WW1 French M1886 bayonet for the Lebel rifle. This is the war time simplified version without the quillion (hook) and with the brass handle. This version with the brass handle is of a type produced during the First World War, from the 25th of October 1914 until July of 1917.   The left side of the blade has the initials SG stamped just in front of the guard to identify the Maker.  The "S.G." mark on a French bayonet from the World War I era stands for Sutterlin Lippmann & Cie., a manufacturer located in Saint Étienne. The base of the guard has a stylized letter P with the number 45979 stamped into it. The scabbard has this matching serial number. The base of the grip has the number 11 stamped into it. The release button works as designed.   Overall Length – with blade in scabbard  - 25 3/4” Length of Bayonet – 25 1/8” Length of Grip including the Guard – 4 5/8” Blade Length – 20 1/4”   $200.00   Thanks, Phil

categories:Sporting GoodsGuns

7342 impressions

265 views

French Chassepot Model 1866 Yataghan Sword Bayonet This Yataghan Sword Bayonet and Scabbard have matching Serial #’s (M 8093) Manufactured at the French State Arms Plant of St. Etienne in August 1871 The base of the blade on the left side has the number 1 immediately above the guard. The base of the blade on the right side has a B in a circle and an M with a crown above it in a circle immediately above the guard The guard also has 3 marks on the left side in the curve of the guard a star over the letter V, the letter B in a circle and a T under what could be a star   Overall Length – with blade in scabbard  - 27 7/8” Length of Bayonet – 27 3/8” Length of Grip including the Guard – 4 3/4” Blade Length – 22 5/8”   $200.00   Thanks, Phil

categories:Sporting GoodsGuns

8697 impressions

298 views

French Model 1874 T Back Sword Bayonet for use on the 11mm M1874 Gras rifle Manufactured at the French State Arms Plant of Tulle in August 1878 The Gras was the last of the French sword type bayonets and was manufactured from 1874 until about 1885. The Bayonet and Scabbard have matching Serial numbers 96363 The left side of the guard is engraved with what looks like half a written L and the numbers 96363.  The scabbard has the same mark and numbers on the left side. Above the number on the guard are 2 diamonds each with the letter B in them. The front of the guard just above the top of the blade has the letters L and P The pommel has the number 2 stamped inside at the base along with other stamps I have not identified. The top of the tang has what looks like a C6 stamped in it. The back of the blade is engraved with M d’Armes de Tulle Aout 1878   The Spring Lock works as designed.   Overall Length – with blade in scabbard  - 25 7/8” Length of Bayonet – 25 3/8” The blade has never been sharpened. Length of Grip including the Guard – 4 3/4” Blade Length – 20 3/8”   $200.00   Thanks, Phil

categories:Sporting GoodsGuns

8587 impressions

328 views

If you are looking for a reliable, sturdy, and protective holster for your collectible handguns, I can help. Don't go out into the bush or backcountry without a way to protect and safeguard your valuables! I have hand-made and custom fit holsters that work the following models, and more. Webley Mk 1-6, Webley WG, Smith & Wesson no. 3 variants, French MAS 1873 and 1874 models, Reichsrevolvers, Colt 1877 Thunderer, Colt 1878, Small and large frame Nagant types, Bodeo, Remington and Colt Cap & Ball Revolvers. Inquire with your model information and I'll do my best to match you with something that fits to your liking or money back after return. Prices range from $75-$150 I also have scarce period accurate Japanese Service Type 26 Shaped Top "Ham holsters" with removable shoulder strap and 12 round ammo pouch Designed for Japanese Type 26 revolver in 9mm/.38 cal And German Service Reichsrevolver M/1883 Holsters with 12 round ammo pouch designed for Reichsrevolver Model 1883 10.55 mm/.44 Russian Ships Canada wide. I don't like drama, and offer a money back guarantee of satisfaction.

categories:Sporting GoodsGuns

21470 impressions

827 views

German one missing peices French one all most perfect 250 for both

categories:Sporting GoodsGuns

1855 impressions

302 views

In like new condition French tickler Chinese Sks.

categories:Sporting GoodsGuns

3228 impressions

469 views

Never been issued Looks like brand new Numbers matching Made by Factory 26 Non restricted Semi auto Caliber: 7.62x39 Spike bayonet Coming with : 1 set of cleaning tools 1 ammo clip 1 oil bottle The picture is a sample

categories:Sporting GoodsGuns

143 impressions

24 views

This bolt action single shot shotgun was made in the 1870's and probably converted to a shotgun in Belgium in the 1890's. the gun is in working condition, has a crack that has been repaired by pins shown in pictures. also has some scratches shown in pictures. open to trades Located by evansburg, but make frequent trips to spruce grove.

