Brand new Non-restricted Caliber: .22LR Twist Rate:  1:16 in Magazine Capacity:  5 Magazine Type:  Detachable Stock: Turkish Walnut with Decorative Tip Thread:  1/2×20 UNF Sights: No Sights, Integral 11mm Dovetail Trigger: Adjustable Barrel Length:  20 in Full Length: 32 in Weight:  6.17lbs Trigger Mech:  Adjustable Safety:  Two-Position, Push-To-Fire Coming with: 1 magazine Made in CZ

categories:GunsSporting Goods

8768 impressions

563 views

Brand new Includes One Magazine, Speed loader and carry case Fits Glock 20/21 GEN 4 Features Adjustable Sights The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation. Last Round Lock Open The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol. Internal Firing Pin Safety Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm. Finish All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel. 10 Second Installation Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot. This procedure can be accomplished in less than 10 seconds with some practice. One Year Factory Direct Warranty Warranty covers any defects in materials or workmanship. (Excluding S&H Charges). Note: Do not use Stinger or any other hyper velocity ammo Do not use Remington Thunderbolts Made in USA

categories:Guns

13413 impressions

1174 views

Brand new Designed to perform in the frigid north, our polymer is a new to market material that is specially formulated for cold weather impact resistance. Its unique properties allow virtually no change in mechanical properties from 73f/20c to -22f/-30c, whereas most polymer materials used for magazines have between .125-.25 the strength at -22f/-30c compared to room temperature. This gives us on average 3-8x better impact resistance than competitive materials at -22f/-30c. Manufacturer: Cross Industries Model: CM10-AR15P-55645-BLKC No additional tools required to reconfigure Integrated angle makes it possible to have the 2 major configurations, curved and straight Bi-directional floorplates allow another 2 possible configurations

categories:Guns

21517 impressions

2183 views

Brand new Caliber: .22lr Capacity: 25 rds Material: Polymer Fits: CZ 512/455/457

categories:Guns

12482 impressions

1009 views

Brand new Non-restricted Action: Bolt Caliber: 308 WIN Magazine Capacity: 5 Hand: Right Barrel Colour: Cerakote Grey H-237Q Barrel Material: Carbon Steel Barrel Length (in)/(cm): 18 / 45.720 Rate of Twist (in): 1 in 10 Receiver Colour: Cerakote Grey H237Q Receiver Material: Carbon Steel Stock Colour: Matte Black Stock Material: Synthetic Stock Type: Magpul Length of Pull (in)/(cm): 13-15 / 33.020 Overall Length (in)/(cm): 38.5 / 97.790 Weight (lb)/(kg): 8.9 / 4.04 Made in USA

categories:GunsSporting Goods

5857 impressions

489 views

Rifle Howa Super Lite in 6.5 Creedmoor (was $1699) -approx 140 rounds through barrel -20" barrel, 1:8 twist -rifle is ONLY 4lb 7oz, with rings and scope 6lb! and 38-3/4" OAL -makes a great little bush gun -aftermarket Backfire recoil pad (was $110) -aftermarket picatinny adapter for use with bipod while still using sling -detachable 3 round magazine Optic Burris Fullfield IV 3-12x42mm (was $450) -illuminated C4 Wind MOA reticle -fixed parallax -capped turrets -1" talley rings (was $85) -stock picatinny rail to go along with

categories:GunsSporting Goods

1992 impressions

325 views

Brand new The UpLULA® loader is a military-grade, pocket-size, universal pistol magazine loader and unloader designed to load and unload virtually all* 9mm Luger up to . 45ACP single and double stack magazines of all manufacturers. It also loads most . 380ACP single and double-stack mags, and 1911’s mags.

categories:GunsSporting Goods

4578 impressions

342 views

Brand new Factory Glock® magazine Fits: Glock 44 Capacity: 10 Rounds Caliber: .22 LR

categories:Guns

13355 impressions

1041 views

Brand new Manufacturer: MEC-GAR Match Grade w/ Competition Plastic Removable Buttplate Fits: 1911 Caliber: .45 ACP Capacity: 8 Rounds Material: Steel and Polymer  Made in Italy

categories:GunsSporting Goods

7516 impressions

741 views

6.5 creedmore MDT Chassis and MDT muzzle break 2 magazines 4K Numeric scope 5x20 with night vision plus 1500 meters range finder and ballistic calculator. Scope calcul windage and drop automatically and range finder send automatically infos to the scope. I sell it for $4500 OR trade for a good fishing/skiing boat. Text anytime 403 318 7081 .

categories:GunsSporting Goods

3423 impressions

585 views

I need help identifying the rifle in the listed pictures. I bought it at the RD gun show, missing the magazine, and would like to find out exactly what the rifle is so i can get the magazine. To summarize, need help identifying rifle and need a magazine. Will pick up within reasonable distance or will pay shipping. Here are some of the marking on the gun to help identify it: 8134, which i think is the SN. Patent 19.145/90

categories:GunsSporting Goods

5422 impressions

440 views

Make: Winchester, Model: 1886, YoM: 1904, Caliber: .45-70 Government Action Type: Lever Action with Half-Length Tubular Magazine, Barrel Length: 22", Octagon Overall, the stock and barrel are in Good-plus condition. Type of Finish: Blued, Finish Originality: Original. Qty: 1 (Shipping available at buyers expense)

categories:GunsSporting Goods

7897 impressions

1010 views

Looking for a stainless steel Winchester Model 70 Classic (CRF) rifle. I would prefer one with a detachable box magazine (DBM). Please message me at 780-913-6454 if you have one.

categories:GunsSporting Goods

20720 impressions

2089 views

Brand new This Magazine Well Insert Assembly is designed to work exclusively with the Ruger PC Carbine. It accepts all Glock 9mm magazines. The flush-fit design is made from rugged, glass-filled polymer material for strength and durability. Quick and easy installation; instructions included with product. The 5/32″ hex wrench included with PC Carbine is required for installation.

categories:Guns

6091 impressions

389 views