1) Winchester M88 + M100 Folding Rear Sight   -  $100.00 . 2) Winchester M88 + M100  - Front Sight Insert  -  $75.00 . 3) Winchester M88 + M100  - Front Sight Hood  -  $40.00 . 8) Winchester Pistol Grip Cap Scroll Insert Only -   $25.00 . 9) 6-48 Filler Screws (4) - Blue   $20 . 10) 3/8" DT Filler - Curved Top - $45 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com . Click on my name "Jack Daniels" to see my other ads

categories:Sporting GoodsGuns

87057 impressions

4603 views

1) Win 9422 - Rear Sight w/ 3C Elevator - $170.00 2) Win 9422 - Front Sight Insert - $85.00 3) Win 9422 - Front Sight Hood - $40.00 4) Win 9422 - 3C Elevator - $50.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

19664 impressions

362 views

1) Winchester 40A Rear Sight - (M1903) - U Notch - (80%) - $90.00 2) Winchester 40A Rear Sight - (M1903) - U Notch - (95%) - $120.00 9) 6-48 Filler Screws (4) - Blue - $20.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

16719 impressions

365 views

1) Win pre 64 M70 - Trigger & Sear with Springs - $155.00 - 2 Available 2) Win pre 64 M70 - Bolt Stop & Release Pin + Spring - $55.00 - 2 Available --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

48388 impressions

904 views

HAD A STROKE AND MOVING CLOSE TO KIDS. 1980 BOXFORD MODEL 330 IS 13X40, 1/12 BORE, 3PHASE 220VOLT (PHASE CONVERTER INCLUDED) 2.5/1.75HP 2SP MOTOR,30-3000 RPM, ELECTROMAGNETIC BRAKE, CHANGE GEARS FOR 31/2-128 TPI (.2-7MM),TAPER ATTACHMENT, COOLANT PUMP, 4-JAW PRATT BURNERD CHUCK, 3 JAW PRATT BURNERD,6 TOOL HOLDERS DREHBLITZ 7.5 DEGREES ADJUSTMENT, 10'' FACEPLATE, STEADY REST,MISC TOOL ACCS. $45,000.00 #1 MILLING MACHINE,R8 SPINDLE, USED FOR MOSTLY FLUTEING BARRELS, 220-3400RPM, PULLEYS, 1''X 8"X 36'' ALUMINUM TABLE EXT., 20'' TABLE TRAVEL,SERVO POWER FEED,TILT HEAD 45 DEG., SWIVEL HEAD, $15,000. LARGE TOOL BOX WITH INSERTS, DRILL BITS & MISC.MEASURING INSTRUTMENTS. $3000.00. RIFLE BARREL CART WITH MISC TAKE OFFS, $1000.00 #2 MILL IS A CRAFTEX 601, 33 X 81/2 TABLE, CUSTOM STAND FOR COOLANT,DC VARIABLE SPEED, 50-2300RPM, 110VOLT- 12AMP, 4"HOLME VISE, 6'' DIVIDING HEAD, R8 SPINDLE, $8000.00. GUN RACK FOR STANDING GUNS, 2- 6'' GRINDERS'. WORK BENCH WITH VICE & BBL VICE, $3000.00. MISC. JIGS AND FIXTURES, DRILL PRESS WITH HEAVY STAND MADE WITH VICE AND 2 TON ARBOUR PRESS, $1000.00 BALDOR 10" BUFFER WITH STAND, POLISHING GRIT, WHEELS, $2000.00-4 BLUING TANKS WITH STAND AND SOME RUST BLUE, $1000.00 8"BANDSAW LIKE NEW, $750.00. BLASTING CABINET IS SILICONE SEALED FOR INDOOR USE, ALO GRIT, NEEDS A VACUM, $1000.00 3 MONTHS OF TRAINING WITH MACHINES(I HAVE LOTS OF WORK)$10.000 MONTH IF NEEDED.

