Frankford Arsenal bullet press $300 and stainless steel pin brass cleaner $250 Brand new. Used once

categories:GunsSporting Goods

9462 impressions

257 views

I am selling my 10/22 build, it works flawlessly, less than 500 rounds through, it doesn’t get used often so no point in having it, not looking for trades and I can ship any questions text me 403 928 0419 1. SBI C-71 receiver 2. DLASK 10/22 machined bolt 3. DLASK extended charging handle and action spring 4. DLASK automatic bolt release 5. DLASK extended mag release 6. Ruger 10/22 BX trigger 7. DLASK Stainless Steel, carbon fibre wrapped barrel 16.5” 8. Magpul x22 stock ( comes with spacers to change length of pull) 9. Vortex crossfire red dot 10. Ruger 10 round mag included

categories:GunsSporting Goods

11251 impressions

693 views

Brand new Non restricted Caliber: .223 Wylde Magazine: AR15 Capacity: 5 Action: Straight Pull / Pump Action Safety: Manual Thumb Safety Barrel Length: 16.5" Threaded Barrel Material: Stainless Steel Chassis Material: Aluminum Handguard: Aluminum (M-LOK) Finish: Cerakote Sights: Full Length Top Rail, Optic Ready Trigger Pull: 5-6 lbs. Overall Length: 38" Weight: 6.5 lbs. Made in Australia

categories:GunsSporting Goods

8524 impressions

503 views

Brand new Non-restricted Lever Action Caliber: .30-30 WIN Capacity: 6+1 Barrel: 20″ 5/8-24 Threaded 410 Stainless Steel (Armornite finish) Sights: Gold bead front sight,XS Sights ghost ring rear sight Accepts mounts compatible with Marlin® 1894 hole patterns Walnut Stock with textured grip panels Walnut Forend with textured grip panels Large loop operating lever Forged 416 SS Receiver (Armornite finish) Safety: Cross-Bolt Full Length: 37.8" Made in USA

categories:GunsSporting Goods

4984 impressions

230 views

For sale (Open to Trades) — Remington XCR II Key details Condition: Very good / fully functional — no issues. Receiver stamped 721. Re-barreled by first owner with a stainless steel barrel. Stock bedded for improved accuracy and consistency. Action: Remington (renowned reliability). Finish: XCR II features TriNitride coating — an extremely durable, high-performance surface treatment. Performance Fired at Genesee Range (Alberta): was able to hit steel at 500 m using a Bushnell 3–12×40 scope and Federal 150 gr / 180 gr ammunition. Functions reliably and as intended. Sale terms Local sale preferred. Shipping at buyer’s expense (buyer is responsible for transfer compliance). Open to trades — especially rifles in other calibres (this is surplus to my need) Notes XCR = Xtreme Condition Rifle.