categories:Sporting GoodsGuns

87732 impressions

5844 views

Selling gun and scope together. Gun has been glass bedded by a professional gun Smith. There are some dents and scratches in this beautiful gun but shouldn't take much to repair. Estimated round count 150 Text or message for more information or pictures

categories:Sporting GoodsGuns

16384 impressions

1224 views

Brand New Non-Restricted Action: Semi Auto/ Pump Caliber: 12GA Capacity: 5 Barrel Length: 20" Ghost Ring Iron Sights Dual-Mode Capability Inertia-Driven Operating System Rough texture touchpoints Lifetime Warranty Coming with: Manual and choke tube kit. By using the receiver of an existing non-restricted shotgun we have been able to add M3 style components to achieve the same look, feel and function of the legendary M3 Super 90, but without the prohibited classification. The TAC-12 “M3 Super 90” is a dual-mode semi-automatic and pump action 12GA shotgun. It can be quickly converted from autoloading to pump by simply turning a spring loaded ring located on the end of the forearm. The M3 was developed in the 1980’s for special operations and elite law enforcement units who required a shotgun that could adapt to various tactical roles. It’s dual-mode system allows for effective operation of both standard and special purpose ammunition, (i.e. rubber, tear, flare, etc.) on the fly. The M3 was designed to operate under the most adverse conditions and boasts easy handling, accuracy and a high rate of fire. Notable adopters include the Canadian JTF2, Czech 601st Special Forces Group and French GIGN. The TAC-12 “M3 Super 90” features a 20” barrel threaded for interchangeable chokes. It has a 3” chamber and is fed by a 5-shot tubular magazine (6 shots, 2.75”). The extended magazine tube features a barrel clamp for additional durability. There is a magazine cut-off/chamber-dump button so the shooter can directly chamber a special round without having to cycle through the entire magazine. Fixed on top of the receiver are 3-dot ghost-ring sights for fast target acquisition, and tapped holes for the addition of an optional top picatinny rail. The stock is fixed polymer with non-slip grip checkering, with a rubber buttpad and a sling loop located on both sides. The pump handle is ergonomically shaped with non-slip channels for use with gloves or in wet environments. As the original, it is operated by the proven inertia system. This system delivers unmatched reliability, cleaner operation, and lightning-fast cycling in a lightweight, ultra-durable design. With fewer moving parts and minimal maintenance, it handles the toughest conditions with ease.

categories:Sporting GoodsGuns

4858 impressions

253 views

Selling as i have less time to shoot rifles and this one deserves to go to someone who will shoot it. I know there is varying reviews on these conversions. My understanding is most (possibly all) were done by century arms and some cycled and some did not. Do your own research please. This one has cycled 125rds of the lake city ammo for me and I don't recall any failures. Both mags did work. Can't guarantee any other ammo as I only tried the one. At the time I acquired this rifle the original scopes were either unavailable or very expensive. I found the vomz played the part. The front is attached with an original ring and a bushing. The back I had to make a scope ring to clamp the back in place. It's machined aluminum painted black. There is just enough room to slide the scope on and off its rail without having to remove the scope from the mount. Included Rifle Original sling and buttpad (cracked) Scope mount with rings Two magazines 4 stripper clips (for 7.5 French but functions well with 7.62x51) Above for $3500 Options Vomz modern PU scope +$400 Lake city 7.62x51 x275rds +$300 (local only) (not for sale separately) Shipping I believe is around $75 but that was a few years ago Located near Carstairs, AB

categories:Sporting GoodsGuns

6172 impressions

843 views

Selling because cash is tight and I have another - don't miss your chance to add this beautiful investment to your collection. This superb Webley WG Army specimen was made by P. Webley & Sons circa 1896 chambered in .476 Eley and .455 Webley, and sold by the famed John Rigby & Co. in London. Established in 1775, John Rigby & Co remains to this day a staple of the fine firearms market. Their role in this piece's history adds even further to collector value. These revolvers were very popular private purchases among sportsmen and higher ranking officers around the turn of the 20th century up through WW1 as reliable, accurate, and elegant handguns. With an impressive 6" barrel and mirror-bore rifling, this is a collector's or target shooter's dream. I can add a box of 50 factory new Fiocchi Heritage .455 Webley rounds with purchase of the revolver if you have a PAL. If you don't want these rounds, take $100 off asking price. As a pre-1898 antique, this can be owned and used without any registration or headaches. Visually this revolver retains most of its original shiny dark blue finish with scattered minor loss from 130 years living. The trigger, hammer, ejector, cylinder release mechanism, and hinge screw have a shiny silver "in the white" finish giving a proud and bold contrast. The original checkered square bottom hardwood grips are solid, showing some minor dings and a tiny chip on the right. Sharply stamped "WG Army Model" on the top strap with calibers ".455/.476" Webley and Eley, and the W&S winged bullet logo on the left of the frame. The barrel is hand etched with the retailer address "JOHN RIGBY & Co. 72 ST JAMES'S St LONDON S.W.". The serial 13XXX places manufacture in the mid-late 1890s and makes this one of the most modern antiques you can get. The bore retains shiny, strong rifling with scarce patches of wear. The action functions excellent in single and double action, leaving nothing to be desired. The cylinder indexes and locks up with almost no wiggle for reliable firing and the timing is excellent. Comes with FRT antique papers and repro leather Webley holster. Can come with box of Fiocchi .455 Webley ammo if you have a PAL. Call any time or local meetup Calgary or Vancouver depending where I am. Ships Canada No PAL, 18+ Check my ads for more antiques! I make no claims about the safety of shooting ANY antique. Check with your gunsmith! (Tags: England, Britain, French, MAS, German, Reichs, American, Canadian, Dominion, .44, .45, .450, .476, ACP, Auto, Boxer, Kynoch, Smith & Wesson, Remington)

categories:Sporting GoodsGuns

26302 impressions

1417 views