categories:Sporting GoodsGuns

7030 impressions

524 views

Replace cracked, missing, and worn grips or safeguard your minty originals by swapping to a new pair that you're ok with taking a beating in the field. I am selling reproduction revolver grips for models of revolvers/handguns including antique and modern and can source plenty more if interested. I also have holsters for antiques available! Check my ads for more. Antiques were made before CNC machining, meaning there can be slight variation between different examples of the same model. Grips may be slightly oversize allowing them to be ground down to size, slightly undersize, or require minor adjustment of the interior face or grip peg hole to fit just the way you want. I can also get plenty of butt plates for shotguns and rifles. Inquire to see if I can help you. Also reach out if you need a leather holster to protect your revolver. Price starts at $100 per grip pair with shipping anywhere in Canada, discounts for bulk order possible. Current stock includes: Colt 1873 Single Action Army / Peacemaker ivory-like Colt 1877 Thunderer/Lightning .41 Colt SAA faux bison White & Black Webley Mark 1 (Mk I) for .455, .45 ACP, and .45 auto rim service revolver White & Black Webley Mark 2, Mark 3, Mark 4, Mark 5 (Mk II, Mk III, Mk IV, Mk V) for .455, .45 ACP, and .45 Auto rim service revolvers Smith & Wesson No. 3 New Model for .44 single action revolvers Smith & Wesson No. 3 Russian ivory-like for .44 Russian single action revolvers Smith & Wesson DA .44 I can source most grips and butt plates for makes of pistols and long guns such as Beretta, Benelli, CZ, Colt, Forehand & Wadsworth, Harrington & Richardson (H&R), Hopkins & Allen, Ithaca, Iver Johnson, Luger, Marlin, Mauser, Pietta, Remington, Ruger, Springfield, Savage, Sig Sauer, Smith & Wesson, Stevens, Tokarev, Uberti, Walther, Webley, and more.

categories:Sporting GoodsGuns

47865 impressions

917 views

Winchester Model 1894 38-55 Ref #1040 This Winchester is a lever action, sporting rifle, octagon barrel, full mag. Dated 1895 Stock is very good – good. Small tang crack 1” long, and a minor chip gone at tang. Forearm has an app. 2” crack and a few very minor cracks. The stock has typical bang marks. Finish appears original or period correct. Original metal recoil pad fits well. Barrel is 26” long with sights intact, rear sight may have been replaced at one time, again period correct. Bore has black powder corrosion but it’s clean now and has rifling top to bottom. Bluing appears original and app. 75-85% throughout. There are bumps and scratches on metal and evidence of minor surface rusting. Screws have been used, but in very good shape. The lever functions well, safety checks out and the trigger pull, and drop are good. Firing pin is evident and protrudes when pushed on. Ejector is intact and tight, and magazine follower functions correctly. Overall, I grade this firearm as very good and should be fully functional. I did not test with snap caps or fire. Only reasonable offers are considered. Low ball offers will not be responded to. Trades in person only. The firearms and accessories I sell may be new or used and are usually acquired through estate liquidations. I visually inspect them and check basic operation only and share what I know or find in the description and photos. They are not live test fired. I provide full disclosure on what I find but can not be held responsible for what I may miss. It is your responsibility to have your firearm inspected by a competent gunsmith before firing, shoot at your own risk. I am not a gunsmith. I do not warrantee these guns or any associated accessories, nor do I accept returns. They are, as is, where is, and all sales are final. On final purchase you have accepted full responsibility for the item. E-transfer or cash only. S/H & insurance are extra. Tracking number will be provided. I require your full name, PAL #, date of birth and email address for licence verification for firearms and ammunition. Thanks, Darcy Darcy's Estate Liquidations

categories:Sporting GoodsGuns

23714 impressions

840 views

Selling/trading a few Dan Wesson Model 15 barrels and parts. The two prohibited barrels will require a valid 12(6) license to purchase, and the restricted barrels will require a valid restricted license. As follows: 1. 8" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 2. 6" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 3. 4" vent rib barrel, solid underlug w/ shroud. Bore very good. $495 shipped 4. 2" vent rib barrel, solid underlug w/ shroud. Bore very good. SOLD 5. 4x interchangeable front sights (2 white, 2 yellow). $45 each 6. Spring Kit #12 (assuming factory). $20 7. Wood grips, modified to fit a smaller hand. $50 8. Factory "Pistol Pack" case w/ correct yellow lined inside (no keys for locks). $195 shipped I'll be keeping one of the non restricted barrels, whichever one is left after the first one sells. Shipping included on the barrels and case, flat rate shipping of $18 on the sights, springs and grip. Open to selling the collection as a lot. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4553 impressions

683 views

Selling/trading a few barrels. Prices include shipping. As follows: 1. Remington 700 24" .300 WSM barrel, matte finish, normal marks and dings, bore excellent - $125 2. Remington 700 22" .308 Win barrel, blued finish, normal marks and dings, bore excellent - $125 3. Winchester Model 70 Classic Stainless 24" .300 Win Mag barrel, dings and marks in the finish, bore excellent - $150 4. Winchester Model 70 aftermarket 23" .338 Win Mag barrel, dings and marks throughout, bore excellent - $150 5. Winchester Model 70 Classic Stainless 20" .375 H&H Mag barrel, magna ported, marks and dings, bore excellent - $150 As stated above, prices include shipping. Willing to work out a package deal for more than one barrel. Open to all trades. Pm or text/call 204 795 2850 for more info.

