Selling my VX-5HD 3-15X44 CDS-ZL2 SIDE FOCUS WIND-PLEX $1750 obo

categories:Sporting GoodsGuns

2440 impressions

219 views

Made in Germany. Up for grabs is this beautiful underlever side by side 12 gauge. Engravings are deep relief game scenes done by hand. Trigger gaurd and underlever made by bone. Locks up tight and works perfectly. Barrels are 29" long. Bluing is good. No cracks in the wood. Located in edmonton. Can ship. Sweet deal for whoever wants to shine her up and use it for an occasional pheasant hunt. Will look at local trades.

categories:Sporting GoodsGuns

6478 impressions

344 views

12 ga. double barrel side by side shotgun. Made by G [George] Bate a famous English gunmaker from Birmingham England. double triggers. double exposed hammers. 2.5 inch chambers. all the metal parts of the firearm are covered with delicate intricate engraving. the barrels appear to be Damascus steel. There is no serial number from the manufacturer. There is a serial number sticker from the Canadian Firearms Registry on the side of the receiver from when the firearm was registered under the now defunct long gun registry. all old firearms records for this gunmaker were destroyed in the 1940's when the factory was bombed in WWII. The gun was made between the 1890's and the 1920's. G Bate Maker, changed its name to G Bate Ltd in the 1920's. in the 1990's the name was changed to Bate & Cross [Gunmaker] Ltd. it has been well cared for. there is no rust and no pitting. the wooden stock has some scratches and dents but is not cracked. it has not been fire for many decades.

categories:Sporting GoodsGuns

5738 impressions

548 views

NEW LEUPOLD VX-6HD 3-18X50 CDS-ZL2 SIDE FOCUS ILLUM. FIREDOT DUPLEX $2800 or will trade for silver

categories:Sporting GoodsGuns

6558 impressions

649 views

Side by Side 12g Husqvarna Model 20B Back action hammer gun was made In Sweden. Good conditio Text please 587-778-59-89

categories:Sporting GoodsGuns

6423 impressions

846 views

Side rail mount for a type 81. Picatinny. Like new. Never used. Can deliver to Lethbridge and area. Email for photo.

categories:Sporting GoodsGuns

5036 impressions

304 views

Mossberg side by side 410 Caliber- VERY RARE

categories:Sporting GoodsGuns

10882 impressions

1185 views

Carrier is as new and unused. Has built in trama pads and mesh liner. Side plates are British army issue surplus. Curved and in excellent condition. Includes all accessories shown. Front/rear AR500 grade plates: • Size 10"x12" • Flat Shaped, Shooters Cut • Rubber Sprayed Anti-spall Coating, One side. Flat Black Paint Reverse side. • 24LBS Total Weight For Both plates Tested to stock 5.56 & 7.62x51mm Green Tip Ammunition Will ship. Located in Grande Prairie in a smoke free home. Check my reviews. Thanks for looking.

categories:Sporting GoodsGuns

2445 impressions

456 views

Wanted over under 12 gauge shotguns, Beretta, Browning. And side x side 12 gauge shotguns Beretta, Browning,Winchester or Remington ( No Turkish guns please ) Cheaper for cash. Must be in good working order. I’m located in NW Edmonton. And available 7 days a week. Please send pictures and your asking price to 780-803-7501

categories:Sporting GoodsGuns

8407 impressions

669 views

Unfired, BNIB Henry chambered in the hard-hitting .45-70 Government. This is the premium side-gate model featuring a polished hardened brass receiver, American walnut stock, and classic tube + side loading. Comes with original box and factory paperwork. PAL required and being validated. No trades please. Prefer a FTF deal in Edmonton but can ship at buyers cost.

categories:Sporting GoodsGuns

21288 impressions

2048 views

Unfired, BNIB Henry Big Boy Steel Side Gate in 357 Mag /38 Special (H012GM), featuring a 20"-barrel, side gate, and a 10-round capacity. Price is firm, not interested in trades and PAL verification is essential. Prefer local deals in Edmonton but will ship at the buyer's expense.

categories:Sporting GoodsGuns

6500 impressions

922 views

Brand new Pair of pins that replace receiver pins in order to attach side mounts on Type 81. Grade 8.8 strength steel. Made in USA

categories:Sporting GoodsGuns

2823 impressions

385 views

Prices A - Single Sided Kit - $20 B - Double Sided Kit - $30 **$5 off each additional kit for any order combo (2 or more) **Ex. A+B=$50-($5 discount)=$45 Total **3x A=3*$20=$60-2*($5 discount)=$50 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) ___________________________________ Single Sided Specs/Instructions Specifications Black Anodized Stainless Steel Weight: 0.2oz (6g) Length: 0.571" (14.5mm) Equivalent to Magpul Type 1 Sling Mount Kit Kit comes with the following 1x Stainless QD Insert 1x Stainless Washer 1x Stainless Nut 3x Stainless Screws (1/2", 3/4", and 1") What you will need 1/8" Allen Key Wrench 5/16" Socket Screwdriver/Wrench Blue Loctite (Optional) Instructions 1. Insert QD Insert into stock on the desired side 2. Insert one of the 3 screws through the hole on the QD Insert 3. Insert a washer on the opposite side 4. Apply a drop of Loctite on the threads of the nut (optional) 5. Using the Allen Key Wrench and 5/16" Socket fasten the nut on the screw 6. Fasten the assembly until snug using the Allen Wrench ___________________________________ Double Sided Specs/Instructions Specifications - Black Anodized Stainless Steel - Weight: 0.4oz (12g) - Length: 0.571" (14.5mm) *each insert* - Equivalent to Magpul Type 1/Type 2 Sling Mount Kit Kit comes with the following - 2x Stainless QD Insert - 4x Stainless Washer - 3x Stainless Screws (1/2", 3/4", and 1") What you will need - 1/8" Allen Key Wrench - Blue Loctite (Optional) Instructions 1. Insert QD Inserts into stock on both sides of the stock 2. Insert one of the 3 screws through the hole of the unthreaded QD Insert 3. Using the Allen Key Wrench thread the screw and temporally fasten the assembly together 4. Function check using the QD Sling Mount on both sides 5. If the bottom of the screw is protruding too far out, remove the QD Inserts and shim off the QD Inserts with the provided Washers 6. Once the correct Screw and Washer Shims (Optional) is determined, the assembly can be fastened together 7. Apply a drop of Loctite on the threads of the Screw (optional) 8. Fasten the assembly until snug using the Allen Wrench 9. *If the Threaded Insert is spinning on it's own, the Insert can be retained via Retaining Hole with a smaller Allen Wrench (See Last Image)