categories:GunsSporting Goods

37776 impressions

2013 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Sako 85 Finnlight II Rifle, 30-06 SPRG, in a Cerakote Tungsten treated stainless steel action with an elastomer grip/black composite stock. It’s got a 22.4” fluted barrel, adjustable trigger (2-4lbs), 5rd magazine, and adjustable cheekpiece. SAKO Model #SBW3114A1930B4 I am the first owner of this brand new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served.
 Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Building on the famous Finnlight name, the Sako 85 Finnlight II is an icon reborn. The lightweight RTM fiberglass stock makes the rifle light to carry and the barrel has been treated with a weather resistant Cerakote® coating, which makes this rifle the perfect choice for all conditions. The fully adjustable cheek piece also makes the rifle perfectly customizable for your preferences. SPECIAL FEATURES * HIGH QUALITY RTM FIBERGLASS STOCK 
The composite stock is manufactured with aerospace grade RTM technology. All Finnlight II stocks have carbon fiber bedding to ensure maximum accuracy and stability in all temperatures.
 * BARRELED ACTION 
Cerakote® treated stainless steel action for maximum weather resistance.
 * SECURE GRIP 
The grip surfaces and the cheek piece are made from robust elastomer.
 * ADJUSTABLE CHEEK PIECE 
Maximum precision and unique comfort for each shot. STANDARD FEATURES * ACTION 
Sako 85 actions come in six different sizes (CSA), providing reliable functioning for each caliber. All Sako 85 models feature controlled cartridge feed (RCS) to eliminate double feed or cartridge jams. The turn-bolt handle places the hand in a natural position during bolt operation, which allows for rapid repeated firing.
 * BARREL 
Sako 85 barrels are manufactured with a passion for craftsmanship and the very best knowledge of Sako. Barrel blanks are drilled, honed, cold- hammer forged, finished and finally individually inspected by an optical fine-tuning instrument: the human eye. Twist rates are chosen for each caliber to optimize accuracy and bullet performance. Sako 85 barrels, blued or stainless, have a non-reflecting, satin-like surface – with the exception of the Sako 85 Deluxe and Safari models that have a highly polished finish.
 * MAGAZINE 
The staggered, two-row magazine of the Sako 85 is made of stainless steel. The detachable magazine can also be loaded through the ejection port. The Total Control Latch (patent pending) of the Sako 85 prevents accidental magazine release.
 * SAFETY 
The special two-way Sako safety locks both the trigger and the bolt handle. The unique bolt release button of the Sako Safety System allows you to load or remove a cartridge from the chamber while the safety is engaged.
 * SIGHTS 
Most of the Sako 85 models with a blued finish on the barrel are available with either standard or optional adjustable iron sights. The front bead is adjustable in elevation and the rear blade in windage.
 * STOCK 
The ergonomics of Sako 85’s walnut and synthetic stocks are built for an optimal shooting posture. The excellent balance and smooth bolt operation of Sako 85 rifles enable fast, straight and accurate operation.
 * TRIGGER 
The weight of pull of the single- stage Sako 85 trigger unit is adjustable from 1 to 2 kg (2–4 lbs). An optional single-set trigger is available for most Sako 85 models. All Sako 85 rifles have an extremely durable, all-steel trigger guard that protects the trigger. An exception to this are the Finnlight and Carbonlight models, which have a lightweight hard-anodized aluminium trigger guard. SPECIFICATIONS MPN - SBW3114A1930B4 Caliber - 30-06 Sprg Receiver Size - M Handedness - Right Weight - 2.8 kg / 6.17 lbs Total Length - 1090 mm / 42.9 in Barrel Length - 570 mm / 22.4 in Rate of Twist - 1:11" Magazine - Detachable Magazine Capacity - 5 + 1 Trigger - Single Stage Trigger Stock Material - Composite Stock Finish - Black Material - Cerakote Tungsten Muzzle Thread - No Cheek Piece - Adjustable Open Sights - No