categories:Guns

22793 impressions

1577 views

Made in Finland M22000 Valmet Jyvaskyla Standard . 22LR Competition single shot bolt action. 27.5" heavy competition barrel. Adjustable butt plate and set trigger. Friction T channel sling slot. Profiled competition heavy stock for right handed use. Bushnell 3-9 x 20 scope with dovetail rails on receiver. Drilled and tapped for rear sight with front sight mount. VKT (Valmet), or the State Rifle Factory became operational September 9, 1928. Since 1930 Valmet's factory rifle club was active as well, having their hand in the design of the Finnish Lion, together with Aimo Lahti, the chief designer. 2. The Finnish Lion has the longest manufacturing time of all Finnish guns, from 1930 to 1979. Models are: M30 (prototype), M31 mod I, mod IIa, IIb, IVb, IVc, M35, M45, M52, M55, M59, M62, M65, M70, M200002 (Finnish Lion Standard) and wild boar version. Heavier models were the Finnish Lion Match and Champion. Two lighter version were also made, Junior and Pikku Leijona (Little Lion). 3. Serial numbers start from #1 (1932), and end into # 14,358 (1979). 4. The bolt and trigger are said to have been ahead of their time. The lock time is fast. Also the barrels were accurate. Champion models should have a set trigger, which makes lock time longer, but reduces pull weight. 5. Some of Vlamet's success in competition: WORLD RECORDS: -Lucerne 1939, 40 shots prone -400 points, Toivo Mänttäri -Buenos Aires 1949, 3x40 team contest 5770, finnish team, 40 shots standing, 380 points, Pauli Janhonen WORLD CHAMPINSHIPS -Buenos Aires 1949, 3x40 shots, 1165 points, P. Janhonen -Stockholm 1947, 40 shots standing, 377, H. Erben 6. The Helsinki Olympics in 1952 was the prime time of the Lion. A quarter of all shooters shot the Lion, prone gold was won by a Romanian - a Mr. Sirbu, score 400. CFP/RCMP courtesy of Bill C-71 require any firearm to have a transfer registration number approved by the CFT to sell, give or transfer as of MAY 18, 2022. Seller needs the full name and PAL of the buyer with DOB and email as on file with the CFP. Seller then submits information on the RCMP CFP Individual Web Services which confirms the buyers PAL as valid or not with a Reference Number. Failure to do so is subject to Sections 99 & 101 of the Criminal code.

categories:Sporting GoodsGuns

39042 impressions

1460 views

1) Remington No. 701 Rear Sight w/ Elevator $75.00 6) Remington Dovetailed Front Sights $75 - $85 7) 6-48 Filler Screws (4) - Blue - $20.00 8) 6-48 Pan Head Filler Screws (4) - Blue - $20.00 9) 6-48 Filler Screws (4) - Stainless - $20.00 10) 8-40 Pan Head Filler Screws (2) - $20.00 11) 3/8" DT Filler - Curved Top - $45.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

24797 impressions

553 views

1) Redfield WB-670 Receiver Sight Mounting Plate w/ screws (0.60" C-C) - $45.00 2) Redfield R-40x Receiver Sight Mounting Plate w/ screws (0.60" C-C) - $45.00 3) Redfield 75 Mounting Block 75 RTA (.83" C-C) 1.12" Long - $15.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

33732 impressions

970 views

1) Remington 600 Rear Sight, Plastic Base, & Screws (w/o Vent Rib)  -  $145.00 . 2) Remington 600 Rear Sight & Screws (w/ Vent Rib - No Plastic Base)  -  $135.00 . 3) Remington 788 Rear Sight, Plastic Base, & Screws   -  $145.00 . 4) Remington 788 Front Sight, & Screw   -  $45.00 . 5) Remington 581 Rear Sight w/ Screws   -  $135.00 . 14) 6-48 Filler Screws (4) - Blue  -  $20.00 . 15) 6-48 Pan Head Filler Screws (4) - Blue  -  $20.00 . 16) 6-48 Filler Screws (4) - Stainless  -  $20.00 . 17) 8-40 Pan Head Filler Screws (2)  -  $20.00 . ---- . DO NOT USE THE MESSAGING SYSTEM ! . Phone Calls - 403-885-2149 (No Cell Phone so No Texting) . E-mail - slc6546@gmail.com

categories:Sporting GoodsGuns

47831 impressions

1323 views

1) Winchester Post 64 M94 - Rear Sporting Leaf Sight w/ Elevator - $170.00 2) Winchester Post 64 M94 - Elevator for Rear Sight - $50.00 3) Winchester Post 64 M94 - Front Sight Silver Beaded Insert - 80.00 4) Winchester Post 64 M94 - Front Sight Hood - $40.00 5) 6) Winchester Post 64 M94 - Finger Lever Pin Stop Screw - $40.00 7) Winchester Post 64 M94 - Link Pin Stop screw - $35.00 10) Winchester Post 64 M94 SRC Front Band Screw - 40.00 11) DT-1 Marble's 3/8" Dovetail - Curved Top - $45.00 12) 6-48 Filler Screws (2) - Blue - $10.00 --- DO NOT USE THE MESSAGING SYSTEM ! Phone Calls (No Texting) 403-885-2149 or E-mail - slc6546@gmail.com Click on my name "Jack Daniels" under the post date below to see my other ads

