 CR2032 Battery Quick Reference Guide Warranty Card Vinyl Logo Sticker

categories:GunsSporting Goods

4201 impressions

496 views

3 available. Brand new in box. Never mounted, never taken out of the box. Recently imported some for myself, friends and family. These are surplus, so putting them up for sale. $1,250 each including shipping. These have a top tier reputation for zero retention, dialing and return to zero. They’re not available in Canada and are now out of stock at SWFA in the US again.

categories:GunsSporting Goods

156 impressions

88 views

Brand new Model Number: EXPS3-2 The “E” is for “Extreme.” The EXPS3 offers true 2-eyes-open shooting and a 7 mm raised base that still allows for iron sight access. It features easy-to-adjust side buttons and an adjustable, locking, quick-detach lever for easy attachment and removal. It is also the optic of choice for the technologically advanced modern rifle hunter. Its night vision-compatibility makes it a versatile choice for day or night hunting. Night vision: Compatible Length/Width/Height: 3.8” x 2.3” x 2.9” (96.5 x 58.4 x 73.7 mm) Weight: 11.2 oz (317.5 g) Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1” Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings,10 additional settings for Gen I through III+ night vision devices Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp.

categories:GunsSporting Goods

3364 impressions

400 views

Brand new Model Number: EXPS3-4 Water Resistant: Submersible to 33 ft. (10 m) depth Mount: 1” Weaver or MIL-STD-1913 rail Brightness: 20 daylight settings,10 additional settings for Gen I through III+ night vision devices Power Source: 1 x 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The “E” is for “Extreme.” The EXPS3 offers true 2-eyes-open shooting and a 7 mm raised base that still allows for iron sight access. It features easy-to-adjust side buttons and an adjustable, locking, quick-detach lever for easy attachment and removal. It is also the optic of choice for the technologically advanced modern rifle hunter. Its night vision-compatibility makes it a versatile choice for day or night hunting.

categories:GunsSporting Goods

3714 impressions

423 views

Brand new Model Number: EXPS2-0GRN Night Vision-Compatibility: None Water Resistant: Submersible to 10ft. (3m) Mount: Quick-detach lever fits both 1 Weaver and MIL-STD-1913 rail Power Source: One 123 lithium battery Battery Life: 600 continuous hours at nominal setting 12 at room temp. The EXPS2 offers true 2-eyes-open shooting and provides an unparalleled targeting experience. The all-purpose EXPS2 features easy-to-adjust side buttons and a quick-detach lever. It has a transversely-mounted lithium 123 battery. The increased height of the EXPS provides iron sight co-witness access in the lower third of the viewing window. Whether you’re using the sight for law enforcement or hunting, the EXPS series sights are the premier optics in the line.

categories:GunsSporting Goods

3333 impressions

402 views

10% discount until January 1st when prices expect to jump! Locally in Fort McMurray! Store your Firearms for years without worry. This is the product used since WW2 to preserve metal in extreme conditions! Spray on cans or brush on and put them away until ready to enjoy. 1 can of spray or jar will protect a lot of gear, and thats cheap ease of mind. Cosmoline RP-342 "HEAVY" Military-Grade Rust Preventive Spray 12 oz cans $27.50. Good for those hard to reach places! 6 OZ jar, Paint on with a brush for a nice coat! -SPEC Grease (MIL-C-11796C, Class 3) is a medium grade grease/corrosion preventative compound that can prevent rust and corrosion for years, even in the harshest of environments. Commonly used to protect/preserve equipment, machinery, firearms, and any other metal surface when put in storage. This heavy-duty MIL-SPEC Cosmoline grease is the same used back in WWII....and is still widely used today by the U.S. Armed Forces. $18.50 for a 6 oz glass jar. Local, in Fort McMurray

categories:GunsSporting Goods

17078 impressions

1830 views

Brand new MIL-SPEC carbine receiver extension compatible Chrome silicon lock spring Sloping cheek weld Shielded release latch Replaceable 0.30″ rubber buttpad Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments 1.25″ sling loops Lanyard hole for custom para-cord rigs Length: 6.9” Length of pull adjustment range: 3.3” Length of pull – Collapsed: ~10.5 Length of pull – Extended: ~13.8” Weight: 8 oz Made in USA

categories:GunsSporting Goods

2290 impressions

504 views

Selling my new weatherby talon vanguard 6.5 prc. There's been 13 rounds fired only to sight in the scope so basically brand new still. Jas the peek 44 carbon stock lightest one there is. 1) Comes with a nightforce 4x14x50 SHV F1 MIL ILLUMINATED RETICLE SCOPE. 2) New hard case 3) 67 127 barnes vortex bulletts 3full boxes &7 4) 60 142 accubond long range reloaded 5) 1.5 lbs n568 powder 6) around 70 127 & 142 bulletts 7) new dies set 8) new strap 9) 45 empty cases fired once. Paid over 5800 for everything asking $3900 obo 780 268 9898

categories:GunsSporting Goods

8498 impressions

414 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 30 mm/1.18” Clearance: 8 mm/.314" (from the bottom of the tube to bridge of the mount body) Length: 108 mm/4.25” Weight: 145 g/5.1 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9902 impressions

411 views

Brand new New Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts. The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock position. The SCP-series of mounts can also be rotated for left or right handed shooters, and feature two separate side clamps. 0 MIL/0 MOA Height: 34 mm/1.35” Length: 108 mm/4.25” Weight: 154 g/5.4 oz 10-degree wedge included Note: Will not fit the SAKO S20 or rifles with 2-piece rails

categories:GunsSporting Goods

9391 impressions

334 views