categories:GunsSporting Goods

18248 impressions

634 views

**Still available if posted** Please include phone # and your email with communications as messaging replies don’t always get through. For quickest replies use text, use TownPost messaging with TownPost account or request my email. I have a brand new Browning X-Bolt Target McMillan A3-5 Ambush Rifle in 6.5 Creedmoor for sale. It’s a precision bolt-action target rifle in a Carbon Fiber McMillan A3-5 stock w/adjustable comb and with a stainless steel 26" fluted bull barrel with muzzle brake. Featured in Urban Carbon Ambush camouflage it’s got an 60 degrees bolt throw with an extended bolt handle, an adjustable feather trigger, 4 rd detachable clip, Pachmayr Decelerator recoil pad, 20 MOA Picatinny optics rail and bipod rail. I am the first owner of this new rifle but have not fired the rifle. **SEE MY OTHER RIFLE, RIFLE/SCOPE COMBO, SHOOTING AND HUNTING GEAR ADS** Valid PAL required, will come with transfer # as per new laws. First Paid, First Served. 
Holds only with deposit. Delivery Negotiable.
 Buyer pays for shipping costs and makes arrangements for payment. DESCRIPTION Browning X-Bolt Target McMillan A3-5 Ambush Rifle, 6.5 Creedmoor. Made to the high standards you expect from Browning, this quality X-Bolt Target McMillan A3-5 Ambush Rifle is chambered in 6.5 Creedmoor and comes equiped with numerous features. These features include the Carbon Fiber McMillan A3-5 stock with an ajustable comb, a free-floating fluted barrel with a muzzle brake on 5/8-24 suppressor threads, picatinny rail for bipod mounting, a gray stainless steel 26" bull barrel, an adjustable feather trigger, detachable rotary magazine, a urban carbon ambush finish and more. Included with this bolt action rifle is two quick detach swivel cups, a 20 MOA picatinny rail, and a glass bedded receiver with a matte blued finish. The McMillan A3-5 stocks are US Marine proven tough, and are proudly featured on these X-Bolt models. PRODUCT FEATURES - Carbon Fiber McMillan A3-5 Stock Marine proven tough, this premium Carbon Fiber stock comes with an installed adjustable comb, textured gripping surfaces, palm swell, a Pachmayr Decelerator recoil pad, and finished in an Urban Carbon Ambush. This stock is a variation of McMillan's famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock comes with a thumbwheel elevator system which allows for precise vertical adjustments. With the adjustable comb you can adjust and align your sight plane to match the scope - Decked out 26" Long Bull Barrel Manufactured from gray stainless steel, this free-floating fluted barrel includes a muzzle brake on 5/8-24 suppressor threads, a thread protector, and an embedded target crown - Extended Bolt Handle, Feather Trigger, and 20 MOA Picatinny Rail This ambush rifle includes a steel constructed, glass bedded receiver that features a matte blued finish, a 60 degrees bolt lift with an extended bolt handle, an adjustable feather trigger, detachable rotary magazine, top tang safety, and bolt unlock button. The X-Bolt's three-lever gold plated Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. Attaching the ideal scope or accessory is easy with the aluminum manufactured 20 MOA Picatinny rail as well attaching a bipod or light to the included bottom rail SPECIFICATIONS Model Code - 035451282 Action Length - Short Action Barrel Length - 26" Overall Length - 46" Length of Pull - 13 5/8" Weight - 10 lbs 0 oz Magazine Capacity - 4 Twist Rate - 7" Barrel Finish - Satin Gray Stock Finish - Urban Carbon Ambush Receiver Finish - Matte Blued Chamber Finish - Polished Barrel Material - Stainless Barrel Contour - Bull Stock Material - Carbon Fiber Recoil Pad - Pachmayr Decelerator Checkering - Textured Grip Panels Sling Swivel Studs - 2 QD Cups Receiver Material - Steel Trigger Finish - Gold Plated Bolt Slide Finish - High Gloss Magazine Type - Detachable Trigger Material - Alloy

categories:GunsSporting Goods

15343 impressions

602 views

Unfired, BNIB Browning BLR takedown rifle in 6.5 Creedmoor. It features a 20-inch stainless steel barrel, a laminated gray hardwood stock, a 4-round detachable magazine, and weighs approximately 6.8 pounds. Its unique takedown mechanism allows quick barrel removal without affecting accuracy. Not considering trades, the price is non-negotiable, and PAL verification is required. Prefer FTF sale in Edmonton but can ship at buyer’s cost.

categories:GunsSporting Goods

51966 impressions

2372 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. Can hold for a non-refundable deposit. Can also do a payment plan.  Popular and hard to find Marlin 1895 SBL (45-70) 1 also have 336 SBL (30-30) available. Fit and finish is excellent on these Ruger mades. Don'1 settle for a Remlin. Tariffs and poor exchange rate have increased the cost significantly for these rifles. Then add sales tax on top of that. You get a brand new in box rifle. Comes with evervthing it does from factory including hammer spur, manual and cable lock. Price is $3,250 for one rifle. Your choice of either 45-70 or 30-30. • Grey laminate stock with polished stainless finish • 19” cold hammer-forged stainless steel threaded barrel • High-visibility tritium fibre optic front sight, adjustable ghost ring rear sight Will ship at buyer's expense but priority will be given to local sale in Calgary. No trades. If you contacted me via email, check your junk/spam folder for my reply email. Some people have notified me that it was going to that folder.