categories:Sporting GoodsGuns

10214 impressions

1102 views

Brand new No-drill, Picatinny Side Mount for Type 81, manufactured by AK MasterMount USA. The mount was custom engineered and manufactured specifically for the Type 81 rifle and was extensively tested to ensure reliability, durability and zero-holding properties. The side mount installation is completely reversible and does not involve any drilling or permanent alterations to the rifle. Fits all Type 81 versions. This “NO-MOD” steel optic mounting side rail is the perfect accessory for the Type 81 in order to mount optics and accessories. It attaches to the hammer and trigger axis pin holes by the use of threaded axis pins, standard on Type 81 SR and optional as an Optics Ready "OR" model Type 81 SE. Threaded pins are optionally available for rifles without built-in receiver pins. No drilling, tapping, riveting, or gunsmithing needed. This steel side rail is low profile, rock-solid, and parallel to the barrel. The side rail dimensionally is the standard AK pattern, however was specifically designed for the AK MasterMount Optics Mounts for ideal positioning, cheek weld and ergonomics. Made from 1018 steel. The pins are custom manufactured in the USA of Grade 8.8 strength steel.

categories:Sporting GoodsGuns

10896 impressions

1114 views

Brand new Non-restricted Lever Action Caliber: 357 MAG/.38 Special Capacity: 10+1 Barrel Length: 20″ Safety: Manual Safety OAL: 37.5″ Weight: 7 lbs Stock: American Walnut, Checkered Straight Grip Receiver: Blue, Drilled & Tapped Sights: Ft:Beaded Rr:Adjustable Semi-Buckhorn w/ Diamond Made in USA

categories:Sporting GoodsGuns

2668 impressions

144 views

SUHL 16 Gauge Double Barrel Made in Germany in 1960s. 2 3/4" chamber 27.5" barrel Left barrel is full choke, right barrel is modified (half) choke. Good bores. Nice overall condition.

categories:Sporting GoodsGuns

2854 impressions

116 views

Zastava 16 Gauge Double Barrel Made in Yugoslavia in 1970s. 2 3/4" chamber 27.5" barrel Left barrel is full choke, right barrel is modified (half) choke. Excellent chrome-vanadium lined bores.

categories:Sporting GoodsGuns

2686 impressions

124 views

3/4 " RINGS, THIS COMBINATION FITS PRE 83 MODEL 94 WINCHESTER TOP EJECT RIFLES WITH NO DRILLING I DON'T HAVE THE MOUNTING SCREWS VERY GOOD CONDITION

categories:Sporting GoodsGuns

4225 impressions

171 views

Brand new Non-restricted Caliber: 45-70 Government Capacity: 4 Rounds Action: Lever Action Safety: Transfer Bar Receiver Finish: Industrial Hard Chrome Satin Barrel: 18.5" Round Hard Chrome Plated Steel Front Sight: Brass Bead Rear Sight: Full Length Picatinny Rail with Rear Peep Sight Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: Stained Hardwood Buttplate: Black Ventilated Rubber Recoil Pad Length of Pull: 14" Rate of Twist: 1:20 Overall Length: 37.5" Weight: 7.08 lbs. Made in USA

categories:Sporting GoodsGuns

3788 impressions

227 views

Brand new Non-restricted Caliber: 30-30 Winchester Capacity: 5+1 Action: Lever Action Safety: Transfer Bar Finish: Blued w/ hardened brass receiver Barrel: 20" Round Blued Steel Front Sight: Ramp w/ .062" Ivory Bead Rear Sight: Fully Adj. Semi-Buckhorn w/ Diamond Insert Scope ability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Walnut Buttplate: Brass Length of Pull: 14" Rate of Twist: 1:12 Overall Length: 38.3" Weight: 7.5 lbs. Made in USA

categories:Sporting GoodsGuns

8080 impressions

429 views

or Sale: Dominion Arms Double Barrel 12 Gauge Shotgun – $350 Selling my Dominion Arms side-by-side 12 gauge shotgun. • Double barrel, break-action • Classic wood stock and fore-end • Clean and well-kept • Smooth action, functions as it should • Great for hunting, sport shooting, or as a reliable bush gun Price: $350 (firm) Located in edmonton area. Buyer must have valid PAL. 📸 See pictures for details.

categories:Sporting GoodsGuns

10479 impressions

1544 views