categories:Sporting GoodsGuns

78909 impressions

2895 views

Please text anytime 6476871484. Antique revolver in ready to shoot like new excellent condition ,very smooth action. No PAL needed. Comes with FRT RCMP paperwork. Ammo is available but sold separately. This one is compact concealed carry version of famous Colt M1877 "Thunderer" was made for self defense and fast action. With "bulldog" type short barre and no regular extractor on the side this revolver made for concealed carry and optimised for fast action. The action is strong and crisp, and the cylinder indexes and locks properly, without any play in the cylinder. The bore of the 2 1/2-inch barrel is excellent mirror bright with strong rifling. The black hard rubber grips are very good and undamaged. SN 82458. ​ History & Background The M1877 was Colt's first double action revolver. Colt insisted on inventing their own double action mechanism, partly because there were numerous patents for DA revolvers in effect, which Colt did not want to infringe upon, but also because they trusted their chief engineers William Mason and C.B. Richards to come up with an original design. For this reason, the M1877's action is like a Swiss clock: it is somewhat convoluted and complicated, and it has earned the nickname "the gunsmith's favorite" over time. The gun did enjoy tremendous popularity however, and was manufactured for 32 years, even after Colt had improved the mechanism and simplified it considerably in later years. The M1877 was available in three calibers - .32, .38 and .41, and was originally called "Lightning". Later collectors coined the name "Rainmaker" for the .32 and "Thunderer" for the .41. In Canada, only the .41 caliber gun with serial numbers below 107,000 is considered an antique, as the others are either exempt calibers, or made after January 1, 1898.

categories:Sporting GoodsGuns

17989 impressions

1617 views

Selling/trading a Winchester Model 12 Deluxe Trap Grade 12 gauge. Overall it's in nice shape. 32" solid rib barrel, takedown model, with European straight grip stock, 2 3/4" chamber, fixed full choke. Steel has turned to a nice patina throughout with no major flaws other than some light freckled spots here or there. Wood stocks are in good solid shape with original checkering still present, normal bumps and marks here and there. Original black diamonds are still present at the wrist on each side. Butt plate is missing one screw (will replace if I can find one) and is not original to the gun, slightly ill fitted, but is an original Winchester butt plate. Bore is in nice shape. Overall a very solid M12 Trap. Looking for $1395 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

829 impressions

64 views

Local Sale/Trade only BSA Martini Model 12 (1936) Canadian Military Trainer with broad head markings Heavy barrel Single shot Falling Block 22LR Excellent condition Excellent wood Original bluing Bore is bright and shiny Functions and shots great. Will trade for interesting heavy barrel bolt action rifle

categories:Sporting GoodsGuns

1130 impressions

99 views

Selling/trading a Winchester Model 12 pump action 12 gauge. Overall it's in very nice shape. Made in 1954, 30" barrel, 2 3/4" chamber, fixed full choke. Bluing ice every nice shape throughout with only light blemishes here or there. Stocks are very nice, top of the butt stock has some normal finish loss. Bore is in very nice shape. Takedown is tight. Overall a very nice solid M12. Looking for $495 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3951 impressions

386 views

Selling/trading a Savage Model 12 in .204 Ruger. Overall it's in very nice shape. 26" heavy barrel, internal box mag. Bluing is in very nice shape, a few light marks here or there - all minor. Sitting in a Boyds At-One adjustable stock. Stock is all in very nice shape as well, a few normal marks here or there. Bore is very nice. Comes topped with a Weaver pic rail. Looking for $1495 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

4002 impressions

408 views

Selling/trading a Savage Model 12 BTCSS in .204 Ruger. Overall it's in very nice shape. 26" stainless fluted heavy barrel. Steel is all in very nice shape throughout with very few notable imperfections. Laminate thumbhole stock is also in very nice shape, a few light bumps and marks here or there. Bore is very nice. Comes topped with a set of stainless bases and will come with one detachable magazine. Looking for $1795 shipped. Insurance by request on buyer. Open to all trades. Can send more pictures upon request. Pm or text/call 204 795 2850 for more info.

categories:Sporting GoodsGuns

3960 impressions

358 views

This is a nice savage model 12 with a heavy barrel accu trigger spider vein green stock. comes with scope mount and rings, nice precision rifle in a 204 ruger caliber

categories:Sporting GoodsGuns

6468 impressions

615 views