categories:GunsSporting Goods

68317 impressions

3123 views

Designed specifically for the 17 Win. Super Magnum cartridge Adjustable AccuTrigger Stainless steel heavy barrel Gray laminate thumbhole stock Center-feed rotary magazine Compact action with rear locking lugs Thread-in barrel headspacing Soft rubber butt pad Designed specifically for the red-hot, flat-shooting 17 Win. Super Magnum cartridge, the B.MAG Target represents a whole new class of rimfire rifle. Thread-in barrel headspacing, rear-locking lugs and a cock-on-close bolt maximize accuracy at long ranges, while user-adjustable AccuTrigger™ technology allows crisp, customized trigger pulls. Added features include a stainless steel heavy barrel, gray laminate thumbhole stock, compact action, center-feed rotary magazine, and soft rubber butt pad.

categories:GunsSporting Goods

1109 impressions

72 views

*Please leave your phone number or email me directly, not through Townpost. There's an issue with Townpost relaying my reply emails. These are brand new and unused. Several available. Rangeview Sports sells these for $51 + tax. My price = $40 223/5.56 crimped 10/20 round mags. Canadian compliant LAR-15 Pistol Magazine. Legally hold 10 rounds. Get yours while you still can. 410 Alloy Stainless. Steel Heat treated. Coated Black. The 10/20s mags offer benefits in terms of maneuverability and ergonomics, especially when shooting in prone or other shooting positions. $40 each. Will ship at buyer's expense but priority will be given to local sale in Calgary.

categories:GunsSporting Goods

37011 impressions

1457 views

I have a lightly used Spartan 300 Bipod The Spartan Javelin 300 bipod answers the needs of users who require an ultralight weight bipod that can be installed in seconds and folded and locked under the rifle. Using its patented magnetic attachment system and utilizing a high quality 7000 series lightweight aluminum body, carbon fiber legs and stainless steel fittings. It has been designed with input from experienced hunters and US Special Forces operators. General Characteristics: · Height from 19 to 23 cm. and it only takes 21.5 cm in your pocket. · Weight of only 160 grams. · Rotation and ease of tilt allow a high degree of rifle displacement and leveling in the field. · Patented magnetic attachment system that allows instant installation and removal of the rifle. · Possibility of folding forward or backward along the rifle stock and locking in position. · Rubber and tungsten carbide caps, for different hunting environments. I bought this 2 years ago for $750 ($470 US with shipping, exchange, duty etc) I use my tripod 95% of the time so this had been in my pocked for most of my hunting trips. I can take photos and send them to you if you like - send me a note. I have added this link so you can see it https://www.muleyconnection.com/shop...tan-300-bipod/ https://carbinstore.com/en/products/spartan-300 https://www.airgunsofarizona.com/bip...tan-300-bipod/

categories:GunsSporting Goods

1175 impressions

62 views

Just got in 454 Casul Rossi M92 carbines stainless steel .NEW holds nine rounds.will shoot a 300 gr. Bullet at 2000 fps. 20% more power than 44 magnum. you can also use 45 long, colt ammunition. all fire I’m 15% off all ammunition 20% off.

categories:GunsSporting Goods

67873 impressions

5162 views

As of 2024-12-05, this product is no longer available for sale. Next expected availability October 2025. Stay strong Canada! Shipping across Canada included, *Email only please* 1 Part - $25 Shipped 2 Parts - $35 Shipped 3 Parts - $45 Shipped 4 Parts - $55 Shipped (Full Upgrade) *+$10 for the Low Profile Front Optic Rail **Any combination of the parts are available ***EMT is King Shipping via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design/invention/product) Double Tap Trigger Over Travel Limiter - Replaces the Factory Trigger Spring Plunger - Reduce the Over Travel by 85% for Quick and easy "Double Taps" - Material: Precision Machined Stainless Steel Extended Charging Handle - Replaces the Factory Charging Handle - 50% Longer and Knurled Finish for Easy Access - Material: Black Anodized Aluminum Extended Magazine Release Button - Replaces the Magazine Release Button - Larger Textured Protruded Release Button for Easy Access and Quick Magazine Change - Material: Black Anodized Aluminum Barrel Mounted Optic Rail - Mounts on the Barrel (Replaces Factory Rear Sights) - Prevents Optics from Losing Zero from Take Down - Rail Height is the same as the Receiver - Optional 3rd Mounting Hole. Rail can now be mounted forward/backwards 1/2". *Only 2 of 3 screws is sufficient for mounting. - Material: Black Anodized Aluminum Low Profile Front Optic Rail M-Lok - Mounts on the M-Lok handguard - Rail Height is the same as the Receiver - Designed to fit most front backup sights (BUS) secured via a single screw - 2x M-Lok Screw/Nut included - Black Anodized Aluminum

categories:GunsSporting Goods

157064 impressions

13727 views

Prices A- Double Tap Trigger Over Travel Limiter - $20 B - Aperture Ghost Ring Sights Set - $20 C/D - Extended Magazine Release (Right and Left Handed) - $25 **$5 off each additional part for any order combo (2 or more) **Ex. A+B=$35-($5 discount)=$30 Total **A+B+C=$20+$20+$25=$65-2*($5 discount)=$55 Total ***EMT is King Shipping included in the price via Canada Post Letter Mail (untracked 5-7 Business Days). Brand: Created by Cay (Yes it's my original design) Double Tap Trigger Over Travel Limiter - $20 Replaces the Factory Trigger Spring Plunger Reduce the Over Travel by 85% for Quick and easy "Double Taps" Machined Stainless Steel Aperture Ghost Ring Sights Set - $20 Replaces the Factory Open Sights Comes in a Set of Two (Large/Small Apertures) 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm) 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) Material: Precision Machined Stainless Steel Finish: Matte Black Oxide (Blued) Weight: 0.02oz (0.4g) **Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached** *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* Extended Magazine Release (Right and Left Handed) - $25 Replaces the Factory Magazine Release No Snag Design (Tab only on one side) Ergonomic Quick Index Finger Mag Release Compatible with the Charger Pistol Material: Precision Machined Aluminum Finish: Matte Black Anodize Weight: 0.56oz (16g) **Not compatible with older Metal Trigger Groups** **Mag Release does not fit certain aftermarket Archangel Stocks**

categories:GunsSporting Goods

52748 impressions

2289 views

Mod -M77 Mark 11 Cal 22 mag,223,243. Stainless steel Very good condition,C/W Rings Willing to ship Call or Text 780-584-2418

categories:GunsSporting Goods

51676 impressions

2980 views

The S8 wraps backwards over the barrel and makes the barrel look like a shorter barreled, suppressed firearm without doing either of those things. It is made out of a corrosion resistant stainless steel, nitrided black, for years of hard professional use. Although the linear compensator does not decrease the sound the firearm makes, it does direct that sound away from the shooter making the shooting experience a bit easier on the ears. The S8 compensator comes in 3 threading patterns: 1/2x28TPI (the .223 standard). 5/8x24TPI 1/2x36TPI The compensator requires a barrel diameter less than 1” with an unobstructed 2” of barrel behind the threads (before thing like gas blocks, front sight towers or bayonet lugs). If you have things like front sight posts that prevent a wrap around comp, consider the S9. The S9 was developed when customers running the ruger PC or the RDB couldn't use the S8 due to its wrap back design. The S9 is threaded in 1/2x28tpi Also shown is the S8 with a few barrel lengths combined with our HG handguards. WARNING: messages sent through townpost are not getting through. Please email me directly or text me directly.

categories:GunsSporting Goods

70115 impressions

3179 views

Ruger M77 Scout (.308 Win) – Compact, Powerful, and Versatile Great all-around rifle based on the scout-rifle idea—light, handy, and built to do pretty much any job. Chambered in .308 Win with a 10-round mag. Barrel is 5/8x24 threaded and comes with the flash suppressor. Has a solid stainless bolt, Mauser-style extractor, hammer-forged barrel, and a tough laminate stock. Peep sight in the back, post in the front. Just a reliable, easy-to-run rifle ready for hunting or whatever you throw at it. Features: The forward-mounted Picatinny rail allows for the mounting of modern optics, like an intermediate eye relief scope (not included), for "both eyes open" sighting and super-fast target acquisition. Also offers a built-in, accurate sighting system with ghost ring adjustable rear aperture sight and a non-glare, protected blade front sight. Detachable box magazine with push-forward magazine release just forward of the trigger guard. Patented integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy in the field (scope rings included). Soft rubber buttpad with buttpad spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear or defensive gear (three 1/2" spacers included). Free-floated, cold hammer-forged barrel with ultra-precise rifling that provides exceptional accuracy, longevity, and easy cleaning. Rugged and reliable with a glass-reinforced nylon trigger guard and magazine well. Non-rotating, Mauser-type controlled round feed extractor is the most positive case extraction system ever invented, and features a fixed blade-type ejector that positively ejects the empty cases as the bolt is moved fully rearward. Developed with Gunsite, this rifle is "Gunsite Approved" and features the Gunsite name rollmarked on the receiver and engraved on the grip cap of laminate stock models. Caliber: .308 Winchester Capacity: 10 Action: Bolt Stock: Black Laminate Barrel: 16.1", Free-Float, Cold Hammer-Forged, Threaded (5/8"-24) w/ Flash Suppressor Twist: 1:10" RH Safety: Manual Thumb Sights: Adjustable Rear, Protected Blade Front Overall Length: 37" Length of Pull: 12.75" Weight: 7.1 Selling some of my rifles to fund a long range pakcage in 300 wm, 308, 6.5cm and willing to trade accordingly. Shipping availalbe and on the buyer.

categories:GunsSporting Goods

2976 impressions

216 views

Want a new optic, and want to buy Canadian? There's a new option for Canadian glass, sort of: Apex Optics is based in Calgary, but its scopes are actually manufactured in Japan. Apex Optics was founded in early 2020 by a group of western shooters from a range of competitive disciplines. Their goal was to create a new optics brand for competition and long-range shooting reflecting their backgrounds (IPSC, Steel Challenge, 3-Gun, Precision Rimfire, Extreme Long Range, etc.). Several of these shooters are well-known in the west's shooting scene, with long history of competition. Apex's first release will be the Rival 4-32x56 mm, which it's been developing for about 18 months. Apex partnered with Japan Optics to actually manufacture the scope, although it's designed here in Canuckistan. The scopes also undergo quality control testing in Japan, and a secondary round of quality control in Calgary. This scope has some unique features due to its design process, including Apex's proprietary CLR competition reticle. This first focal plane reticle is designed for long-range matches where shooters need their scope to handle quick transitions, with top half of the reticle unobstructed. It comes with ranging marks, for scenarios where you can't use electronic rangefinders, and has six-level illuminated main stadia. You can see a full explanation of the CLR reticle design at Apex's website. The scope also comes with elevation turret that features 15 MILs per revolution; windage and elevation adjustments are 0.1 MIL per click. The turrets are not locking, but come with mechanical zero stop and two-turn indicators (future scopes may come with locking turrets). There's a stainless steel pop-up turn indicator. Apex says it has the industry's first see-through integrated and removable throw lever. The new Rival scope has parallax knob indicators for approximate value for 100-, 200-, 500-, and 800-yard distances. There's a proprietary hydrophobic seven-layer multi-coated lens, and other features selected to give Apex's customers top performance. The scopes are certified IP67 dustproof/waterproof, and 1200G shockproof. THE BEST WARRANTY YOU'LL NEVER HAVE TO USE. WORLD-CLASS SUPPORT WHEN YOU DO, THAT IS OUR OATH TO YOU! All of our products carry a Lifetime Warranty. We’ll replace any product if it’s not up to our standards of quality and durability, no questions asked. If something stopped working as it should, then let us know and we’ll take care of it at no cost to you. The only things we don’t cover are “Acts of God” like fire, lighting strikes and flooding. Most of those scenarios are typically covered by your insurance. We also don’t cover theft or intentional/neglectful damage or destruction.

categories:GunsSporting Goods

71742 impressions

4819 views

Savage Elite Precision 300 win mag All accessories are not included No trade Description The 110 Elite Precision is the pinnacle of the Savage’s 110 designs. They’ve begun with the time tested Model 110 action and then rethought every aspect of the rifle. The overhaul includes all of the upgrades demanding shooters make to their long range tack drivers. The 110 Elite Precision has an Adjustable Core Competition chassis from Modular Driven Technologies (MDT). From its full length ARCA rail to its titanium nitride coatings, this is a rifle built for a lifetime of Elite Precision. FEATURES * Savage factory blueprinted action * MDT ACC aluminum chassis with fully adjustable stock * ARCA Rail along the entire length of the chassis * Stainless steel, flash nitride target receiver * Titanium Nitride bolt body * 1.5 – 4 lb user adjustable AccuTrigger * Self timing taper aligned muzzlebrake (Short Action Calibers Only) * MDT Vertical Grip and AICS magazine * Modified Palma contour barrel * 1-Piece 20MOA Rail Action: Bolt Ejection Port: Right Barrel Color: Natural Barrel Finish: Matte Barrel Length (in)/(cm): 30 / 76.200 Barrel Material: Stainless Steel Caliber: 300 WIN MAG Magazine Quantity: 1 Magazine Capacity: 5 Hand: Right Length of Pull (in)/(cm): 14-15.5 / 35.560 Magazine: Detachable Box Magazine Overall Length (in)/(cm): 49.75-50.7 / 126.365 Rate of Twist (in): 1 in 10 Receiver Color: Black Receiver Finish: Matte Receiver Material: Stainless Steel Type: Centerfire Stock Color: Grey Stock Finish: CeraKote Stock Type: Chassis Weight (lb)/(kg): 14.95 / 6.78

categories:GunsSporting Goods

78081 impressions

4622 views

Description New in box Unleash the power of tradition with the Marlin 70432 1894 SBL, a modern take on a classic lever-action design, perfect for Canadian hunters, sport shooters, and collectors. Chambered in .44 Magnum, this rifle combines rugged performance with exceptional craftsmanship, making it an ideal companion in the field or on the range. The Marlin 1894 SBL is designed to meet the needs of Canadian firearms enthusiasts who value quality, versatility, and performance. Its .44 Magnum chambering offers outstanding stopping power, while its rugged construction ensures reliability in tough Canadian conditions. Features Stainless Steel Barrel and Receiver Durable Grey Laminate Stock Large Loop Lever XS Lever Rail w/ Ghost Ring Sights 8+1 Round Capacity 16.1″ Barrel Length Specifications Model# 70432 44 Rem Mag / 44 Special Chambering Grey Laminate Stock Stainless Steel Material Polish Stainless Finish Fiber Optic Front Sight w/ Tritium Rim Adjustable Ghost Ring Rear Sight 6.3 lbs. Overall Weight 33.25″ Overall Length 13.38″ LOP 16.1″ Barrel Length 5/8-24 Threaded Barrel Match-Polished Thread Cap Cold Hammer-Forged Stainless Steel Barrel 1:20″ RH Twist, 6 Grooves

categories:GunsSporting Goods

56822 impressions

2205 views